Key Clamp Male Swivel Wall Plate, Lug Flange for Female Swivel Sockets, Galvanised

A flat wall plate with a single lug, for fixing an angled tube to a wall through a female swivel socket. The plate is held to the wall by two fixings, and the lug stands off the plate with a 10mm hole for the rivet or bolt that hinges to the swivel part. On its own it does not hold a tube. It is galvanised malleable cast iron and is intended for use with the female swivel connectors, which fit it in any tube size. The price shown is for one fitting, with a minimum order of 10.

Why this plate works

Adjustable angle at the wall. With a female swivel socket on the lug, the tube can meet the wall at whatever angle the job needs.

One plate for every tube size. The plate does not depend on the tube diameter, so the same part suits any of the female swivel connectors in the range.

A simple wall fixing. Two 12mm holes on 83mm centres take your chosen wall fixings.

Where it is used

Fixing an angled tube end to a wall, such as a stair or ramp handrail meeting a wall at an angle, or a brace running back to a wall. Important: this fitting is for walls. It must not be used as an angled base fitting on the floor. For a base, use a base fitting made for the job.

Specifications

Choosing the right part

This plate is the wall half of a swivel joint. You also need a female swivel connector in your tube size, and a rivet or bolt to hinge the two together. If you would rather buy a complete wall flange with the socket already attached, choose the swivel angle wall flange in your tube size.

See the full range of galvanised key clamp fittings.

Fitting and care

Mark the two fixing holes at 83mm centres, drill for your wall fixings and fix the plate with the lug pointing out from the wall. Choose the fixings for your wall type, because a hollow or weak wall will not hold like solid masonry. Hinge the female swivel part to the lug with a suitable rivet or bolt, set the angle of the tube and tighten the grub screw in the socket.

No load rating is published for this line. Have the wall and the fixings checked by a competent person where the rail has to carry a design load.

Check the wall fixings and the hinge during routine inspections. Galvanising needs no routine care in normal conditions, and any damaged area can be touched up with a zinc-rich paint.

Frequently asked questions

Ordering and delivery

Order 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.