Google Top Quality Store — Verified Exceptional Shopping Experience

Ornamental Bollard 1000mm, Low Domed Cap with Two Spaced Raised Rings, Straight 114mm Steel Post, Galvanised or RAL, Cast In, Bolt Down or Removable


Price:
Sale price£284.90
Inc. Vat

Express UK Delivery (2 Working Days)

Fixing: Cast In
Finish: Galvanised

In stock, ready to ship

Trusted by Industry Professionals

Description

If you are specifying street furniture for a town centre, a conservation area or a civic forecourt, this 1000mm ornamental bollard gives you a traditional profile without the weight and cost of cast iron. It is a straight 114.3mm mild steel post with a low domed cap on a rolled lip and two raised rings set well apart in the upper half, so it reads as a period bollard from across the street while staying slim enough for narrow footways. You can order it cast in, bolt down or removable, in plain galvanised or galvanised with one of seven RAL powder-coat colours.

Why it works

Galvanised steel underneath every finish

The post is fabricated in mild steel and then galvanised, and the coloured versions are powder coated over that galvanising. That matters outdoors: if the coat is chipped by a trolley or a careless driver, the zinc layer underneath keeps rust from creeping along the tube, so the bollard looks after itself between repaints.

A proper heritage silhouette

The cap and both rings are welded to the tube rather than clipped on, so nothing works loose or goes missing. The first ring sits 209mm below the cap and the second a further 330mm down, which gives the classic “banded” look in the top half and leaves a clean plain shaft lower down where it takes knocks.

One design, three fixings

Because the same post is offered cast in, bolt down and removable, you can keep one consistent design across a whole scheme: fixed posts along the kerb, bolt-down posts where you cannot dig, and removable posts where vehicles still need occasional access.

  • 114.3mm diameter, 3mm wall mild steel tube
  • Galvanised, or galvanised plus RAL powder coat
  • Cap and two rings welded to the post
  • Welded fixing spikes on cast-in and removable versions

Where it's used

Pedestrianised high streets and market squares, heritage and conservation streets, civic buildings and town halls, school frontages, park entrances, seafront promenades and harbour quaysides, hospital and office forecourts. It is used to stop pavement parking, protect shop fronts and planters, and mark the edge of shared surfaces.

Specifications

Height above ground 1000mm
Tube diameter 114.3mm
Wall thickness 3mm
Material Mild steel, galvanised; cap and two rings welded to the tube
Top and rings Low domed cap on rolled lip; first ring 209mm below the cap, second ring 330mm below the first
Cast-in depth 400mm below ground, with welded fixing spikes
Removable socket depth 300mm below ground, with welded fixing spikes
Bolt-down base plate Base plate size and bolt pattern not published for this line; fixing bolts not included
Finishes Plain galvanised; galvanised + Jet Black RAL 9005, Colza Yellow RAL 1021, Traffic Red RAL 3020, Traffic Blue RAL 5017, Moss Green RAL 6005, Silver Grey RAL 7001 or Pure White RAL 9010
Weight 15kg (cast in and bolt down); removable 23kg including socket, 15kg lift weight
Padlock Not included with the removable version
Guarantee 12 months when installed and used correctly

Choosing the right option

Fixing. Choose cast in for the most permanent result in new paving or soft verges: it needs a hole for 400mm of post in concrete. Choose bolt down where you have a sound concrete slab and cannot excavate, such as over services or on a podium deck. Choose removable for emergency routes, market-day access or loading areas: the post lifts out of a 300mm socket set flush with the paving and is secured with your own padlock.

Colour. Black is the usual choice in conservation areas and alongside black railings and lamp columns. Green suits parks and older streetscapes, white and blue work on seafronts, and grey sits quietly against modern glazing. Plain galvanised is the lowest-cost, lowest-maintenance option. If your planning officer has set a colour, match it to the RAL number listed.

Installation, use and care

Excavate a suitable hole and set cast-in posts and removable sockets in concrete, checking plumb and height before it cures. Bolt-down posts need anchors suited to your concrete; fixings are not supplied. Rinse coated posts occasionally to remove grime and salt, and touch up any coating damage promptly. Keep removable sockets clear of grit so the post seats fully.

Frequently asked questions

Is this cast iron?

No. It is a galvanised mild steel tube with the cap and rings welded on. That keeps the weight to 15kg and avoids the brittleness of cast iron if the bollard is struck.

Are fixing bolts or a padlock included?

No. Bolt-down versions are supplied without anchors, and removable versions without a padlock, so you can use fixings and locks that suit your site and key system.

Will the coloured finish match neighbouring street furniture?

Each colour is a named RAL shade, so you can match existing railings or columns by quoting the same RAL number. Screen colours vary, so check against a physical RAL chart for critical matches.

Is it a crash-rated security bollard?

No impact rating is published for this bollard. It is a decorative traffic and pedestrian management post, not a hostile vehicle mitigation product.

Ordering and delivery

Select the fixing and finish above to see the price, which includes VAT. Coloured bollards are galvanised and then powder coated. For quantities, mixed schemes or delivery lead times, call 01744 520110 or email sales@industrialsuppliesco.co.uk and we will confirm before dispatch.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Ornamental Bollard 1000mm, Low Domed Cap with Two Spaced Raised Rings, Straight 114mm Steel Post, Galvanised or RAL, Cast In, Bolt Down or Removable

Cast In / Galvanised

£284.90 Inc. Vat

You may also like

Recently viewed