-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need to close a space or an entrance at some times and open it at others, a fixed bollard is the wrong tool. This removable parking post stands 900mm above ground in a square galvanised socket that is concreted just 220mm into the ground. Lock it in place at night, lift it out in the morning and the lane is clear again. It suits petrol forecourts, business car parks, reserved bays and private driveways, and it comes in 60mm, 76mm or 90mm tube with a galvanised, black or yellow finish.
Why it works
A shallow socket instead of a deep excavation
Retractable posts need a deep pit and drainage. This post drops into a socket only 220mm deep, so you can fit it where services, rebar or a thin slab rule out deeper digging. The socket has a square collar that sits at ground level, and a base plate that locks it into the concrete.
Light enough to handle every day
The manufacturer gives a lift weight of 6kg for the post and 10kg for the complete unit. One person can lift it out and carry it away.
Locked at the base, where it is hard to attack
A hinged flap on the socket collar stands up beside the post, and a lug welded to the post passes through it. Your padlock goes through the lug, so the post cannot be lifted out without the key. On the galvanised 76mm post you can choose a hardened sliding lock instead. It is a sliding-bar type that sits under the flap and is supplied with keys.
Galvanised steel throughout
The tube is steel with a 3mm wall and a top cap. On the black and yellow versions a coloured coat goes over the galvanised post, and the socket stays bare galvanised.
- 900mm above ground, 220mm socket depth
- 60, 76 or 90mm diameter, 3mm wall
- Galvanised, galvanised and black, or galvanised and yellow
- Padlock-ready lug, or a hardened sliding lock (76mm galvanised)
Where it's used
Petrol station forecourts use these posts to close entry and exit lanes out of hours. Business car parks use them to keep a director's or visitor's bay clear. Housing associations and homeowners use them to stop strangers parking on a driveway. Because the post lifts out completely, it leaves no trip or tyre hazard when the space is in use.
Specifications
| Height above ground | 900mm |
|---|---|
| Socket depth below ground | 220mm |
| Tube diameter | 60mm, 76mm or 90mm |
| Wall thickness | 3mm |
| Material | Galvanised steel |
| Finish | Galvanised; galvanised and black (RAL 9005); galvanised and yellow (RAL 1023) |
| Fixing | Removable post in a ground socket concreted into the ground |
| Locking | Lug for your own padlock (no lock supplied), or a hardened sliding lock with keys (galvanised 76mm only) |
| Lift weight (post) | 6kg |
| Total weight | 10kg |
| Socket plan dimensions | Not published for this line |
| Guarantee | 12 months from the manufacturer, if installed and used correctly |
Choosing the right option
Diameter: 60mm is a light marker for driveways and single bays. 76mm is the usual choice for car parks and forecourts. 90mm gives the most visible and substantial post. The height, socket depth and weights are the same for all three sizes.
Finish: plain galvanised is the hardest-wearing and suits most commercial sites. Yellow (RAL 1023) is easiest to see in a busy yard or forecourt, especially in poor light. Black (RAL 9005) blends in on residential driveways and smarter frontages. On coated posts the socket stays galvanised.
Lock: the standard post is supplied without a lock, so you can fit your own padlock and key it alike with your other site locks. If you want a lock that sits neatly under the flap for extra security, choose the hardened sliding lock. It is only available on the galvanised 76mm post.
Installation, use and care
Dig a hole large enough to surround the socket and its base plate with concrete. Set the socket so its collar finishes flush with the surrounding surface, then check it is level and plumb before the concrete goes off. Let it cure fully before you stand the post in it. In daily use, lift the post out and store it somewhere secure. Keep the socket clear of grit and leaves, and put a drop of oil on the hinge and lock now and then.
FAQs
Is a padlock included?
No, not with the standard post. The lug takes a padlock of your choice. The galvanised 76mm post can be ordered with a hardened sliding lock and keys instead.
How deep do I need to dig?
The socket goes 220mm below ground. Allow extra depth and width so concrete surrounds the socket and its base plate.
Can I store the post in a second socket?
Yes. Additional ground sockets are made for storing the post somewhere convenient when it is not in use.
Will it stop a vehicle being driven at it?
No. It is an access-control and parking post, not an impact-rated security bollard. It deters and marks, but it is not designed to stop a deliberate ram.
Ordering and delivery
Choose the finish, lock and diameter above, and the price shown includes VAT. Each order is a single post with its ground socket. For several posts, key-alike padlocks, extra sockets or a delivery date, call us on 01744 520110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.







