-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A 316 stainless bar holder that fixes 12mm solid round infill bar to a flat post. The round satin body screws flat to the face of a flat bar or box section post with one M6 countersunk screw, and the bar passes straight through a 12.2mm cross hole, centred 20.5mm off the post. Two M5 grub screws lock the body to its base and the bar in place, so a run of horizontal bars stays straight and rattle-free. Satin 316 suits outdoor, coastal and pool-side balustrades. The price shown is for one bar holder, minimum order 5.

What you get
| Sold as | One bar holder, minimum order 5 |
|---|---|
| In each holder | Base with a 12mm boss, round body with a 12.2mm cross hole, two M5 grub screws fitted |
| Not included | The M6 fixing screw, the post and the 12mm bar |
Why choose this bar holder
Made for flat posts. The back is flat, so it sits tight to flat bar and box section posts with no gap. For round posts use a holder with a curved back, listed below.
Neat, hidden fixing. The base screws to the post first, then the body slides over it and is locked with a grub screw, so no screw head shows on the finished rail.
Bar runs straight through. The 12.2mm cross hole lets 12mm solid bar pass through intermediate posts in one length, with a grub screw to stop it sliding or turning.
Specifications
| Material | 316 stainless steel, satin finish |
|---|---|
| Fits | Flat posts, 12mm solid round bar |
| Body | 22mm across, 26mm long |
| Base | 4.1mm thick with a 12mm boss 7.5mm long |
| Bar hole | 12.2mm, centred 20.5mm from the post face |
| Fixing | 6.5mm hole for one M6 countersunk screw |
| Grub screws | Two M5 |
| Weight | About 0.05 kg |
Is this the right bar holder?
| Your post | Choose |
|---|---|
| Flat bar or box post, 316 | This bar holder |
| 48.3mm round post, 316 | 316 bar holder for 48.3mm tube |
| 42.4mm round post, 316 | 316 bar holder for 42.4mm tube |
| 42.4mm round post, indoors | 304 bar holder for 42.4mm tube |
| Two bars crossing | 316 cross bar holder for 12mm bar |
Fitting
Mark the bar heights on each post and drill, or drill and tap, for the M6 fixing at each mark. Screw the base to the post with an M6 countersunk screw. Slide the body over the base and lock it with the rear grub screw, lining the cross holes up along the run. Thread the 12mm bar through, then tighten the front grub screw onto the bar.
Care
Outdoors, rinse with fresh water and wipe along the grain every few weeks, more often near the sea or a pool, so salt and chlorine do not leave brown tea staining. Use warm soapy water; avoid chlorine bleach, wire wool and scouring pads.
Frequently asked questions
Is the price for one bar holder?
Yes, one bar holder with its base and grub screws. The minimum order is 5.
Will it fit a round post?
No, the back is flat. Use the 316 bar holder for 48.3mm or 42.4mm tube, which have a curved back.
What size bar does it take?
12mm solid round bar, through a 12.2mm hole.
Is the fixing screw included?
No. The base takes one M6 countersunk screw, chosen to suit your post. The two M5 grub screws are fitted.
Ordering and delivery
Order online in any quantity from 5, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full balustrade with posts, bar and holders, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 5 pcs







