-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
When a site boundary has to stop vehicles most of the time but open up on demand, a fixed hoop leaves you stuck and a temporary barrier looks like one. This key-locking removable hoop barrier sits in two flush ground sockets, holds the line as a solid 76mm steel hoop and lifts out with a key when a delivery, a show car or a maintenance vehicle needs to come through. It suits facilities managers, dealerships, retail landlords and groundworkers who need a permanent-looking perimeter with a recognised security rating and access on demand.
Why it works
A security rating, not just a hoop
This barrier design has achieved Sold Secure SS105:2012 Gold in the security posts category and carries Secured by Design status. Sold Secure products are tested using methods approved by the Police and the Home Office, giving you a documented answer when an insurer or landlord asks what protects the frontage.
Locks into the ground, lifts out when you need it
The legs drop into square sockets cast 270mm below ground and are secured with a radial pin tumbler key lock. Unlock it, lift the hoop out and the sockets sit flush, so vehicles and pedestrians cross the line with nothing to trip over. Lift weights run from 10kg to 27kg depending on finish and size, so most sizes can be handled by two people.
Clear sightlines
A single open hoop blocks a vehicle without hiding what is behind it. That is why this style is common on car showroom forecourts: the stock stays protected and fully visible from the road.
- 76mm round steel tube, three heights and three widths
- Hot-dip galvanised or grade 304 stainless steel
- Key-locking flush sockets, 270mm below ground
- Sold Secure SS105:2012 Gold; Secured by Design status
Where it's used
Car dealership and showroom forecourts, retail and trade-counter frontages, car park edges and footway boundaries, office plazas, service yards, and the approach to roller shutters or loading doors that must stay clear of parked vehicles but open for occasional access.
Specifications
| Tube | 76mm diameter round steel tube |
|---|---|
| Finish | Hot-dip galvanised steel, or grade 304 stainless steel |
| Height above ground | 500mm, 750mm or 1000mm |
| Overall width | 1000mm, 1500mm or 2000mm |
| Fixing | Removable; legs locate in square sockets cast into concrete |
| Socket depth | 270mm below ground |
| Excavation per socket | Approx. 300 x 300 x 300mm (indicative, from the maker's drawing) |
| Lock | Key-operated, radial pin tumbler |
| Security rating | Sold Secure SS105:2012 Gold (security posts); Secured by Design status |
| Lift weight (galvanised) | 15kg (500 x 1000) to 27kg (1000 x 2000) |
| Lift weight (stainless) | 10kg (500 x 1000) to 18kg (1000 x 2000) |
| Overall weight | Galvanised 27-39kg; stainless 22-30kg (see drawing for every size) |
| Wall thickness | Not published for this line |
| Number of keys supplied | Not published for this line - confirm when ordering |
| Guarantee | 12 months when installed and used correctly |
| Origin | Made in Britain |
Choosing the right option
Finish. Galvanised is the workhorse: a tough zinc coating that copes with rain, road salt and knocks at the lowest cost. Grade 304 stainless steel suits showrooms, offices and public realm schemes where the barrier is part of the frontage and needs to stay bright without paint.
Height. 500mm marks a boundary and stops cars at low level without blocking views; 750mm is the common all-round choice for forecourts and footways; 1000mm makes a more obvious obstacle and gives pedestrians a stronger visual cue.
Width. Match the width to the gap you need to close. A 2000mm hoop covers more ground per pair of sockets, while 1000mm units are lighter to lift and work well in a run with small gaps between them.
Installation, use & care
Excavate a hole of roughly 300mm cube for each socket, place chippings in the base for drainage, then set the sockets level and flush in concrete with the barrier located so the spacing is exact. Allow the concrete to cure before loading. To open the line, unlock with the key and lift the hoop straight out; keep the sockets clear of grit and leaves so the legs drop back in cleanly. Wipe stainless steel down periodically.
Frequently asked questions
Can one person remove it?
The lightest version (stainless, 500 x 1000mm) has a published lift weight of 10kg; the heaviest (galvanised, 1000 x 2000mm) is 27kg. The lighter sizes can be handled by one person; for the larger galvanised sizes we recommend two.
Is it 90mm tube?
This listing covers the 76mm tube version. A 90mm version exists; call us if your specification calls for it and we will quote.
Can it be colour coated?
Colour coating is available on the galvanised version at extra cost. Coloured items are non-refundable, so please call to confirm the RAL colour before ordering.
Can it be bolted down instead of cast in?
No. This is a removable barrier that relies on sockets cast into concrete. If you need a surface-fixed hoop, ask us about our bolt-down barriers.
Ordering & delivery
Choose your finish, height and width above and order online. Lead time is confirmed when you place your order. For multiple units, extra keys, colour coating or trade pricing, call 01744 520110 or email sales@industrialsuppliesco.co.uk and we will come back to you with a quote.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



