-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you are specifying street furniture for a town centre, conservation area or civic square, this 1000mm ornamental bollard gives you the traditional look planners expect without the weight and cost of a cast-iron post. A straight 114mm galvanised steel tube is finished with a wide, rounded cushion cap over stepped mouldings, a short collar neck and a single raised ring band just below the head. It is offered concrete in, bolt down or removable, in plain galvanised or seven RAL colours, so one design can run from a pedestrianised high street to a school entrance or a lockable service access.
Why it works
Galvanised mild steel, not brittle castings
The post is mild steel, hot-dip galvanised for longevity, with the cap and ring welded onto the tube rather than bolted or bonded. There is no loose head to work free or be prised off, and a glancing knock from a van or a wheelie bin dents steel rather than cracking it the way a cast post can. The galvanising stays underneath the colour coat on painted versions, so a chip does not leave bare steel to rust.
A traditional profile that reads well in a row
The broad cushion cap overhangs the 114mm tube, so the bollard has a clear heritage silhouette at pavement level and from across a square. Set out in a line along a kerb or around a building frontage, the single collar ring gives a crisp, consistent detail at the same height on every post.
One design, three fixings
Concrete in suits permanent pedestrian protection, bolt down suits sites where you cannot excavate, and removable lets you open a route for deliveries, events or emergency access and close it again.
- 1000mm above ground, 114mm diameter, 3mm wall
- Galvanised mild steel, cap and ring welded on
- Concrete in, bolt down or removable in a 300mm ground socket
- Plain galvanised or galvanised plus RAL colour
Where it's used
Pedestrianised high streets and market squares, conservation-area pavements, civic and town hall frontages, school and college entrances, seafront promenades, park gateways, retail precincts and business parks. It is a good fit wherever a council or landlord wants vehicle exclusion that matches traditional lamp columns, railings and benches.
Specifications
| Height above ground | 1000mm |
|---|---|
| Tube diameter | 114mm (114.3mm on the manufacturer's drawing) |
| Wall thickness | 3mm |
| Material | Mild steel, galvanised; cap and ring welded to the tube |
| Head detail | Wide rounded cushion cap with stepped mouldings, collar neck and one raised ring band |
| Cap diameter | Not published for this line |
| Concrete in | 300mm below ground, welded fixing spikes |
| Bolt down | Base flange for bolting to a suitable concrete surface; fixing bolts not included; plate size not published |
| Removable | Lift-out post in a ground socket 300mm deep with welded fixing spikes; padlock not included |
| Weight | 14kg (concrete in and bolt down); removable 22kg total, 14kg lift weight |
| Finishes | Plain Galvanised, or galvanised and coated in RAL 9005, 1021, 3020, 5017, 6005, 7001 or 9010 |
| Guarantee | 12 months when installed and used correctly |
Choosing the right option
Fixing. Choose concrete in for permanent protection where you can dig a hole; it is the strongest and neatest finish, with the tube rising straight out of the paving. Choose bolt down for existing slabs, basements, podium decks or anywhere services rule out excavation; the slab must be sound concrete. Choose removable where the route has to open, such as service yards, market days or emergency access. The post lifts out of a flush socket that is padlocked shut, and the lift weight is 14kg.
Colour. Black (RAL 9005) is the usual choice in conservation areas and alongside traditional railings; check your local authority's street-design guide, as many specify it. Plain galvanised suits modern or coastal schemes and needs no repainting. Yellow, red and white give high visibility at school gates, car parks and hazards. Blue, moss green and silver grey are popular for seafronts, parks and business parks. Colours must be confirmed at order.
Installation, use and care
Concrete-in posts and removable sockets need a suitably sized excavation; set the spikes in concrete so the 1000mm height sits above finished ground level. Bolt-down posts need a sound concrete base and anchors suited to it (not supplied). Keep removable sockets clear of grit so the post seats fully. Wash coated posts with mild detergent and touch in chips promptly.
FAQs
Is this a cast-iron bollard?
No. It is galvanised mild steel with the cap and ring welded on. That gives the traditional look while resisting cracking under impact.
Are fixings and a padlock included?
No. Bolt-down fixing bolts and the padlock for the removable version are not included. Choose anchors suited to your concrete.
How deep is the excavation?
The concrete-in post sits 300mm below ground and the removable socket is 300mm deep, both with welded spikes. Allow extra depth and width for the concrete surround.
Can I add chain eyelets?
Eyelets, hooks and chains can be added to this design. Call us before ordering and we will confirm availability and price.
Ordering and delivery
Choose your fixing and finish above; each combination is priced individually and includes VAT. For council framework orders, larger runs, mixed colours or delivery to site, call 01744 520110 or email sales@industrialsuppliesco.co.uk and we will quote lead times and carriage.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

























