-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Forklift and pallet-truck damage rarely starts at head height. It starts at the floor, where a wheel clips a racking footplate, a machine base or a stud wall and the repair bill follows. This low level protection rail is a short, bolt-down steel barrier that sits just above the slab and takes those knocks instead. It is made from 76mm outside-diameter galvanised mild steel tube with a 3mm wall, coated yellow with 150mm black reflective bands, and comes in 500mm, 1000mm and 2000mm lengths. It is built for warehouse managers, maintenance engineers and safety leads who need to protect racking, machinery or walls without fencing off floor space.
Why it works
Steel that is built to be hit
The rail is a round 76mm tube with a 3mm wall, so a wheel or fork tip that strikes it is turned aside rather than dug in. The galvanised base metal lasts in both internal and external warehousing, and the yellow coating sits on top of it, so a chip in the paint does not leave bare steel to rust.
Seen before it is struck
Low-level hazards are the ones drivers miss. Yellow with contrasting black reflective bands stands out against grey concrete under high-bay lighting and in headlights at a loading bay. The band count also tells you the length at a glance: one band on the 500mm, two on the 1000mm and four on the 2000mm.
Angled ends and fixed feet
Both ends are cut at an angle, so there is no square edge to catch a tyre or a pallet corner. The rail stands on welded fixing feet, two on the 500mm and 1000mm lengths and three on the 2000mm. Each foot has a bolt hole on either side of the tube, so the rail is anchored on both sides along its length.
- 76mm OD galvanised mild steel tube, 3mm wall
- Yellow coating with 150mm black reflective bands
- Angled ends, welded fixing feet, bolt-down to concrete
- 500mm, 1000mm and 2000mm lengths, 4kg, 6kg and 12kg
Where it's used
Typical positions are the end frames and first uprights of pallet racking, the bases of CNC machines, compressors and conveyors, the edges of marked pedestrian walkways, and the walls and doorways of loading bays. The rails are also used as wheel stops in front of plant rooms, charging areas and stores, where a vehicle should stop short of a wall.
Specifications
| Product | Black and yellow low level protection rail |
|---|---|
| Lengths | 500mm, 1000mm or 2000mm overall |
| Tube | 76mm outside diameter, 3mm wall thickness |
| Material | Galvanised mild steel |
| Finish | Coated yellow with black reflective bands |
| Black bands | 150mm wide; 1 (500mm), 2 (1000mm), 4 (2000mm) |
| Fixing feet | 2 (500mm and 1000mm), 3 (2000mm) |
| Ends | Angled cut |
| Fixing | Bolt down to a suitable concrete surface |
| Fixing bolts | Not included, sold separately (M10 anchors) |
| Weight | 4kg (500mm), 6kg (1000mm), 12kg (2000mm) |
| Overall height / foot plate size | Not published for this line |
| Guarantee | 12 months, if installed and used correctly |
Choosing the right option
500mm suits one racking upright, a column base or the corner of a machine, where a longer rail would block access. 1000mm covers a typical racking end frame or a machine front, and is the length most sites standardise on. 2000mm runs along a walkway edge, a wall or a long machine bed with fewer joints, and its third foot keeps it anchored along its length.
For longer runs, set rails end to end and measure the length you need to protect, rounding up so the angled ends sit past the corners rather than short of them. Leave a small gap between rails for cleaning. Place each rail far enough out from the structure that a wheel meets the steel before the asset. All three lengths fix the same way, so you can mix them in one run to suit the layout.
Installation, use and care
Bolt each rail down to a suitable concrete surface through every hole in its fixing feet. The concrete should be sound and at least 150mm deep, and M10 anchor bolts are the usual fixing. Bolts are not included, so order them with the rail. Check the floor for buried services before drilling. After any heavy impact, inspect the rail and its fixings and re-tighten or replace damaged anchors. Wash off grime now and then to keep the bands bright. If you touch up chipped coating promptly, the galvanising underneath stays protected.
Frequently asked questions
Are fixing bolts included?
No. The rail is supplied without bolts. M10 concrete anchors are the usual fixing, one per hole in the fixing feet. Please ask us if you would like suitable anchors quoted with your order.
Can it be fixed to asphalt or block paving?
It is designed to bolt down to a suitable concrete surface. Asphalt and block paving will not hold the anchors reliably under impact, so lay a concrete pad first if the area is not already concrete.
Will it stop a forklift?
It is a low-level barrier that turns wheels and fork tips away from racking, machinery and walls at floor level. No impact rating is published for this line. For higher-energy impacts, pair it with hoop barriers or full-height guarding.
Can I use it outdoors?
Yes. The range is made for internal and external warehousing, and the galvanised steel under the yellow coating resists corrosion in yards and loading bays.
How do I tell the lengths apart once they are installed?
By the black bands: one on the 500mm, two on the 1000mm and four on the 2000mm.
Ordering and delivery
Order online with the length selector above, or call 01744 520110 or email sales@industrialsuppliesco.co.uk for multi-rail runs, mixed lengths, site deliveries or a quote including fixings. Each rail is priced individually, and quantity orders for full racking aisles are welcome.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




