Perforated PVC Strip Roll 50m | 200mm x 2mm Ventilated Strip Curtain PVC With Airflow Slots for Kitchens and Bakeries

A 50 metre roll of 200mm x 2mm perforated clear PVC strip for ventilated strip curtains on kitchen back doors, bakery loading doors and other openings that need to breathe. Each strip has rows of small slots punched down its centre, so heat, steam, fumes and odours can escape while the curtain still helps keep out flying insects, birds, leaves and blown debris. A standard strip curtain on a hot kitchen door can trap heat and condensation; a perforated one lets the room breathe while the door stays covered. Cut strips to your own drops for a new curtain or to replace worn perforated strips. The roll is priced in full inc VAT.

Why perforated PVC

Airflow with a barrier. The slots let warm air, steam and cooking fumes out through the curtain, so a back door can stay covered without the kitchen or bake room overheating.

Helps keep pests out. With the door open for ventilation, the strips still put a physical barrier across the opening against flies, wasps, birds and leaves.

Less condensation. Moisture is not trapped behind a sealed curtain, which helps keep doors, walls and floors drier.

Clear and easy to pass. The clear PVC keeps the view through the door, and staff and trolleys push straight through.

Know the limits. Because air passes through by design, perforated PVC is not for cold rooms, freezers or anywhere you need to hold temperature. Use standard clear or polar grade PVC there.

Where it is used

Commercial kitchen back doors, catering prep rooms, bakeries and bakery loading doors, food production areas with heat or steam, warehouses that need airflow between zones, light manufacturing, waste handling and recycling buildings.

Size and coverage

Strips needed = opening width divided by (strip width minus overlap), rounded up, plus one. With a 100mm overlap, one 50m roll cut at a 2.2m drop gives 22 strips, enough for a doorway about 2.3m wide.

A recommended maximum height is not published for this line; 200mm x 2mm strips generally suit doorways up to about 3m.

Which product do you need?

Specifications

Cutting and fitting

Unroll the PVC on a clean flat surface and let it relax. Cut each strip square across the strip with a sharp knife or heavy scissors against a straight edge, punch or drill the hanging holes in the plain area at the top to suit your plates or rail, and hang with a 100mm overlap. Fit inside the opening where possible to shelter it from weather. Wash with warm soapy water; a soft brush clears grease from the slots.

Frequently asked questions

Ordering and delivery

Add the roll to your basket and check out online with Express UK Delivery. For several rolls or trade quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.