Google Top Quality Store — Verified Exceptional Shopping Experience

Rubber D Fender Strip - Hollow D Buffer for Loading Dock, Wall & Kerb Impact Protection, 100 x 85 x 2500mm


Price:
Sale price£183.90
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

This rubber D fender strip puts a thick, springy buffer along any edge that vehicles, forklifts or pallet trucks keep hitting: the face of a loading dock, the foot of a warehouse wall, a wash bay wall or the end of a racking run. Each piece is a 2.5 metre length of solid black rubber with a flat base, a broad rounded crown and a hollow core running end to end. It measures 100mm wide by 85mm high and weighs about 20kg, which makes it a lower-profile option than tall dock fenders while still giving a deep, forgiving cushion. It suits warehouse and logistics managers, facilities teams and fit-out contractors who want a strip they can fix once and rely on.

Why it works

A hollow core that absorbs the blow

Solid rubber passes much of an impact straight through to the wall behind it. The hollow D-section gives the energy somewhere to go: when a pallet, forklift mast or trailer corner strikes the crown, the 24mm top wall and the 18mm side walls flex into the 43mm-high core and then recover their shape. The wall, dock edge or column behind the strip takes far less of the knock.

A wide, flat base that stays put

The base is a flat 93mm across and 18mm thick, so the strip sits square against a wall or dock face without rocking. The body swells slightly to 100mm at its widest, which keeps the sides of the profile clear of the fixing surface and lets the crown roll back under a glancing blow.

Tough SBR rubber

The profile is extruded from SBR rubber, a hard-wearing general-purpose compound widely used for industrial buffers and fenders. It takes scuffs from tyres, forks and pallet edges, will not crack or splinter the way plastic guards can, and keeps protecting after repeated contact.

  • Hollow D-shaped core with thick walls all round
  • Flat 93mm base for square fixing to concrete, block or steel
  • Low 85mm profile with a smooth rounded crown
  • 2.5 metre lengths that butt together for continuous runs

Where it's used

Common sites include the front face of raised loading docks below the dock edge, the base of block walls beside forklift aisles and goods-in doors, racking end frames and column bases, vehicle wash bay and workshop walls, and yard or quay walls where vans and lorries manoeuvre close to the building. Its lower height also suits kerb edges, low walls and the sides of loading ramps where a taller fender would stand too proud.

Specifications

Width 100mm overall, 93mm at the base
Height 85mm
Length 2500mm (one length per unit)
Weight Approx. 20kg per length
Material SBR rubber, black
Profile Hollow D-section, flat base, rounded crown
Hollow core height 43mm
Wall thickness 18mm sides, 18mm base, 24mm crown
Hardness and temperature range Not published for this line
Fixings Not included, strip only

Dimensions are typical. Extruded rubber varies by a few millimetres from batch to batch, so if an exact size matters for your job, call us before ordering and we will measure current stock for you.

Technical drawing of the 100 x 85 x 2500mm rubber D fender strip with cross-section dimensions

Choosing the right option

Measure the run you want to protect and divide by 2.5 to find the number of lengths, rounding up. One length covers a typical dock door opening; a 10 metre aisle wall needs four. Pieces butt end to end for an unbroken run and can be trimmed on site at doorways and corners.

Pick this lower 85mm profile where the strip must sit neatly along a wall base, kerb or ramp edge, or where you want a long run at a modest weight. For docks where trailers strike hard at a fixed height, pair it with moulded dock bumpers either side of the door and use the strip along the rest of the dock face.

Installation, use and care

Fix the flat base against sound concrete, blockwork or steel with anchor bolts suited to the surface, using large washers or a flat bar inside the core to spread the clamping load. A neat method is to drill an access hole through the crown above each fixing point so a socket can reach the bolt head. Place fixings evenly along the length and within about 150mm of each end. Cut with a fine-toothed saw or a long sharp blade wetted with soapy water. On busy runs, check the fixings every few months and clean the rubber with water and a mild detergent.

FAQ

Is the price for one length?
Yes. The price is for a single 2.5 metre length weighing about 20kg. Add as many lengths as your run needs.

Are fixings included?
No, the strip is supplied on its own. Choose anchors to suit your substrate, because concrete, blockwork and steel each need different fixings.

Can it be cut to length?
Yes. It cuts cleanly with a fine-toothed saw or sharp knife, so you can trim it on site to fit doorways, corners and the end of a run.

Will it stop a vehicle?
No. It cushions knocks and scrapes from vehicles, forklifts and pallet trucks, but it is not a vehicle restraint. Use wheel stops, kerbs or barriers where a vehicle must be physically halted.

Ordering and delivery

Order online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. Each length weighs around 20kg and is 2.5 metres long, so plan for two people when unloading several lengths. For bulk quantities or a size check against current stock, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Rubber D Fender Strip - Hollow D Buffer for Loading Dock, Wall & Kerb Impact Protection, 100 x 85 x 2500mm

£183.90 Inc. Vat

You may also like

Recently viewed