-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A motorcycle ground anchor gives riders a fixed, ground-level point to chain to, so the bike is held to the floor rather than to a railing or post that was never meant for the job. This galvanised steel locking loop suits staff car parks, motorcycle bays and shelters where you need a secure anchor point that stays out of the way when not in use. Choose the bolt-down version to fix onto an existing concrete slab with four high-security shear nuts and bolts, or the cast-in version to set into new or broken-out concrete with a lid that closes flush with the ground. Both are UK-made from galvanised mild steel and work with the rider's own locking chain, which is not included.
Why it works
A loop that folds away when not in use
The locking loop hinges up for use and lies down when the bay is empty. On the bolt-down unit the whole assembly stands only 20mm above the ground, so it presents a minimal trip hazard and does not catch tyres or foot traffic. On the cast-in unit the hinged lid closes over the loop and, with the lid lowered, there is nothing above ground level at all.
Solid steel where it matters
The bolt-down unit is fabricated from 20mm solid galvanised steel plate, and the cast-in locking bar is 20mm thick. Used with a good-quality chain, it gives the rider a tie point designed for the job.
Fixings that cannot simply be undone
The bolt-down version is supplied with four high-security shear nuts and bolts. Once tightened, the nut heads shear off and leave nothing for a spanner to grip. The cast-in version has no exposed fixings because the 222mm-deep socket is held in concrete.
Usable in gloves
Both the loop and the lid are designed to be operated while wearing motorcycle gloves.
Where it's used
Typical installations include staff motorcycle bays at offices, factories, hospitals and universities, residential car parks, inside cycle and motorcycle shelters and beside existing cycle racks. Space anchors 800 to 1,000mm apart so each bike has room, and keep each one at least 450mm from walls, kerbs or other obstructions.
Specifications
| Specification | Bolt Down | Cast In |
|---|---|---|
| Material / finish | Galvanised mild steel | Galvanised mild steel |
| Overall size | 20mm H x 220mm W x 300mm L | Socket 222mm H x 170mm W x 179mm L |
| Loop / locking bar | 20mm solid steel plate | 109mm H x 82mm W x 20mm D |
| Height above ground (not in use) | 20mm | Flush with lid lowered |
| Depth below ground | Surface fixed | 222mm |
| Fixings | 4 x high-security shear nuts and bolts supplied | Set in concrete, hole min. 300 x 300 x 300mm |
| Weight | 5kg | 7kg |
| Recommended spacing | 800–1,000mm between anchors; min. 450mm from any obstruction | |
| Security rating | Not published for this line | |
| Locking chain | Not included | |
| Guarantee | 12 months if installed and used correctly | |
Choosing the right option
Choose Bolt Down when you already have a sound concrete slab and want the anchor installed quickly without breaking out the surface. It fixes straight down with the supplied shear bolts, with no excavation or curing time. It leaves a low 20mm profile, so it suits marked bays rather than walkways.
Choose Cast In for new-build car parks, resurfacing projects or anywhere pedestrians cross the bay. With the lid down the anchor is flush, so there is no trip hazard at all, and because the socket is held 222mm deep in concrete there are no bolts to attack. It needs a 300mm cube excavated and concreted, so plan it in with groundworks where you can. Neither version can be fitted to tarmac alone; both need concrete.
Installation, use & care
Bolt down: position the plate on existing concrete, drill through the four corner holes and fix with the supplied high-security shear nuts and bolts, tightening until the heads shear. Cast in: excavate a hole of at least 300 x 300 x 300mm, set the socket so the top frame and closed lid sit level with the finished surface, and concrete in. Allow the concrete to cure before use. Clear grit from the hinge and socket occasionally so the loop and lid move freely.
Frequently asked questions
Is a chain or padlock included?
No. The anchor is supplied without a locking chain. Riders pass their own chain and lock through the loop and the bike's wheel or frame.
Can I fit the bolt-down version on tarmac or block paving?
It is designed to be fixed to an existing concrete surface. On tarmac or paving, cast a concrete pad first or choose the cast-in version set into its own concrete.
Is it a trip hazard when not in use?
The bolt-down unit stands only 20mm above the ground. The cast-in unit is flush with its lid lowered, so there is nothing to trip on.
Does it carry a security rating?
No independent security rating is published for this line. If your insurer needs a rated anchor, check their requirements before ordering.
Ordering & delivery
Select Bolt Down or Cast In above and add to basket. Prices include VAT. For multiple bays or help planning layouts, call our trade team on 01744 520110 or email sales@industrialsuppliesco.co.uk and we will quote for the full scheme.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



