Google Top Quality Store — Verified Exceptional Shopping Experience

Removable Stainless Steel Bollard 1000mm Above Ground, 60mm to 204mm Diameter, Lift-Out Post with Flush Ground Socket and Padlock Tab


Price:
Sale price£315.90
Inc. Vat

Express UK Delivery (2 Working Days)

Diameter: 60mm

In stock, ready to ship

Trusted by Industry Professionals

Description

When a driveway, forecourt or service entrance needs to be closed most of the time but opened now and then, a fixed post is the wrong answer and a gate is often overkill. This removable stainless steel bollard stands 1000mm above ground, sits in a ground socket set flush into concrete, and lifts out by hand when you need vehicle access. It is offered in ten tube diameters from 60mm to 204mm, so you can match it to existing fixed bollards on the same site or scale it up to suit a busy commercial frontage. It suits facilities managers, groundworkers, landlords and homeowners who want a clean, low-maintenance finish that looks right next to glazing and modern paving.

Why it works

Stainless tube that keeps its looks

The post is a plain round stainless steel tube with a 2mm wall. There is no paint or powder coat to chip as it goes in and out of the socket, and the brushed finish suits offices, retail units and housing where a yellow post would look out of place. The stainless grade is not published, so ask us before specifying for coastal or chemical environments.

A socket that leaves a flat surface

The ground socket is concreted in level with the finished surface. With the post out and the lid closed, people and vehicles cross a flush plate rather than a trip hazard.

Simple tab and padlock locking

The post is secured by a tab and padlock at the socket, with no springs or hydraulics to service. The padlock is not included, so you can key it alike with other site locks.

Lift weights a person can manage

Lift weights run from 4kg (60mm) to 14kg (204mm), so you can judge who on site can remove it.

  • 1000mm above ground on every size
  • Ten diameters, 60mm to 204mm, 2mm wall
  • Flush ground socket: 220mm deep (60–89mm) or 300mm deep (101–204mm)
  • Tab and padlock locking, padlock not included

Where it's used

Typical installations include vehicle forecourts, commercial premises, car park entrances, loading bay approaches and private driveways. It works well alongside fixed bollards of the same diameter, with one or two removable posts in a line of fixed ones so that an emergency or delivery route can be opened without leaving the frontage unprotected the rest of the time.

Specifications

Attribute Value
Height above ground 1000mm
Tube diameters 60, 76, 89, 101, 114, 129, 139, 154, 168, 204mm
Material Stainless steel
Stainless grade Not published for this line
Wall thickness 2mm
Fixing Removable post in a concrete-in ground socket
Socket depth below ground 220mm (60–89mm posts); 300mm (101–204mm posts)
Socket plan size Not published for this line
Locking Tab and padlock (padlock not included)
Lift weight (post) 60mm 4kg · 76mm 5kg · 89mm 6kg · 101mm 7kg · 114mm 8kg · 129mm 9kg · 139mm 9kg · 154mm 10kg · 168mm 11kg · 204mm 14kg
Weight (datasheet figure) 60mm 8kg · 76mm 9kg · 89mm 10kg · 101mm 15kg · 114mm 16kg · 129mm 17kg · 139mm 17kg · 154mm 23kg · 168mm 24kg · 204mm 27kg
Crash or impact rating Not published for this line
Manufacturer guarantee 12 months, if installed and used correctly

Choosing the right option

The only choice is tube diameter; the height, finish and locking are the same across the range. As a rule of thumb, 60mm to 89mm posts are a visual and casual deterrent for driveways and pedestrian routes, and they use the shallower 220mm socket, which means less digging. From 101mm upwards the socket deepens to 300mm and the post carries more steel, which suits commercial forecourts and car park entrances where vans and cars manoeuvre close by. If you are adding a removable post to a line of existing fixed bollards, match the diameter so the run looks uniform. Check the lift weight in the table too: if the post will be moved daily by different staff, a 101mm to 139mm post (7–9kg) is usually a sensible balance between presence and handling. No crash rating is published, so do not specify this post where a tested hostile-vehicle rating is required.

Installation, use & care

The socket needs a suitably excavated hole and is set in concrete with its top flush with the finished surface. Excavation size is not published, so allow for the socket depth plus a concrete surround and check for buried services before digging. Keep the socket clear of grit and leaves so the post drops in cleanly, and wipe the tube down periodically with warm soapy water to keep the brushed finish bright. Store the post somewhere dry and secure when it is removed.

Frequently asked questions

Is a padlock supplied?

No. The price excludes the padlock. The post is secured with a tab and padlock arrangement, so you can fit your own padlock, which also lets you key it alike with other locks on site.

How deep do I need to dig?

The socket itself is 220mm deep for the 60–89mm posts and 300mm deep for the 101–204mm posts. Your hole needs to be deeper and wider than the socket to allow for concrete; exact excavation sizes are not published.

Can I drive over the socket when the post is out?

The socket sits flush with the surface once installed, so vehicles and pedestrians cross a level plate with the lid closed. A load rating for the socket lid is not published, so avoid heavy plant parking on it.

Which stainless grade is it?

The grade is not published for this line. If grade matters for your specification, call us before ordering and we will confirm what we can.

Ordering & delivery

Choose your diameter and add to basket; prices include VAT. Each bollard is supplied with its ground socket. For multiple posts, matched fixed bollards or a delivery date for a site programme, call 01744 520110 or email sales@industrialsuppliesco.co.uk and we will confirm lead time and carriage.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Removable Stainless Steel Bollard 1000mm Above Ground, 60mm to 204mm Diameter, Lift-Out Post with Flush Ground Socket and Padlock Tab

60mm

£315.90 Inc. Vat

You may also like

Recently viewed