-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need covered cycle parking that goes up on an existing concrete slab without groundworks for footings, this open-fronted cycle shelter is built for exactly that job. A single sweep of sheet forms both the roof and the back wall, curving down from a 2124mm front edge to the rear in one smooth quarter-arc, so rain is shed away from the bikes and the open front stays clear for wheeling in and out. It is supplied in lengths from 1m to 5m with a choice of clear 4mm PETG or 1mm galvanised steel cladding.
Why it works
One curved sheet does the work of a roof and a back wall
The curved roof-and-back profile means there is no gutter line or joint between roof and rear panel for driven rain to find. Water runs down the outside of the arc and away from the parking area, and the back of the shelter takes the brunt of the weather from behind. With the front and both ends open, riders can approach from three sides.
Galvanised mild steel frame, bolted down
The frame is galvanised mild steel throughout. Each leg stands on a square 140 x 140 x 10mm flange plate held by four bolts, so the shelter is surface-fixed rather than concreted in. That makes it practical to fit to an existing concrete hardstanding.
Lengths that scale with demand
Choose a 1m, 2m, 3m, 4m or 5m shelter, all 2090mm front to back. Where a site needs a longer run, extension bays in 1m to 5m lengths can be added to reach the length you need; call us and we will quote them alongside the main shelter.
- Curved quarter-arc roof and back in one sheet
- Open front and open ends for easy access
- Galvanised mild steel frame
- Bolt-down flange plates, 4 bolts per leg
- Clear 4mm PETG or 1mm galvanised steel sheet
Where it's used
The design is mainly used as a cycle shelter at schools, colleges, offices, hospitals and retail parks. The same open-fronted curved profile is also suited to bin stores, waiting areas, covered walkways, smoking and vaping points, spectator areas at sports grounds, trolley bays, pay and display or EV charging points, and youth shelters in parks and estates.
Specifications
| Length | Front height | Width (front to back) | Weight - clear PETG | Weight - galvanised sheet |
|---|---|---|---|---|
| 1m | 2124mm | 2090mm | 75kg | 80kg |
| 2m | 2124mm | 2090mm | 116kg | 128kg |
| 3m | 2124mm | 2090mm | 158kg | 175kg |
| 4m | 2124mm | 2090mm | 199kg | 222kg |
| 5m | 2124mm | 2090mm | 242kg | 271kg |
| Frame | Galvanised mild steel |
|---|---|
| Roof / back cladding | 4mm clear PETG sheet, or 1mm galvanised steel panels |
| Sides | None - open front and open ends |
| Fixing | Bolt down as standard |
| Base plates | Square flange plate 140 x 140 x 10mm, 4 bolts per plate |
| Frame tube size | Not published for this line |
| Bike capacity | Not published for this line |
| Assembly | Free-standing, assembled on site |
| Guarantee | 12 months, if installed and used correctly |
Choosing the right option
Length. Start from how many bikes you need to cover and the stands you plan to use under the shelter. A bike capacity per length is not published for this line, because it depends on the stand type and spacing you choose, so measure your stand layout against the 1m to 5m lengths and the 2090mm depth. We can check the fit for you. Cycle stands are not included.
Cladding. Clear 4mm PETG lets daylight through and keeps sight lines open, so the shelter does not create a blind spot and stored bikes stay visible to passers-by and CCTV. The 1mm galvanised steel panels give an opaque roof and back that provides shade and screens the bikes from view; it is also a heavier build, adding 5kg to 29kg depending on length.
Installation, use & care
Every leg must be bolted down to a suitable concrete surface using expanding anchor bolts, four per flange plate. The area around the installation must be flat and level, with no nearby surface irregularities or changes in gradient. The shelter is assembled on site and that assembly requires construction skill, so plan for a competent installer. Anchors are not listed as included. Delivery and installation are quoted separately.
FAQ
Does it need a concrete base?
Yes. Each leg is bolted to a suitable concrete surface with expanding anchor bolts through a 140 x 140 x 10mm flange plate, four bolts per plate. The base must be flat and level with no nearby irregularities or gradient changes.
Can I make the shelter longer than 5m?
Yes. Extension bays from 1m to 5m can be added to reach the run length you need. They are not listed as separate options here, so call or email us with the total length and we will quote the shelter and extension bays together.
How many bikes will it hold?
A capacity figure is not published for this line, because it depends on the cycle stands and spacing used underneath. Tell us your stand type and the number of spaces you need and we will advise on the right length.
Ordering & delivery
Choose your length and cladding above and add to basket, or call 01744 520110 or email sales@industrialsuppliesco.co.uk for extension bays, multiple shelters or a written quote. Lead time is not published for this line and delivery is quoted separately, so we will confirm both with you before dispatch.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



