Ring Gate Latch 150mm, Hot Dipped Galvanised, for Gates up to 75mm Thick, Fixings Included

A ring gate latch is the classic way to close a timber garden gate. Turn the ring and the latch lifts, release it and the gate is held shut. It works from both sides of the gate, because the external ring handle lets you open the gate from outside as well as inside. This 150mm ring gate latch is hot dipped galvanised and suits gates up to 75mm thick. Each backplate measures 70mm x 70mm and fixings are included. It is designed for light domestic timber gates: side gates, garden gates and bin store doors. Homeowners, handymen and fencing contractors fit them to new gates or use them to replace a worn or rusted latch.

Why it works

Opens from both sides

A spindle runs through the gate and connects the inside latch to the external ring handle. Anyone outside can turn the ring to lift the latch bar out of its keeper, and anyone inside can do the same. There is no need to reach over the gate.

Hot dipped galvanised

The latch is hot dipped galvanised. That zinc coating gives it extra protection against rust in the open air, which matters on a gate that stays outside all year round.

Simple and reliable

A gravity latch has very few moving parts. The bar drops into the keeper under its own weight when the gate closes, so there are no springs to fail and nothing to adjust.

Fixings included

The fixings come with the latch, so the job can be finished in one visit with a drill and screwdriver.

Where it's used

• Timber side gates and garden gates
• Bin store and log store doors
• Shed and outbuilding doors
• Replacing a worn latch on an existing gate

Specifications

Choosing the right option

This listing is one size: the 150mm galvanised ring gate latch. Check two things before you order.

Gate thickness: measure through the gate where the spindle will pass, including any framing or ledges. The latch suits gates up to 75mm thick. Most garden and side gates are well within this.

Gate weight and use: the supplier describes it for light domestic timber gates. For heavy field gates, driveway gates or gates that need locking, choose a heavier latch or add a padlockable bolt alongside.

A ring gate latch suits a closeboard or ledged-and-braced gate where you want to open it from both sides.

Fixing position: fit the latch at a comfortable hand height, usually around 1m from the ground, on a rail or ledge where the timber is solid enough to take the screws. Avoid fixing into the thin edge of a single board, which can split.

Installation, use & care

Hold the latch bar on the inside face of the gate with its end over the post, then mark the spindle position. Drill through the gate for the spindle. Fit the inside ring and latch bar, push the spindle through, and fit the outside ring handle so both rings turn together. Fix the keeper to the post so the bar drops in cleanly, then fix the bar guide. A drop of oil on the pivot each year keeps it moving freely.

FAQ

Can the gate be opened from outside?

Yes. The external ring handle lets you open the gate from outside as well as inside.

Are screws included?

Yes. Fixings are included.

How thick a gate will it fit?

Up to 75mm thick.

Can I fit it to a metal gate?

It is designed for light domestic timber gates.

Will it rust?

It is hot dipped galvanised for extra protection against rust outdoors.

Ordering & delivery

Sold individually and priced per latch. A minimum order of 11 latches applies, shown when you add to basket. Delivery charges and lead times are shown at checkout.