Single Sided Mechanical Code Lock for Timber Gates up to 80mm, Lever Handle, Slam Latch, Marine Grade

A single sided mechanical code lock with a lever handle and an internal slam latch, for timber gates up to 80mm thick. People on the outside key in the code and use the lever, and people on the inside use the knob turn to leave, so the code is needed for one direction only. It is finished to a marine grade with stainless steel fixings, which matters for timber gates, where the lock is usually out in the weather and fixed into wood that moves. It has a 14 button keypad with over 8000 non-sequential codes and the code can be changed. The internal latch slams shut when the gate closes and has a holdback function, so the gate can be left unlatched when the site is open. It is rated for medium to heavy duty use.

Why this lock works

Designed for timber. The lock is made for wooden gates up to 80mm thick, and it comes with marine grade stainless fixings and a specially plated marine grade finish to stand up to outdoor conditions.

Slam latch with holdback. The gate secures itself when it is closed, which is what you need from a garden, yard or side gate, and the holdback lets you leave it free during the working day.

A wide range of codes. There are 14 buttons and over 8000 non-sequential codes, so the code is harder to work out from wear on the buttons, and it can be changed when people move on.

Cycle tested. The lock has been cycle tested to 100,000 operations, and it has an updated internal knob turn that is easier to use than the older pattern.

Where it is used

Timber side gates, yard gates and garden gates on commercial and domestic properties, up to 80mm thick. It needs no power. Because it is designed for timber, it is not the right lock for a metal box section gate, and you should use a box section code lock for that.

Specifications

Choosing the right timber gate code lock

The main choice is whether you want a code on one side or both. This lock has a keypad on one side and a knob turn on the inside, so it suits a gate where leaving must be free. If the inside also needs a code, use the keypad-both-sides lock with a rim deadbolt, which suits timber gates up to 85mm. A tubular latch version is available if you prefer a latch set into the edge of the gate.

Fitting and care

Mark out the gate using the data sheet, drill the through holes and fit the keypad unit and rear plate with the supplied stainless fixings, tightening them gradually so that the timber is not crushed. Fit the slam latch and the strike plate so that the latch engages without being forced, and test from both sides before you set your own code. Allow for the timber to swell in winter, so do not fit the gate tight in its opening.

Clear dust from around the buttons and check the fixings at routine maintenance. Change the code when staff or tenants leave. Do not lubricate the keypad mechanism with a general purpose oil spray.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.