-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
When a town-centre scheme, conservation area or listed frontage needs vehicles kept off the footway without the hard look of a plain security post, this traditional ornamental bollard does the job. It stands 1000mm above ground on a substantial 139.7mm mild steel tube with a 5mm wall, finished with a welded low domed cap that sits on a single collar band. It is hot-dip galvanised, with a choice of seven RAL powder-coat colours on the concrete-in version. Highway contractors, landscape architects, councils and property managers use it to protect pedestrian zones, shopfronts and heritage paving.
Why it works
A large tube with a simple heritage profile
At 139.7mm the body reads as a proper street bollard, not a slim parking post. On wide pavements and open squares a smaller post simply gets lost. The dome-and-collar top is restrained enough to sit beside cast-iron street furniture and traditional lamp columns without competing with them.
Galvanised steel that suits the British weather
The tube is mild steel, hot-dip galvanised after fabrication so the zinc coats the inside and outside of the tube as well as the welded cap. Where a colour is specified, the powder coat goes over the galvanising rather than replacing it. If the paint is scuffed, the steel underneath is still protected.
A welded cap and a 5mm wall
The cap is welded on, so there is no loose top to work free or be lifted off. The 5mm wall gives a robust post for its weight (24kg for the fixed versions). Please note this is a decorative and demarcation bollard. No crash or impact rating is published for this line, so do not specify it where a rated hostile-vehicle barrier is required.
Where it's used
High streets and market squares, pedestrianised shopping streets, church and cathedral precincts, civic buildings, hotel and pub frontages, village greens, footway build-outs, and the edges of car parks next to listed buildings. It is also a good match for shared-surface schemes, where the kerb line is lost and posts mark the safe walking zone.
Specifications
| Height above ground | 1000mm |
|---|---|
| Tube diameter | 139.7mm |
| Wall thickness | 5mm |
| Material | Mild steel tube with welded cap |
| Top | Low domed cap on a single collar band |
| Finish | Hot-dip galvanised; galvanised and powder coated in RAL 9005, 1021, 3020, 5017, 6005, 7001 or 9010 (concrete-in only) |
| Concrete-in depth | 400mm below ground, with welded fixing spikes |
| Removable socket depth | 300mm below ground |
| Bolt-down base | Round welded base plate; plate size and bolt size not published for this line |
| Weight | Concrete in 24kg; bolt down 24kg; removable 32kg (post lift weight 24kg) |
| Lighting | None - this is the non-illuminated bollard |
| Supplied without | Fixing bolts and padlock |
| Guarantee | 12 months when installed and used correctly |
Choosing the right option
Fixing method. Concrete in is the standard and strongest fixing. The post is set 400mm into a concrete foundation, and the welded spikes key it in. Choose it for new paving and permanent positions. Bolt down suits an existing sound concrete slab that you do not want to break out. The welded round base plate is anchored to the surface, so the plate stays visible. Removable is for access points: the post lifts out of a 300mm ground socket so maintenance vehicles, markets or deliveries can pass, then drops back and is secured with your own padlock.
Finish. Bolt-down and removable versions come in plain galvanised only. Concrete-in versions are available plain galvanised or in seven colours. Black (RAL 9005) is the usual choice in conservation areas and next to black cast-iron railings. Moss green (RAL 6005) and silver grey (RAL 7001) suit parks and stone settings. Red, blue, yellow and white are useful where the post has to stand out or match a corporate scheme. Always check the colour with your conservation officer or highway authority before ordering.
Installation, use & care
Concrete-in and removable versions need a properly excavated hole and a concrete surround. Bolt-down versions must go onto a sound concrete base. Fixing bolts and padlocks are not included, so use anchors suited to your slab. Check the line and spacing before the concrete sets: posts at 1.2m to 1.5m centres generally stop cars while letting pushchairs and wheelchairs through. Galvanising needs no routine painting; wash coated posts occasionally and touch in any chips.
Frequently asked questions
Is this the illuminated version?
No. This listing is the plain, non-illuminated ornamental bollard. A lit version is sold separately.
Can I have a colour on the bolt-down or removable version?
Not on this listing. Colours are offered on the concrete-in version only, and bolt-down and removable are plain galvanised. Call us if you need something different and we will check what can be supplied.
Is it crash rated?
No impact or crash rating is published. It is a decorative and demarcation bollard for pedestrian areas, not a hostile-vehicle-mitigation product.
What is included?
The bollard (with its socket for the removable version). Fixing bolts and a padlock are not included.
Ordering & delivery
Choose your fixing method and finish above and order online. Bollards are made to order, so lead times vary with finish. For quantities, project pricing or delivery to site, call 01744 520110 or email sales@industrialsuppliesco.co.uk with your postcode and we will confirm lead time and carriage.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.











