-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need to park a lot of bicycles in a straight run without setting out and excavating for every hoop, a Sheffield toast rack cycle stand is the quickest way to do it. Each rack is a row of full-size Sheffield hoops welded at 800mm centres to two box-section floor rails, so the spacing is fixed in the factory and the whole unit bolts down to existing concrete in one go. Choose galvanised steel in 2 to 8 stands, or grade 304 stainless steel in 2 to 5 stands. Every stand parks two bicycles, one either side of the hoop, so a 5-stand rack takes 10 bikes. Fixing bolts are not included.
Why a toast rack works
The spacing is already set
The hardest part of laying out individual Sheffield stands is getting the gaps even and leaving enough room for two bikes per hoop. On a toast rack the hoops are welded to the rails at 800mm centres, so every bay is the same and there is nothing to measure between stands.
No excavation for each hoop
Cast-in stands need a hole and concrete for every leg. A toast rack sits on its rails and bolts down with M12 bolts into a suitable concrete surface, so you avoid digging, shuttering and curing time. That suits retrofitting cycle parking on to an existing slab or car park.
Familiar Sheffield profile
Each hoop is 800mm high by 800mm wide, the classic inverted-U shape cyclists already know how to lock to. A rider can secure the frame and a wheel to the hoop with a D-lock or cable.
- 800mm centres, two bikes per stand
- Bolt-down M12 fixing (bolts not supplied)
Where it's used
Toast racks suit anywhere cycle parking is needed in numbers: school and college bike parks, office and business park forecourts, railway and bus station approaches, hospital and leisure centre car parks, retail parks and town-centre streetscapes. Stainless suits prestige frontages; galvanised is the economical choice for schools, depots and car parks.
Specifications
| Hoop size | 800mm high x 800mm wide (outside); 752mm between legs |
|---|---|
| Stand centres | 800mm centre to centre |
| Bikes per stand | 2 (one either side of each hoop) |
| Floor rails | Galvanised: 50 x 50mm box section. Stainless: 50 x 25mm box section |
| Material / finish | Galvanised steel, or stainless steel grade 304 |
| Sizes | Galvanised: 2, 3, 4, 5, 6, 7 or 8 stands. Stainless: 2, 3, 4 or 5 stands |
| Weight, galvanised | 2 stands 19kg, 3 stands 32kg, 4 stands 45kg, 5 stands 58kg, 6 stands 71kg, 7 stands 84kg, 8 stands 97kg |
| Weight, stainless | 2 stands 18kg, 3 stands 29kg, 4 stands 40kg, 5 stands 51kg |
| Overall rack length | Varies with number of stands; exact rail length per size not published for this line |
| Hoop tube diameter | Not published for this line |
| Fixing | Surface mounted with M12 bolts to a suitable concrete surface; bolts not included |
| Clearance | First stand no closer than 400mm to the nearest obstruction |
| Guarantee | 12 months, when installed and used correctly |
Choosing the right option
Finish. Galvanised steel gives a hard-wearing zinc coating with a matt grey, utilitarian look and the lowest cost per bike space. Grade 304 stainless steel keeps a bright metallic finish, suits modern architecture and frontages where the rack is on show, and is the choice where you want the stand to look tidy for longer. Note that the stainless rack uses a 50 x 25mm rail and is offered up to 5 stands.
Number of stands. Count your bikes and halve it: 2 stands park 4 bikes, 4 stands park 8, 8 stands park 16. For longer runs, set several racks end to end, keeping the 800mm spacing between the last hoop of one rack and the first of the next. Smaller racks are easier to handle on site: the 8-stand galvanised rack weighs 97kg.
Installation, use & care
Install on sound, level concrete. Position the rack, mark the holes in the floor rails, drill and fix with M12 anchor bolts suited to your slab (not supplied). Keep the first stand at least 400mm from any obstruction and leave clear access along both sides of the rack. Wash with clean water and mild detergent; avoid wire wool or abrasive pads on stainless steel.
Frequently asked questions
How many bikes does each size hold?
Two per stand, one either side of each hoop. The 2-stand rack parks 4 bikes and the 8-stand galvanised rack parks 16.
Are the fixing bolts included?
No. The rack is supplied without fixings. It is designed to be bolted down with M12 bolts into a suitable concrete surface, so choose anchors to suit your slab.
Can it be cast into the ground instead?
This rack is made for surface fixing on its floor rails. If you need cast-in stands, look at individual Sheffield stands with cast-in legs instead.
Can I join racks together for a longer run?
Each rack is a separate unit, but several can be placed in a line. Keep the hoops at 800mm centres across the joins so every bay stays usable.
Ordering & delivery
Choose your finish and number of stands above and order online. For larger schemes, site deliveries or quotes for several racks, call us on 01744 520110 or email sales@industrialsuppliesco.co.uk and we will confirm lead time and delivery to your site.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



