-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A studded Gothic quatrefoil that sits in the middle of a bar, to add a band of decoration across a gate or railing. This panel is cast steel, 163mm tall and 100mm wide, with a four-lobed frame studded with raised beads on both faces, a large quatrefoil opening 70mm wide, a beaded collar 36mm across at each end and a 12mm stub top and bottom. You weld it in line between two lengths of 12mm bar. The price shown is for one panel, with a minimum order of 5.

Why choose this panel
A band of Gothic detail. A row of these panels set at the same height across a gate or railing creates a decorative frieze, the way Victorian and Gothic Revival gates were made. The open quatrefoils let light and views through.
Studded on both faces. The raised beads run all round the frame on both sides, so the gate looks finished from the street and from inside.
Made to go in a bar. A 12mm stub at each end lines up with 12mm bar above and below, and the beaded collars hide the joints.
Raw steel, ready for your finish. At about 0.47 kg each it comes as bare cast steel, so weld first, then prime and paint, or galvanise and powder coat.
Where it is used
Garden and driveway gates, railing panels, church and churchyard gates, balustrades and screens, and restoration of Victorian and Gothic Revival ironwork.
Specifications
| What you get | One panel, minimum order 5 |
|---|---|
| Style | Studded Gothic quatrefoil, in-line |
| Material | Cast mild steel |
| Finish | Raw, unpainted |
| Height | 163mm overall |
| Width | 100mm |
| Opening | Quatrefoil, 70mm wide |
| Collars | Beaded, 36mm across, top and bottom |
| Stubs | 12mm, 7mm long, top and bottom |
| Weight | About 0.47 kg each |
| Fixing | Weld in line between two lengths of bar |
Which bar does it suit?
| Bar on your gate | How the 12mm stubs sit |
|---|---|
| 12mm square or round | Flush with the bar above and below, the best match |
| 16mm square or round | Stubs sit 2mm inside the bar edge, the 36mm collars cover the joint |
| 10mm square | Stubs overhang 1mm each side, dress the weld back |
| 20mm bar or larger | Panel looks light, weld to a flat bar frame instead |
How many do you need?
| Job | Panels |
|---|---|
| 1 metre gate, a panel in every bar at 120mm centres | 9 |
| 1 metre gate, a panel in every other bar | 5 |
| 2 metres of railing, every bar at 120mm centres | 17 |
| 2 metres of railing, every other bar | 9 |
The panel is 100mm wide, so in every bar allow at least 110mm centres; 120mm leaves a 20mm gap between panels. On stairs, landings and balconies in homes, no gap must let a 100mm sphere pass through, and the quatrefoil opening is 70mm wide.
Is this the right panel?
| You want | Choose |
|---|---|
| A studded quatrefoil set in a 12mm bar | This panel |
| A small pierced Gothic railhead to top the bars | 110 x 48mm pierced spear railhead |
| A Gothic cross railhead | 162 x 90mm cross arm spear railhead |
| A ball top railhead for 12mm bar | 138 x 60mm ball top scroll railhead |
| Every railhead and ornament | All railheads |
Fitting and care
Cut each bar at the height you want the panel, allowing 149mm between the two cut ends for the panel body. Square and grind the ends flat. Set the panels in a jig or along a straight edge so they sit level across the gate, tack each stub to its bar, check the line, then weld out and dress the joints under the collars.
Clean the welds with a flap disc, degrease, then prime with a zinc-rich or metal primer before painting, working it round the studs. Hot-dip galvanising before powder coating gives the longest life outdoors.
Frequently asked questions
Is the price for one panel?
Yes, it is for one panel, with a minimum order of 5. For a larger job, call us for a quantity price.
Is it a railhead?
No. It goes in the middle of a bar, not on top. Pair it with a railhead on the top of each bar.
Is it painted?
No. It is raw cast steel and will rust if left bare outdoors, so prime and paint it, or galvanise it, once it is welded in.
Is it the same on both sides?
Yes. The studs and frame are cast on both faces.
Ordering and delivery
Order 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 5 pcs





