-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
This open-ended trolley shelter gives supermarkets, garden centres and retail parks a tidy, covered home for customer trolleys right where shoppers leave them. The shelter is 2m wide. One 2m end is left completely open, so trolleys are pushed straight in and nest in three rows down the length. Both long sides and the far end are clad, and a roof curved from side to side keeps the rain off the handles and baskets. You choose a starter shelter from 1m to 5m long and can add extension bays later. The cladding is either clear 4mm PETG or 1mm galvanised steel sheet.
Why it works
Open end, closed everywhere else
Trolleys nest in a straight line, so the open end lines up with the way your staff and customers actually return them. Cladding on the other three sides stops trolleys rolling out sideways in the wind and keeps driving rain off. The open end gives 2095mm of clearance under the eaves, so a member of staff can walk in to pull a row back out.
A galvanised frame that is bolted to the ground
The frame is galvanised mild steel, the usual finish for street furniture that lives outside all year. Every leg stands on a square 140mm flange plate with four anchor bolts into concrete. Trolleys get knocked about, so a bolted frame matters.
Two cladding choices, two different looks
Clear PETG keeps the shelter light and open, so it doesn't block sightlines across a car park or shopfront. Galvanised sheet gives a solid, opaque enclosure that hides the trolleys from view and takes knocks without marking.
- Open-ended design: trolleys in at one 2m end
- Clad on both long sides and the closed end
- Roof curved side to side across the full width
- Starter lengths 1m to 5m, with extension bays to add length
- Bolt-down flange plates, four bolts per plate
Where it's used
You'll see these at supermarket and food-store car parks, DIY and garden centres, retail parks and shopping-centre collection points. The same structure is rated by the manufacturer for cycle parking, waiting areas, pay-and-display and EV charging points, and youth shelters.
Specifications
| Attribute | Value |
|---|---|
| Width | 2074mm overall roof width; 2100mm across the base plates; 1909mm between posts |
| Height | 2363mm overall; 2095mm clearance |
| Bottom rail height | 130mm above ground |
| Lengths | 1m, 2m, 3m, 4m or 5m nominal (exact overall lengths not published) |
| Frame | Galvanised mild steel (tube size not published for this line) |
| Roof and cladding | 4mm clear PETG sheet, or 1mm galvanised steel sheet |
| Roof shape | Curved side to side across the width |
| Base plates | 140 x 140 x 10mm (PETG version) or 140 x 140 x 8mm (galvanised version), 4 bolts per plate |
| Fixing | Bolt down to concrete with expanding anchor bolts (bolts not included) |
| Guarantee | 12 months, if installed and used correctly |
| Starter length | Trolley capacity | Weight, PETG | Weight, galvanised |
|---|---|---|---|
| 1m | Not published | 189kg | 208kg |
| 2m | 15 (3 rows of 5) | 281kg | 311kg |
| 3m | 30 (3 rows of 10) | 374kg | 415kg |
| 4m | 42 (3 rows of 14) | 466kg | 519kg |
| 5m | 54 (3 rows of 18) | 562kg | 626kg |
Extension bay weights and capacities are not published.
Choosing the right option
Length and capacity. Start from the number of trolleys you need to hold at peak times. A 2m shelter holds 15, a 3m holds 30, a 4m holds 42 and a 5m holds 54, all in three rows. Leave room in front of the open end so trolleys can be lined up and pushed in.
Starter shelter or extension bay. Your first shelter must be a starter shelter. An extension bay can't stand on its own; it fits onto a starter shelter of the same cladding to make the run longer. Bays come in 1m to 5m lengths, and you can order more than one.
Cladding. Pick clear PETG to keep the area bright and visible, or galvanised sheet for a solid, opaque enclosure that hides the trolleys. Choose the same cladding for the starter and its extension bays so the run matches.
Installation, use and care
The shelter comes in kit form for assembly on site, and the manufacturer says assembly needs construction skill. Each leg bolts down to a suitable concrete surface with expanding anchor bolts, which are not included. The ground around it must be flat and level, without bumps or changes in slope. Plan a concrete pad or check the existing slab before delivery.
Frequently asked questions
Can I add length later?
Yes. Extension bays from 1m to 5m attach to a starter shelter of the same cladding. Order the starter first, then add bays as your trolley numbers grow.
Are fixing bolts supplied?
No. Each base plate takes four expanding anchor bolts into concrete, and these are not included. Your installer should size them for the slab.
Does it come assembled?
No. It is designed for assembly on site by people with construction skills. Installation is not included in the price, and we can quote for it.
Ordering and delivery
Prices include VAT. Delivery and installation are quoted separately, because these are large, heavy kits. Call 01744 520110 or email sales@industrialsuppliesco.co.uk for a delivery quote, a site survey, or pricing on multi-bay runs and several shelters.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




