-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you are specifying street furniture for a conservation area, a market square or a school frontage, you need a bollard that stops vehicles mounting the footway without looking like a car-park post. This ornamental bollard does that with a deliberately simple traditional profile: a straight 114mm steel tube standing 900mm above ground, finished with a low domed cap on a collar ring and a single plain band set close to the base. It is sold in plain galvanised or galvanised with a powder-coat colour, and in three fixing types – concrete in, bolt down and removable – so one design can run along a whole scheme, including the access points that have to open.
Why it works
A traditional silhouette without fuss
The domed cap, collar ring and low band give the post the proportions people associate with Victorian and Georgian street bollards, while the plain tube between them keeps it clean enough for a modern civic plaza. With no fluting or cast detail to trap dirt, it is quick to clean.
Galvanised mild steel throughout
The body is mild steel tube with a 3mm wall, and the cap and rings are welded on rather than bolted, so there are no loose decorative parts to work free or be vandalised. The whole bollard is galvanised for corrosion protection; on the coloured versions the powder coat goes over the galvanising, so a paint chip does not expose bare steel.
One look, three fixings
Concrete-in posts carry welded fixing spikes on the buried section to lock them into the foundation. The bolt-down version sits on a round base plate for sites where you cannot dig. The removable version lifts out of a ground socket so emergency or delivery vehicles can get through.
- 900mm above ground, 114mm diameter, 3mm wall
- Domed cap and rings welded to the tube
- Galvanised, or galvanised plus one of seven RAL colours
- Concrete in, bolt down or removable
Where it's used
Pedestrianised high streets and market squares, conservation areas, seafront promenades, park entrances, school and church frontages, civic forecourts and harbour quays – anywhere vehicle exclusion must suit traditional surroundings.
Specifications
| Height above ground | 900mm |
|---|---|
| Tube diameter | 114mm |
| Wall thickness | 3mm |
| Material | Mild steel tube; cap and rings welded on |
| Finish | Plain galvanised, or galvanised and powder coated |
| Colours | Jet Black RAL 9005, Colza Yellow RAL 1021, Traffic Red RAL 3020, Traffic Blue RAL 5017, Moss Green RAL 6005, Silver Grey RAL 7001, Pure White RAL 9010 |
| Concrete in | 300mm below ground, welded fixing spikes |
| Bolt down | Round base plate; plate size and hole pattern not published for this line |
| Removable | Ground socket 300mm below ground; padlock to secure |
| Weight | 13kg concrete in or bolt down; removable 21kg in total, 13kg lift weight |
| Cap and ring dimensions | Not published for this line |
| Not included | Fixing bolts, padlock, concrete |
| Guarantee | 12 months when installed and used correctly |
Choosing the right option
Fixing type. Choose concrete in for permanent runs on footways and verges where you can excavate – it is the most permanent and neatest result, with nothing visible at the base. Choose bolt down where there are services, a basement, a bridge deck or a finished slab you cannot break out; it needs a sound concrete surface and anchors of your choosing. Choose removable for access points, lay-bys and gateways that must open for events, deliveries or emergency vehicles; the post lifts out (13kg lift weight) and is secured with a padlock.
Colour. Plain galvanised gives a silver-grey, low-maintenance look that weathers to a dull matt finish. Black is the usual choice in conservation areas and next to cast-iron railings, and green suits parks and gardens. Yellow and white raise visibility at school gates and car parks, while blue, red and grey are often matched to a town or estate colour scheme. If your planning authority has specified a colour, confirm the RAL code before ordering.
Installation, use and care
For concrete-in and removable versions, excavate a hole suitable for the 300mm below-ground section, set the post or socket plumb in concrete and allow it to cure before loading. Bolt-down posts should go onto a suitable concrete surface using anchors sized for the plate and ground conditions; bolts are not supplied. Wash coloured bollards occasionally with mild detergent and touch up any chips promptly. Keep removable sockets clear of grit and leaves.
Frequently asked questions
Is this suitable for a conservation area?
The traditional dome-and-band profile is designed for heritage settings, and black or green finishes are common choices. Check any specified design or colour with your conservation officer first.
Are the fixing bolts and padlock included?
No. Bolt-down anchors and the padlock for the removable version are not included, so you can choose fixings to suit your ground and keying to suit your site.
Can I order a mix of fixings in the same colour?
Yes. All three fixing types share the same above-ground design, so you can run concrete-in posts along a footway and use removable posts at the gateway in matching colours.
Does the powder coat replace the galvanising?
No. Coloured versions are galvanised first and then powder coated, giving two layers of protection.
Ordering and delivery
Select the fixing type and finish above and add to basket. For project quantities, mixed colours or site delivery, call our team on 01744 520110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

























