-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Need to keep vehicles off a driveway, forecourt or parking bay but open it up when you need to? This retractable security post does it without leaving a post lying around. It stands 500mm above ground when raised and drops fully into its own ground socket when lowered, with an integral lid closing over the top. In the raised position you turn the post 45° and padlock it to the lid, so nobody can lower it without the key. It suits home owners, facilities managers and forecourt operators alike. Choose galvanised, black or yellow, in 60mm, 76mm or 90mm diameter.
Why it works
Nothing to carry, nothing to store
A removable post has to be lifted out and put somewhere, and a fold-down post lies across the surface when it is down. This post goes straight down into the ground. Once lowered, the lid closes over it and only the collar shows, set no more than 10mm above the finished surface.
Light to lift, heavy to remove
The whole unit weighs 13–15kg depending on diameter, but you only lift 3–5kg when raising or lowering it. A grab handle on top gives you something to hold. The socket is set 760mm deep in concrete, and the raised post padlocks to the lid.
Simple external locking
The lock is a padlock you fit yourself on the outside. Rotate the raised post 45° and the padlock fits between the post and the lid. A recommended shackle size is not published, so check the fit or ask us. You can choose a padlock keyed alike with your gates or other posts. A padlock is not supplied.
- 500mm above ground when raised; fully below ground when lowered
- Integral lid covers the post when it is down
- Padlockable in the raised position (padlock not supplied)
- 3mm wall steel tube, galvanised or galvanised and powder coated
- British-made
Where it's used
Typical sites are domestic driveways, private bays at flats and new-build developments, car sales and garage forecourts, commercial unit frontages and staff car parks. At 500mm the post is about knee height, enough to stop a car pulling in while staying tidy on a house frontage. On a forecourt, a line of posts at no more than 1,200mm centres stops a vehicle driving between them.
Specifications
| Height above ground (raised) | 500mm |
|---|---|
| Socket depth below ground | 760mm |
| Post diameter | 60mm, 76mm or 90mm |
| Wall thickness | 3mm |
| Finish | Galvanised; or galvanised and powder coated Black RAL 9005 or Yellow RAL 1023 |
| Locking | External padlock between post and lid, raised position only (padlock not supplied) |
| Lift weight (post) | 60mm 3kg · 76mm 4kg · 90mm 5kg |
| Total weight | 60mm 13kg · 76mm 14kg · 90mm 15kg |
| Excavation required | Minimum 900mm deep x 300mm diameter |
| Lid height | 5–10mm above finished ground level (10mm maximum) |
| Maximum spacing | 1,200mm between posts |
| Guarantee | 12 months from the manufacturer, if installed and used correctly |
| Socket plan size / steel grade / impact rating | Not published for this line |
Choosing the right option
Finish. Galvanised is the hard-wearing, low-maintenance choice and blends in on concrete and tarmac. Yellow RAL 1023 is the most visible, which helps in car parks and on forecourts where drivers have to see the post when reversing. Black RAL 9005 looks neater on a house frontage or block paving. On the coloured versions the post is powder coated over galvanised steel. The socket, collar and lid stay galvanised on every finish.
Diameter. The 60mm post is the lightest to lift (3kg) and is enough for most domestic driveways. 76mm gives a heavier-looking post for shared car parks. 90mm is the most substantial and the most obvious to drivers, with a 5kg lift. Every size has the same 500mm height and 760mm socket.
Height and lock. Taller posts and built-in-lock versions are listed separately.
Installation, use and care
Dig a hole at least 900mm deep and 300mm in diameter. Put a layer of chippings or similar at the bottom so water can drain away from the socket. Set the socket upright and fill the top 300–400mm with concrete, with the lid finishing 5–10mm above the final surface. Let the concrete cure before use, keep the socket clear of debris and oil the padlock occasionally.
Frequently asked questions
Does it come with a padlock?
No. The post is padlockable but no padlock is supplied. You fit your own between the post and the lid after turning the raised post 45°.
Can I drive over it when it's lowered?
When it is lowered, the post sits fully below ground under its lid, and the collar sits 5–10mm above the surface. A load rating for the lid is not published for this line, so check with us before heavy vehicles use the spot regularly.
How far apart should I space several posts?
No more than 1,200mm apart.
Do I need drainage?
Yes. Put chippings or similar at the bottom of the 900mm hole so water drains away instead of collecting in the socket.
Ordering and delivery
Pick your finish and diameter above and order online. For multiple posts or a written quote, call us on 01744 520110 or email sales@industrialsuppliesco.co.uk. We'll confirm the lead time when you order. Prices include VAT.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




