Google Top Quality Store — Verified Exceptional Shopping Experience

316 Stainless Steel Handrail Bracket with M6 Stem and Cover Plate, 85mm Projection


Price:
Sale price£14.90
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

A 316 stainless handrail bracket with a plain upright stem, made for welded stainless rails or for a bolt-on support plate. The 12mm round bar arm comes 85mm off the wall and turns up into a 75mm stem with an M6 tapped hole in its top. Either weld the stem to the underside of a stainless tube rail, or screw a curved support plate onto it and fix the rail to that. The 70mm wall plate is screwed through three countersunk holes, then a smooth satin cover plate slides over it so no screws show. The price shown is for one bracket, minimum order 5.

Dimension drawing of the 316 handrail bracket with M6 stem and cover plate: 70mm wall plate with three countersunk holes on a 48.7mm circle, 12mm round bar, 85mm wall to stem centre, 75mm stem tapped M6 15mm deep, cover plate 73.3 x 12mm

What you get

Sold as One bracket, minimum order 5
In the box Bracket with 70mm wall plate, and its satin cover plate
Material 316 stainless steel, satin finish
Not included The rail, a support plate, and wall fixings

Why choose this bracket

Hidden fixings. The cover plate sits over the screwed wall plate, so the wall end is a plain satin disc with no screw heads on show.

Two ways to fix the rail. Weld the stem straight to a stainless tube for a seamless welded handrail, or bolt on a curved support plate for 42.4mm tube or a curved support plate for 48.3mm tube through the M6 thread and screw the rail to the plate.

316 for outdoors. 316 stainless contains molybdenum, which gives it much better resistance to salt and chlorine than 304, so it suits external ramps, steps and coastal sites.

Specifications

Material 316 stainless steel, satin finish
Wall plate 70mm across, 5mm thick, three countersunk holes on a 48.7mm circle
Arm 12mm round bar
Projection 85mm, wall to stem centre
Stem 75mm high, M6 tapped 15mm deep at the top
Cover plate 73.3mm across, 12mm deep, 12.4mm hole for the arm
Weight About 0.33 kg

Is this the right bracket?

Your job Choose
Welded stainless rail, or rail on a bolt-on plate This M6 stem bracket
42.4mm tube rail, screw fixed This bracket with a 42.4mm support plate
48.3mm tube rail, screw fixed This bracket with a 48.3mm support plate

Fitting

Mark the bracket positions along the line of the rail, no more than about 1m apart and close to each end. Slide the cover plate onto the arm, then fix the wall plate through its three countersunk holes with screws and plugs or anchors to suit the wall. Push the cover plate back over the wall plate. Then either weld the top of each stem to the underside of the tube rail and dress the welds, or screw a support plate onto each stem with an M6 countersunk screw and fix the rail to the plates.

Safety. Bracket spacing, wall fixings and rail height for a guarding or public handrail must suit the wall and the use, to Approved Document K and BS 6180 where they apply.

Care

Outdoors, rinse with fresh water and wipe along the grain every few weeks, more often near the sea or a pool, so salt and chlorine do not leave brown tea staining. Use warm soapy water; avoid chlorine bleach, wire wool and scouring pads.

Frequently asked questions

Is the price for one bracket?

Yes, one bracket with its cover plate. The minimum order is 5, enough for a run of about 4m.

Does it come with a saddle for the rail?

No. The stem has an M6 thread for a separate support plate, or it can be welded to the rail.

How far does the rail sit from the wall?

The stem centre is 85mm from the wall, so a rail sits on the stem with about 60mm clear to the wall, depending on the rail size.

Are wall fixings included?

No. Choose screws and plugs or anchors to suit your wall; the holes are countersunk.

Ordering and delivery

Order online in any quantity from 5, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail with tube, brackets and ends, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

316 Stainless Steel Handrail Bracket with M6 Stem and Cover Plate, 85mm Projection

£14.90 Inc. Vat

You may also like

Recently viewed