Google Top Quality Store — Verified Exceptional Shopping Experience

Cast Iron Fleur Scroll Panel 295 x 550mm - Bolt-On Gate & Wall Feature


Price:
Sale price£36.90
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

A large solid cast iron panel that turns a plain gate, railing or wall into a period feature. It is one casting, 550mm tall, 295mm wide and 18mm deep, with a fleur-de-lis finial at each end, heart-shaped scrolls above and below the centre, two curled loops out to each side, and a cast rosette framed by acanthus leaves in the middle. The design is the same either way up. Bolt it across the bars of a gate or railing, or fix it to a wall or timber gate. The price shown is for one panel.

Dimension drawing of the cast iron fleur scroll panel: 550mm tall, 295mm wide, a 70mm finial at each end and a 410mm scroll body

Why buyers choose it

Deep, crisp cast detail. At 18mm deep the rosette, leaves and fleur-de-lis stand well proud of the bars, so the panel reads clearly from the street. It weighs about 3.58 kg, a proper casting rather than pressed sheet.

No welding needed. The open scrolls give plenty of places to pass a bolt, U-bolt or screw, so it fits to an existing painted gate or a wall with basic tools.

Big enough to be the centrepiece. At 295 x 550mm it fills the middle of a pedestrian gate or a section of railing on its own, and looks just as good mounted on a garden wall.

It takes any paint. Prime it and finish it in black, a heritage colour, or pick out the rosette in gold.

Where it is used

Pedestrian and side gates, driveway gates in pairs, front garden railings, Juliet balconies, timber gates and fence panels, garden and courtyard walls, pub and shop frontages, and indoor walls and fireplace surrounds as a decorative feature.

Specifications

What you get One cast iron fleur scroll panel
Height 550mm, including the finials
Width 295mm at the side loops
Depth 18mm
Sections 70mm finial, 410mm scroll body, 70mm finial
Across the upper hearts 180mm
Design Fleur-de-lis finials, heart scrolls, side loops, cast rosette, acanthus leaves
Material Cast iron, one piece
Finish Bare cast iron, unpainted
Fixing Bolt-on, through the open scrolls
Weight About 3.58 kg

Will it fit my gate?

At 295mm wide the panel sits across three upright bars on most gates and railings with bars at about 100mm to 130mm centres. It needs a clear height of about 550mm between the rails, or it can sit over a rail. On a timber gate or a wall it can go anywhere.

Where it goes How to fix it
Steel gate or railing with round or square bars U-bolts or bolts with a clamp plate behind the bar, through the side loops
Timber gate or fence Exterior screws with washers through the scrolls
Brick, block or rendered wall Masonry screws and plugs through the scrolls

Choosing the right panel

This is our larger cast iron panel. For a slimmer gate or a forged steel design, compare:

See every design in our decorative panels range.

Fitting and care

Paint the panel before you fit it, so the back is protected too. Wire brush any loose surface rust, wipe it clean, apply a metal primer and two top coats. Hold the panel in place, mark the fixing points through the side loops and the scrolls near each end, and fit bolts or U-bolts with a clamp plate or large washer behind. Use at least four fixings for a panel of this weight. Tighten firmly but do not overtighten, as cast iron is hard but brittle and can crack under a sharp blow or uneven load. Cast iron is not made for welding to steel. Touch up chips each spring to keep rust out.

Frequently asked questions

Is the price for one panel?

Yes. The price is for one cast iron fleur scroll panel. For several panels or a larger job, call us for a price.

Can I weld it to my steel gate?

We do not recommend it. Cast iron needs special rods and preheating to weld and can crack. It is made to be bolted on through the open scrolls.

Is it painted?

No. It is supplied as bare cast iron so you can paint it to match your gate. Prime and paint it before it goes outside.

Is the back flat?

Yes. The back is flat, so it sits tight against gate bars, boards or a wall.

Can I use a pair on double gates?

Yes. Fit one in the centre of each leaf at the same height. The design is symmetrical, so both panels match.

Ordering and delivery

Order online with Express UK Delivery to your door and same-day dispatch on orders before 2pm, Monday to Friday. For a larger quantity or mixed parts, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Cast Iron Fleur Scroll Panel 295 x 550mm - Bolt-On Gate & Wall Feature

£36.90 Inc. Vat

You may also like

Recently viewed