Key Clamp End Post, Ready Made for 33.7mm Rail, 1100mm, No Mid Rail, Galvanised

The ready made end post finishes a single top rail barrier with a neat, closed end: bolt it down, fit the rail and the job is done. It is an oval base flange, a 33.7mm galvanised post and a 90° elbow on top, assembled at 1100mm overall height. The end of the top rail pushes into the elbow, which turns it down into the post, so there is no open tube end where people walk. There is no mid rail fitting, so it suits single-rail barriers and stand-off rails. Tube and fittings are galvanised for indoor and outdoor use. The price shown is for one complete post; rails and floor fixings are not included.

Why use a ready made end post

No cutting or assembly on site. The post arrives cut, fitted and set at height. Each post goes up in the time it takes to drill two holes and tighten two anchors.

A safe, finished end. The elbow closes off the end of the rail and turns it into the post, so the barrier ends with a smooth bend rather than a cut tube.

The same height as the run. Ready made end, mid and corner posts are all 1100mm overall, so the rail sits level from one end to the other without measuring each post.

Galvanised for outdoors. The zinc coating protects the tube and fittings in car parks, yards, walkways and loading areas.

Where it is used

Single-rail pedestrian barriers along walkways and footpaths, stand-off rails in front of shop windows and building walls, car park and yard edge rails, crowd and queue lines, and low guard rails round plant, meters and machinery.

Specifications

Building a single-rail barrier

How many do you need?

Two end posts for every separate run, one at each end. A run that ends against a wall needs only one end post; finish the other end with a wall flange. Space mid posts at up to 2 metre centres.

Choosing the right size

This post takes 33.7mm outside diameter rail, often sold as 1" or 25mm nominal bore. Measure the rail tube before ordering. The same ready made end post is made for 42.4mm and 48.3mm rail.

Fitting and care

Set out the run, stand the post in place and mark the two holes in the base. Drill and fix with anchors to suit the floor (not included). Fit the rail into the top fitting, level it and tighten all grub screws with a 1/4" hex key. Check the anchors and screws after the first week and once a year, and touch up scratched galvanising with zinc-rich paint.

Frequently asked questions

Ordering and delivery

Order online with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full barrier run, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.