-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
This ornamental bollard is a 900mm straight steel post with a rolled-rim cap and two raised collar rings. It gives a high street, conservation area or school frontage the traditional look of a Victorian street bollard, without the weight or price of a cast iron casting. It is 114mm mild steel tube with the cap and rings welded on, hot-dip galvanised, then left bare or powder coated in one of seven RAL colours. Every finish comes in three fixings: concrete in, bolt down or removable.
Why it works
Galvanised first, coloured second
The whole post is hot-dip galvanised, so the zinc coating protects the steel inside and out. On the coloured versions, the polyester powder coat goes on top of the galvanising, not instead of it. If a car door or a sweeper chips the paint, the zinc underneath stops rust creeping under the coating, so the post stays tidy far longer than painted bare steel.
A traditional profile in a simple steel post
The heritage look comes from three details: a rolled rim around the flat top, a ring about 160mm below the cap and a second ring about 330mm lower. The lower half stays plain. Because the details are welded onto a standard 114mm tube with a 3mm wall, the post weighs about 13kg. Two people can handle it, and it needs no lifting gear.
Three fixings, one look
All three fixings look the same above ground, so a run of concrete-in posts can include a removable post across a service access and still match.
- Hot-dip galvanised mild steel, with an optional RAL powder coat over the zinc
- Rolled-rim cap and two raised rings, welded on
- 900mm above ground, 114mm diameter
- Concrete in, bolt down or removable
Where it's used
Typical sites are market-town high streets, pedestrianised shopping streets, conservation-area terraces, town hall squares, school gates, park entrances, seafront promenades and the forecourts of converted mills. It keeps vehicles off footways and verges and marks the edge of a shared surface.
Specifications
| Height above ground | 900mm |
|---|---|
| Diameter | 114mm (114.3mm on drawing) |
| Wall thickness | 3mm |
| Material | Mild steel tube; cap and rings welded on |
| Design | Flat top with rolled-rim cap; two raised rings, about 160mm below the cap and a further 330mm apart |
| Finish | Hot-dip galvanised, or galvanised and powder coated: Jet Black RAL 9005, Colza Yellow RAL 1021, Traffic Red RAL 3020, Traffic Blue RAL 5017, Moss Green RAL 6005, Silver Grey RAL 7001, Pure White RAL 9010 |
| Concrete in | 300mm below ground, with welded fixing spikes |
| Bolt down | Base plate for fixing to a suitable concrete surface; plate size not published for this line; fixing bolts not included |
| Removable | Ground socket 300mm below ground, with welded fixing spikes; padlock not included |
| Weight | 13kg (concrete in and bolt down); removable 21kg in total, 13kg lift weight |
| Guarantee | Manufacturer's 12 months, if installed and used correctly |
| Impact rating | Not published for this line |
Choosing the right option
Fixing. Choose concrete in when you are laying or relaying paving. It is the most permanent fixing and leaves no plate at the base. Bolt down suits a sound existing concrete slab that you do not want to break out. Allow for the visible round base plate and buy anchors to suit your slab, because bolts are not included. Removable is for access points used by refuse, maintenance or emergency vehicles. The post lifts out of a galvanised socket set flush with the paving and is secured with your own padlock.
Colour. In conservation areas and on listed-building frontages, black (RAL 9005) or dark moss green (RAL 6005) is the usual choice, but check your local authority's streetscape guide or design code first. Many specify the colour. Plain galvanised suits contemporary or industrial-heritage schemes. Yellow, red, white and traffic blue give strong contrast on shared surfaces and school frontages, where partially sighted people need to see the bollard clearly. Silver grey is a quieter option against stone and brick.
Installation, use and care
For concrete-in and removable versions, excavate a suitable hole and set the post or socket in concrete with the spikes fully embedded. Check the post is plumb and at 900mm above finished level before the concrete goes off. Bolt-down posts go onto a level, sound concrete surface with anchors suited to that slab. Keep removable sockets clear of grit and leaves. Wash coloured posts occasionally and touch in any chips promptly.
FAQ
Is this cast iron?
No. It is galvanised mild steel with welded steel cap and rings, so it is lighter and cheaper than a casting. It will not meet a specification that requires cast iron.
Can I order a RAL colour that isn't listed?
The listing covers the seven most-specified colours. For another RAL shade, call or email us with the reference and the quantity you need, and we will confirm whether it can be supplied.
Are fixings and padlocks included?
No. Bolt-down anchors and the padlock for the removable version are not included. Concrete-in and removable versions come with welded fixing spikes.
Is it crash-rated?
No impact rating is published. This is a demarcation and anti-parking bollard, not a hostile-vehicle-mitigation product.
Ordering and delivery
Choose the fixing and finish above, and the price shown includes VAT. Powder-coated finishes are made to order, and we confirm the lead time when you order. For quantities, scheme pricing or delivery to site, call 01744 520110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

























