Small Galvanised Auto Gate Catch with Striker and Screws, Self-Latching

Share this product

Satisfaction Guaranteed.
Secure Payments
Refund policy
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk

A small self-latching gate catch that drops over a striker as the gate closes. The body fixes to the post or gate and the cranked striker fixes to the other part, so that when the gate closes the arm rides up over the striker pin and drops behind it. Lift the thumb tab to open the gate again. It is a small galvanised catch for side gates, garden gates and light timber or metal field gates, and it comes with the striker and screws. The price shown is for one catch with its striker, with a minimum order of 10, because these are usually bought for a run of gates or site repairs.

Why this part works

Closes without a second hand. Swing the gate shut and the catch does the rest, which is useful when you are carrying something through.

Quick lift to release. The thumb tab lifts the catch arm clear of the striker, so opening it needs no key or tool.

Galvanised for outdoor use. The galvanised finish is suited to exterior gates and fencing, including gates that stay out in all weathers.

Supplied with the parts you need. The striker and screws come with the catch, so you only need a screwdriver or drill to fit it.

Where it is used

Side gates, garden gates, allotment gates, pedestrian gates in fencing, and small field gates. It is a light catch for the smaller gate, and it is not a lock. On a larger or heavier gate, step up to the large auto catch or a heavier self-locking catch.

Specifications

What you get	One catch, one striker and screws, minimum order 10
Body	60mm x 59mm, 44mm high
Body fixing holes	33mm x 27mm centres
Striker	105mm long, 30mm offset, two holes 25mm apart, 11.5mm wide
Finish	Galvanised
Fixing	Screw fix, screws supplied
Weight	About 0.29 kg

Choosing the right option

Choose this small catch for a light gate that should latch itself when it swings shut. The striker offset is 30mm, so check there is room between the gate and the post for the arm to clear it. For a bigger gate, or a gate that sees heavier use, the large auto catch has a bigger body and a longer striker. If you need the gate to lock, this is not the right part: fit a separate bolt or lock.

You want	Choose
Small self-latching catch	This catch
Large self-latching catch	Large galvanised auto gate catch
A sliding bolt instead	Sliding barrel bolt, 60 x 40mm
A traditional thumb latch	Gothic Suffolk gate latch

Fitting and care

Fix the catch to the post at the height you want, then close the gate to the position it should latch in. Hold the striker on the gate so the pin sits in the throat of the catch, mark it and fix it with the screws supplied. Open and close the gate a few times and adjust if the arm drags or fails to drop.

Keep the pivot of the arm lightly oiled and check the screws are tight once or twice a year. Clear any debris from the catch throat so that the arm can fall freely.

Frequently asked questions

Is the price for one catch?

Yes, the price is for one catch with its striker and screws, and the minimum order is 10. Call us about larger quantities and we will confirm availability before you order.

Does it lock?

No. It is a self-latching catch, so it holds the gate shut but it can be opened by hand from either side.

Will it suit a metal gate?

Yes, with suitable fixings for the metal frame. Screws are supplied for fixing to timber; use self-tapping or machine screws on steel.

Is it suitable for a heavy gate?

It is the small size. On a large or heavy gate, please use the large auto catch or a heavier self-locking catch.

Ordering and delivery

Order 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.