-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
When a high street, conservation area or school frontage needs vehicles kept off the footway without the place looking like a car park, this is the bollard specifiers reach for. It stands 900mm above ground, is made from 114mm galvanised mild steel tube and is finished with a smooth domed cap and three raised collar rings, a traditional profile that sits comfortably beside railings, cast lamp columns and stone kerbs. You choose the fixing (concrete in, bolt down or removable) and the finish: plain galvanised or one of seven RAL colours. Councils, contractors and landscape architects buy it singly for a gateway or by the dozen for a street scheme.
Why it works
Galvanised steel under the colour
The tube is mild steel with a 3mm wall, and the cap and rings are welded on before the whole bollard is galvanised. Every coloured version starts out galvanised and is then coated. If paint gets chipped by a trolley or a reversing van, there is still zinc underneath protecting the steel, so you are not looking at rust streaks after the first winter.
A period look from simple parts
The detail comes from a domed top and three plain bands: one directly under the cap, one a short way below it and one near the base. That reads as traditional street furniture from the pavement, with no fine ornament to snap off when something hits it.
One design, three fixings
The same post is made for concrete-in, bolt-down and removable installation. That means a scheme can keep one consistent look across fixed runs, surface-mounted spots above services, and access points that need opening now and then.
- 900mm above ground, Ø114mm, 3mm wall
- Welded dome cap and three raised rings
- Galvanised, or galvanised and colour coated
- Concrete in, bolt down or removable
Where it's used
Town-centre pedestrian zones, market squares and conservation-area streets where planners expect a traditional profile. School entrances, park gates, canal towpaths and seafront promenades. Retail precincts and civic squares, with removable posts at delivery and emergency access points.
Specifications
| Height above ground | 900mm |
|---|---|
| Diameter | 114mm |
| Wall thickness | 3mm |
| Material | Mild steel tube; cap and rings welded on |
| Top | Domed cap with three raised ring bands |
| Finish | Plain galvanised, or galvanised and coated: Jet Black RAL 9005, Colza Yellow RAL 1021, Traffic Red RAL 3020, Traffic Blue RAL 5017, Moss Green RAL 6005, Silver Grey RAL 7001, Pure White RAL 9010 |
| Concrete in | 300mm below ground, welded fixing spikes |
| Bolt down | Base plate for a suitable concrete surface; fixing bolts not included; plate size not published for this line |
| Removable | Lift-out post in a ground socket set 300mm below ground, welded fixing spikes on the socket, padlock point; padlock not included |
| Weight | Concrete in 13kg; bolt down 13kg; removable 21kg in total (13kg lift weight) |
Choosing the right option
Fixing. Concrete in is the most robust choice for new paving or full reinstatement, as the post sits 300mm into a concrete footing. Bolt down suits existing slabs, or places where services stop you digging, but it needs a sound concrete base for the anchors (bolts are not supplied). Removable is the choice for any point vehicles must pass through occasionally: you lift the post out of its socket, which takes a padlock you supply.
Finish. Plain galvanised is the low-maintenance option and weathers to a soft grey. In conservation areas black is the traditional choice and often what planners expect, so check with your local authority before ordering. Moss green suits parks and heritage railings, white and silver grey suit seafronts and modern squares, and yellow, red and blue give strong visibility at schools, car parks and hazard points. Colour-coated bollards are finished to order, so please confirm the RAL shade before you buy.
Installation, use and care
For concrete-in posts, dig a hole wide enough for a proper footing, set the post plumb with 900mm showing and backfill with concrete around the spikes. For bolt-down posts, use anchors suited to the slab. For removable posts, set the socket flush with the finished surface so the frame doesn't become a trip hazard. Galvanised posts need only an occasional wash. Touch up chips on coloured posts so the coating keeps its looks.
Frequently asked questions
Is this bollard cast iron?
No. It is galvanised mild steel tube with a welded cap and rings, so you get a traditional look with the toughness of steel. Cast iron can crack under impact.
Are fixing bolts or a padlock included?
No. Bolt-down bollards need anchors suited to your concrete, and removable bollards take a padlock you supply. We can advise on both.
How deep does the concrete-in version go?
300mm below ground, with welded fixing spikes to lock it into the footing. The removable socket also goes 300mm below ground.
Can I add chain between the posts?
Eyelets, hooks and chain can be added to this design for a decorative effect. Call us before ordering so they can be specified with the posts.
How heavy is the removable post to lift?
The post weighs 13kg; with its socket the removable version is 21kg in total.
Ordering and delivery
Choose your fixing and finish above and add to basket. For street schemes, mixed quantities, chain options or a delivery date, call 01744 520110 or email sales@industrialsuppliesco.co.uk with your quantities and site postcode, and we will confirm lead times and a delivered price.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

























