Google Top Quality Store — Verified Exceptional Shopping Experience

Heavy Duty Rubber D Fender Strip - Hollow D Dock Buffer for Loading Bays, Quays & Walls, 210 x 145 x 2000mm


Price:
Sale price£738.16
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

Where trailers back onto a dock, lorries manoeuvre past a wash bay wall or forklifts work along a busy goods-in area, a light rubber strip soon gets chewed away. This heavy duty rubber D fender is the big brother of our standard profiles: a 2 metre length of black rubber 210mm wide and 145mm high, with walls up to 50mm thick around a hollow D-shaped core. It is built for site managers, dock contractors and facilities teams who need a continuous buffer that can take hard, repeated contact from heavy vehicles. Each length weighs about 73kg and is sold individually, so you can protect a single dock face or butt lengths together along a whole run of bays.

Why it works

Thick walls around a hollow core

The section is far more substantial than a typical wall strip. The side walls are 50mm thick, the base 37mm and the crown 35mm, wrapped around a hollow core about 110mm wide and 73mm high. When a trailer or vehicle presses on the rounded crown, the rubber compresses into that core and then recovers, absorbing energy that would otherwise go straight into your concrete or steelwork.

A broad, flat base

The full 210mm width sits flat against the dock or wall, so the fender beds down square and spreads each impact over a large area of the surface behind it. That wide footprint also gives plenty of room for fixings either side of the core.

Natural and SBR rubber

The profile is extruded from a natural rubber and SBR compound, a tough, resilient mix widely used for marine and dock fendering. It does not crack like plastic, resists scuffing from tyres and keeps its shape after repeated knocks.

  • Heavy hollow D-section, 210 x 145mm
  • Walls up to 50mm thick for hard, repeated contact
  • Flat 210mm base for square, stable fixing
  • 2 metre lengths that butt together for long runs

Where it's used

Typical installations include the faces of raised loading docks where trailers reverse in, the walls of lorry wash bays and vehicle workshops, yard walls and gate piers on tight HGV routes, and the edges of goods-in areas where vehicles and plant pass close to the building. Its size also suits small quays, slipways and pontoon edges where work boats come alongside. For lighter knocks from pallet trucks and forklifts along aisles, our smaller hollow D fender strip is usually enough.

Specifications

Width 210mm
Height 145mm
Length 2000mm (one length per unit)
Weight Approx. 73kg per length
Material Natural / SBR rubber, black
Profile Hollow D-section, flat base, rounded crown
Hollow core Approx. 110mm wide x 73mm high
Wall thickness 50mm sides, 37mm base, 35mm crown
Hardness and temperature range Not published for this line
Fixings Not included, fender only

Dimensions are typical. Extruded rubber varies slightly from batch to batch, so if an exact size matters for your job, call us before ordering and we will check the current stock.

Technical drawing of the 210 x 145 x 2000mm heavy duty rubber D fender with cross-section dimensions

Choosing the right option

Measure the length of edge you want to protect and divide by two to find how many lengths you need, rounding up. A single dock face usually takes one or two lengths; a long wash bay or yard wall needs one length for every 2 metres. Lengths can be butted end to end for a continuous run or trimmed on site at doorways and corners.

Pick this heavy profile where full-size vehicles make contact. Where trailers strike a dock at fixed points, moulded dock bumpers either side of the door give concentrated protection, and many sites fit both: bumpers at the door and this fender along the rest of the dock face.

Installation, use and care

Fix the flat base to sound concrete or masonry with anchor bolts sized for your substrate, using large washers or a flat bar inside the core to spread the clamping load. A common method is to drill an access hole through the crown above each fixing so a socket can reach the bolt head. Space fixings evenly and place one close to each end. Because each length is about 73kg, plan for two people or a lifting aid when positioning it. To shorten a length, cut with a fine-toothed saw or a long sharp blade kept wet. Check fixings periodically on busy docks and clean the rubber with water and mild detergent.

FAQ

Is the price for one length?
Yes. The price is for one 2 metre length weighing about 73kg. Add the number of lengths you need to your basket.

Are fixings supplied?
No, the fender is supplied on its own. Choose anchors to suit your dock, wall or quay, as fixing needs differ between concrete, blockwork and steel.

Can I cut it to length?
Yes. It can be cut on site with a fine-toothed saw or a wetted blade, though the thick walls take a little time to get through.

Will it stop a lorry?
No. It cushions contact and protects the surface behind it, but it is not a vehicle restraint. Use wheel stops, kerbs or barriers where a vehicle must be physically halted.

Ordering and delivery

Order online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. This is a heavy item, so please make sure someone is available to help unload. For larger quantities, a stock check or a lead time on multiple lengths, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Heavy Duty Rubber D Fender Strip - Hollow D Dock Buffer for Loading Bays, Quays & Walls, 210 x 145 x 2000mm

£738.16 Inc. Vat

You may also like

Recently viewed