-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Column corners take the knocks nobody reports: a reach truck clipping the turn, an overhanging pallet, a van misjudging a car park swing. Over months a concrete arris spalls back to the reinforcement or a steel stanchion loses its paint. This steel column protector is a low, two-sided corner guard built for exactly that point of contact. Two 50 x 50mm square posts carry a single 48mm round steel rail that turns a smooth 90-degree bend around the external corner of the column, 500mm high and 471mm along each face. It suits warehouse, logistics, factory, car park and facilities managers who need a tidy, inexpensive guard on the corners that vehicles actually hit.
Why it works
It takes the hit before the column does
The rail sits in front of both faces of the corner with clear space behind it, so a wheel, fork tip or bumper meets steel first and the load goes down through the posts into the floor rather than into the structure. There is no post at the bend itself: the curved rail presents a rounded face to a vehicle coming in at an angle, which tends to glance it away instead of catching it.
Galvanised mild steel, inside or out
Every guard is mild steel, hot-dip galvanised for long life, and is listed as suitable for both internal and external use. That matters on loading bays and open car park decks. The high-visibility version is galvanised first and then coated yellow with two 50mm black reflective bands, one near each post, so drivers pick it out under low light.
Knee height, small footprint
At 500mm the guard sits at the height of forks, pallet bases, wheels and low bumpers, where most column strikes happen, without narrowing the aisle more than it needs to.
- Two-sided L-shape guards one external corner
- Single 48mm rail on two 50 x 50mm square posts
- Galvanised, or galvanised with yellow coat and black reflective bands
- Concrete in or bolt down
Where it's used
Concrete and steel columns at the ends of warehouse aisles and racking runs, loading bay and canopy columns beside dock doors, factory columns alongside forklift and pallet-truck routes, and pillars in multi-storey and underground car parks.
Specifications
| Height | 500mm |
|---|---|
| External width | 471mm |
| Internal width | 460mm |
| Rail | 48mm diameter steel tube, single rail with 90-degree bend |
| Posts | Two, 50 x 50mm square steel tube |
| Material | Mild steel, galvanised |
| Finishes | Galvanised; or galvanised and coated yellow with 2 x 50mm black reflective bands |
| Fixing | Concrete in (300mm below ground) or bolt down |
| Fixing bolts | Not included with bolt-down versions |
| Weight | Concrete in approx. 10kg; bolt down approx. 8kg |
| Use | Internal and external |
| Load or impact rating | Not published for this line |
| Guarantee | 12 months when installed and used correctly |
Choosing the right option
Column size. The guard runs 460mm along each face of the column from the corner (internal width). On a column of up to that width the posts finish at or near the far edges; on a larger column the posts stop part-way along each face, which still protects the corner, the part that takes the strikes. Check you have room for the posts and the fixing on both faces.
Height and vehicle type. 500mm suits forklifts, pallet trucks, cars and vans. Where taller loads or HGVs pass, consider a taller guard as well.
Finish. Plain galvanised is discreet and hard-wearing. Yellow with black bands is the choice where visibility counts, such as busy aisles, car parks and poorly lit bays. Other RAL colours are available to order by phone.
Fixing. Concrete in gives the firmest anchorage and suits new slabs or yards where you can excavate. Bolt down fixes to an existing sound concrete floor with no digging.
Which shape. This is the two-sided corner design. Choose a U-shaped or wrap-round guard to cover three or four faces of a column, or a multi-rail guard for heavier traffic.
Installation, use & care
Bolt-down versions fix to a suitable concrete surface through the base plates; fixing bolts are not included, so choose anchors to suit your slab. Concrete-in versions are supplied with welded fixing spikes for firm ground anchorage and need a suitable excavated hole, with the posts set 300mm below ground. Inspect after any impact and replace a bent guard rather than straightening it.
FAQ
Are fixings included?
Bolt-down versions are supplied without fixing bolts. Concrete-in versions come with welded fixing spikes on the posts and are set in concrete on site.
Can I have it in another colour?
Yes, galvanised and powder coated to a RAL colour of your choice can be ordered. Call 01744 520110 for a price; coloured guards are made to order and are non-refundable.
Is it suitable outdoors?
Yes. It is galvanised mild steel and listed for both internal and external use, including car parks and open yards.
Ordering & delivery
Choose the finish and fixing above and add to basket; each variant is priced individually. For multiple columns, other colours, larger tube sizes or delivery to site, call 01744 520110 or email sales@industrialsuppliesco.co.uk and we will quote. Lead time is confirmed when you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.





