-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A traditional-style bollard that keeps vehicles off footways without looking like highway hardware. This 900mm ornamental bollard has a low dome cap seated on a collar ring, with a second matching ring a short way below, on a straight 76mm steel tube. It is built for town-centre schemes, conservation-area streets, school frontages, retail precincts and park entrances, where councils, contractors and landscape architects want a period look at a sensible price. You choose how it fixes – concrete in, bolt down or removable – and the finish: plain galvanised, or galvanised with one of seven RAL colour coats.
Why it works
Galvanised mild steel under the colour
The tube is mild steel with a 3mm wall, galvanised for a long service life, with the dome cap and both collar rings welded on to complete the design. The colour options are a coat applied over the galvanising rather than instead of it, so a chip in the colour coat exposes zinc, not bare steel.
Proportions that suit older streets
At 900mm above ground and 76mm in diameter, the bollard is slim enough for narrow footways and kerb lines yet tall enough for drivers and pedestrians to see. The dome-and-ring top gives the traditional outline that conservation and design officers tend to ask for, without the weight or cost of a cast iron post.
One design, three fixings
The concrete-in and removable versions carry welded fixing spikes that lock them into the concrete, while the bolt-down version mounts on a base plate for existing slabs. Heights and tops match, so a lift-out post at an access point looks identical to the fixed posts either side of it.
- 900mm above ground, 76mm x 3mm steel tube
- Dome cap and twin collar rings, welded to the tube
- Galvanised, or galvanised plus a RAL colour coat
Where it's used
Pedestrianised high streets and market squares; conservation-area footways where cars mount the kerb; school gates and drop-off points; shopping parades and precinct entrances; park gateways and churchyards; seafront promenades and harbour quays. The removable version suits service and emergency access points that only open now and then.
Specifications
| Height above ground | 900mm |
|---|---|
| Diameter | 76mm |
| Wall thickness | 3mm |
| Material | Mild steel tube with welded cap and two collar rings |
| Finish | Galvanised; or galvanised and colour coated in RAL 9005, 1021, 3020, 5017, 6005, 7001 or 9010 |
| Fixing options | Concrete in, bolt down, removable |
| Concrete-in depth | 300mm below ground, welded fixing spikes |
| Removable socket | 220mm below ground, welded fixing spikes |
| Bolt-down base plate | Plate size and hole pattern not published for this line |
| Cap and ring dimensions | Not published for this line |
| Weight | 13kg; removable version 13kg lift weight, 21kg total |
| Fixing bolts and padlock | Not included |
| Guarantee | 12 months when installed and used correctly |
Choosing the right option
Fixing type
Choose concrete in for new paving or wherever the bollard must never move: it sets 300mm into concrete and the welded spikes resist pull-out. Choose bolt down when you are fixing to an existing, sound concrete slab and cannot break out the surface; you will need anchor bolts to suit the slab, which are not included. Choose removable where a route has to open for deliveries, maintenance or emergency vehicles: the post lifts out of a socket set 220mm into the ground and is secured with a padlock you supply.
Finish and colour
Plain galvanised gives a low-maintenance silver-grey finish. Jet black (RAL 9005) is the usual choice in conservation areas and alongside black railings. Moss green (RAL 6005) sits well in parks, traffic blue (RAL 5017) and pure white (RAL 9010) suit seafronts, colza yellow (RAL 1021) raises visibility at schools and car parks, and traffic red (RAL 3020) or silver grey (RAL 7001) can match civic or corporate schemes.
Installation, use & care
For concrete in, excavate a hole to suit, set the bollard plumb at 900mm above finished level and surround it with concrete. For removable, set the socket in concrete the same way with its top flush with the finished surface. For bolt down, fix to a sound concrete surface using anchors rated for the slab. Wash colour-coated bollards occasionally and touch in any chips promptly; plain galvanised bollards need no routine maintenance.
Frequently asked questions
Is it cast iron?
No. It is galvanised mild steel tube with a welded steel cap and rings. That keeps the weight to 13kg and avoids the brittleness of cast iron.
Are fixing bolts included with the bolt-down version?
No. Fixing-down bolts are not included, and the base plate size and hole pattern are not published for this line. Call us if you need them confirmed before buying anchors.
How is the removable version locked?
The post sits in a ground socket 220mm deep and is secured with a padlock, which is not included. The lift weight is 13kg; post and socket together weigh 21kg.
Can I hang chain between the bollards?
Eyelets, hooks and chain can be specified for this range at the time of order. Call us before you order so the details can be agreed.
Ordering & delivery
Select the fixing type and finish above; prices include VAT. For quantity pricing, schemes that mix fixing types, or lead times on colour finishes, call 01744 520110 or email sales@industrialsuppliesco.co.uk. We deliver throughout the UK.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

























