-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
When forklifts, pallet trucks or reversing lorries keep catching the same dock edge, wall base or column, this rubber D fender strip gives that edge a thick, forgiving buffer. It is a hollow D-section in a high polymer content rubber compound, which has better physical properties than the standard natural and SBR blend used for most rubber extrusions. Each piece is a 1 metre length with a flat base, a rounded crown and a D-shaped core running end to end. It measures 95mm wide by 100mm high, weighs about 10.5kg, and suits warehouse managers, facilities teams and site contractors who want a tougher strip for short runs, doorways and high-wear spots.
Why it works
The hollow core takes the knock
A solid block passes much of an impact straight into whatever it is fixed to. The hollow D-section gives the blow somewhere to go: when a vehicle or pallet strikes the rounded crown, the 28mm top wall and the 20mm side walls flex into the 60mm wide core, then spring back. Your wall, dock face or racking sees a softer, slower load.
A higher grade of rubber
The compound carries a higher percentage of polymer than standard extrusion rubber, which gives it better physical properties. In practice that means a strip better suited to the spots that get hit most often: the corner of a dock door, the end of a racking run or the wall beside a busy goods-in door.
A flat base that sits square
The 24mm base is flat across the full 95mm width, so the strip sits square against a wall or dock face without rocking. The wide contact area spreads each knock over more of the surface behind it.
- Thick walls all round a hollow D-shaped core
- High polymer content rubber compound
- Flat base for square fixing to walls and dock faces
- Rounded crown that deflects glancing blows
- 1 metre lengths, easy to handle and to butt together
Where it's used
Typical installations include the face of raised loading docks either side of the leveller, the base of block walls along forklift aisles, the ends of pallet racking runs, columns in goods-in areas, vehicle wash bay walls and workshop door reveals. The 1 metre length is handy for doorways, short wall sections and repairs, where a longer strip would need cutting down.
Specifications
| Width | 95mm |
| Height | 100mm |
| Length | 1000mm (one length per unit) |
| Weight | Approx. 10.5kg per length |
| Material | High polymer content rubber compound, black |
| Profile | Hollow D-section, flat base, rounded crown |
| Hollow core | 60mm wide x 47mm high |
| Wall thickness | 20mm sides, 24mm base, 28mm crown |
| Hardness and temperature range | Not published for this line |
| Fixings | Not included, extrusion only |
Dimensions are typical. Extruded rubber varies slightly from batch to batch, so if an exact size matters for your job, call us before ordering and we will measure current stock.

Choosing the right option
Measure the edge you need to protect and order one length per metre, rounding up. Choose this high polymer strip for the points that take the hardest, most frequent knocks. For long runs of wall or dock face, our 2 metre rubber D fender strip covers more ground per length, and many sites use both: the tougher compound at door edges and corners, the longer strip along the rest of the wall.
Where a trailer strikes a dock at fixed points, a moulded dock bumper either side of the door gives more concentrated protection than a strip, with this fender running along the dock face between them.
Installation, use and care
Fix the flat base against sound concrete or masonry with anchor bolts sized for your wall, using large washers or a flat bar inside the core to spread the clamping load. A common method is to drill an access hole through the crown above each fixing so a socket can reach the bolt. Space fixings evenly and close to each end. To cut a length, use a fine-toothed saw or a long sharp blade wetted with water. Check fixings now and then on busy runs and wipe the rubber clean with water and mild detergent.
FAQ
Is the price for one length?
Yes. The price is for one 1 metre length weighing about 10.5kg. Add the number of lengths you need to your basket.
What is different about the high polymer compound?
It has a higher percentage of polymer in the rubber than standard extrusions, which gives it better physical properties for heavy, repeated contact.
Are fixings supplied?
No, the strip is supplied on its own. Choose anchors to suit your wall, as concrete, blockwork and steel each need different fixings.
Will it stop a lorry?
No. It cushions knocks and scrapes from vehicles, forklifts and pallet trucks. It is not a vehicle restraint, so use wheel stops, kerbs or barriers where a vehicle must be physically halted.
Ordering and delivery
Order online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For larger quantities or a size check against current stock, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



