-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need to keep vehicles off a forecourt, driveway or service yard most of the time but still open the gap now and then, a removable security bollard is the simplest answer. This 1000mm post drops into a square ground socket set in concrete and locks in place with a tab and padlock. When a delivery lorry, fire tender or contractor needs through, you unlock it, lift it out and the way is clear. Choose plain galvanised for a discreet steel finish or yellow for high visibility, in ten diameters from 60mm to 193mm. Each bollard is supplied with its own ground socket, and the line is made in Britain.
Why it works
A deep socket, not a surface fixing
The ground socket is set into an excavated hole and concreted in, with welded fixing spikes to anchor it firmly. On 60mm to 90mm bollards the socket goes 220mm below ground; on 101mm and above it goes 300mm. Because the post sits inside a buried sleeve rather than on surface bolts, there is nothing at ground level for a vehicle to shear off or for a thief to undo.
Tube wall matched to the size
Smaller diameters use 3mm wall tube; the 139mm, 168mm and 193mm sizes step up to 5mm. That heavier wall is why the 139mm post weighs more than the 152mm one.
Simple tab and padlock locking
A tab on the bollard lines up with the socket and takes a padlock of your choice. The padlock is not included, which lets you key it alike with the locks you already use on site.
Where it's used
Typical sites include vehicle forecourts, commercial premises, car parks and domestic driveways, where the bollard stops unauthorised parking, protects vehicles and deters ram-raids. The yellow finish suits pedestrian precincts, pavements, play areas and traffic calming schemes where high visibility matters. Many installers fit one removable post in a line of fixed bollards so the perimeter can still be opened for occasional access.
Specifications
| Attribute | Value |
|---|---|
| Height above ground | 1000mm |
| Diameters | 60, 76, 90, 101, 114, 127, 139, 152, 168, 193mm |
| Wall thickness | 3mm (60-127mm and 152mm); 5mm (139, 168, 193mm) |
| Socket depth below ground | 220mm (60-90mm); 300mm (101-193mm) |
| Ground socket | Square socket with welded fixing spikes, set in concrete; hinged plate on the socket collar |
| Locking | Tab and padlock (padlock not included) |
| Finish | Galvanised plain, or galvanised with yellow finish |
| Lift weight / weight (kg) | 60mm 6/10 · 76mm 7/11 · 90mm 8/13 · 101mm 10/18 · 114mm 11/19 · 127mm 12/20 · 139mm 22/30 · 152mm 14/22 · 168mm 26/39 · 193mm 31/44 |
| Crash or impact rating | Not published for this line |
| Guarantee | 12 months from the manufacturer, if installed and used correctly |
| Country of manufacture | United Kingdom |
Choosing the right option
Finish. Galvanised plain blends into car parks and commercial frontages and shows less wear over time. Yellow is the better choice wherever people walk near traffic or where the post has to be seen in poor light, because a dull grey post in a dark yard is easy to reverse into.
Diameter. 60mm to 90mm posts mark out a driveway or parking bay and are the easiest to lift (6-8kg lift weight). 101mm to 127mm is the usual choice for business forecourts and service yards. For ram-raid deterrence or anywhere vans and lorries manoeuvre, go to 139mm or above, where the 5mm wall gives a heavier, stiffer post. Bear in mind the 168mm and 193mm posts weigh 26kg and 31kg to lift, so on a site where one person opens the gap daily, a smaller size or a telescopic bollard may suit better.
Installation, use & care
Excavate a hole deep enough for the socket (220mm or 300mm below finished ground, plus a concrete bed), set the socket level with the collar flush to the surface and concrete it in. Let the concrete cure fully before loading. To remove the bollard, unlock the padlock, lift the post out and store it safely. Keep the socket clear of grit and check the padlock from time to time. Removable bollards are designed for occasional rather than daily removal.
FAQ
Is the ground socket included?
Yes. Each bollard comes with its square ground socket with welded fixing spikes. Call us if you need a spare socket.
Is a padlock supplied?
No, the padlock is not included. The tab takes a standard padlock, so you can use one keyed alike with your existing site locks.
Can I bolt it down instead of concreting it in?
This version is designed for a socket concreted into an excavated hole. A bolt-down option is not listed for this product, so it is not suitable where you cannot dig.
Is it crash rated?
No impact or crash rating is published for this line. It is a security and access-control bollard, not a certified hostile vehicle mitigation product.
Ordering & delivery
Choose the finish and diameter above and add to basket; prices include VAT. For quantities, matching fixed bollards, a quote or delivery to site, call 01744 520110 or email sales@industrialsuppliesco.co.uk and our team will help you choose the right size.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



