-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need to light a footpath, campus walkway, hotel drive or town square at low level and mark the edge of a pedestrian route at the same time, this illuminated ornamental bollard does both jobs in one post. It stands 1000mm above ground on a 139mm diameter steel tube and carries a cylindrical opal lens head between a flat stepped cap and a collar ring, lit by a 19W E27 corn lamp. It is aimed at landscape architects, local authority and estates teams, and groundworks contractors who want low-level amenity lighting that matches the rest of their street furniture, and it is offered in seven RAL powder-coat colours.
Why it works
Light where people walk
Column lighting throws light from height and can leave dark patches under trees. A bollard puts the light source at about hip height, so light falls on the surface people walk on and the posts read clearly as a line along the route. The lamp is rated at 2600 lumens at 6500K, a cool daylight white that shows paving, kerbs and level changes clearly after dark.
A protected lamp housing
The lamp sits inside an aluminium light diffuser, which is in turn protected by a polycarbonate sleeve and opaque lens. The lamp itself is IP65 rated. Set between a cap and collar rather than exposed as a globe, the head has a tidy profile that suits heritage and contemporary schemes.
Steel post, cast in
The body is a 139mm galvanised steel tube, coated in your chosen RAL colour. It is cast into concrete 500mm below ground, and welded fixing spikes on the buried section key it into the foundation so it stays firm in the ground.
- 1000mm above ground, 500mm concrete-in depth
- 19W E27 corn lamp, IP65, 6500K, 2600 lm
- Mains 240V AC supply
- Seven RAL powder-coat finishes
Where it's used
Typical settings are city squares and pedestrianised high streets, public parks and heritage footpaths, university and college campuses, hotel grounds and driveways, business park walkways and residential estate paths. It also works as wayfinding along shared cycle and pedestrian routes.
Specifications
| Height above ground | 1000mm |
|---|---|
| Depth below ground | 500mm (concrete in) |
| Tube diameter | 139mm |
| Material | Galvanised steel, powder coated |
| Fixing | Concrete in, welded fixing spikes |
| Lamp | 19W E27 corn lamp, IP65 |
| Colour temperature | 6500K |
| Luminous flux | 2600 lm |
| Lamp dimensions | 155mm long x 65mm diameter |
| Lens | Aluminium light diffuser inside a polycarbonate sleeve and opaque lens |
| Supply | Mains 240V AC |
| Light distribution | Not published for this line |
| Cable entry | Not published for this line |
| Wall thickness | Not published for this line |
| Weight | 16kg |
| Finishes | Jet Black RAL 9005, Colza Yellow RAL 1021, Traffic Red RAL 3020, Traffic Blue RAL 5017, Moss Green RAL 6005, Silver Grey RAL 7001, Pure White RAL 9010 |
| Guarantee | 12 months, if installed and used correctly |
| Origin | Manufactured in the UK |
Choosing the right option
Every variant is the same 1000mm, 139mm illuminated post with the same lamp and the same concrete-in fixing. The only choice is colour. Jet Black RAL 9005 is the conventional choice for conservation areas, parks and heritage streets, and it disappears against planting and dark paving in daylight. Moss Green RAL 6005 is the traditional parks and estates green and suits lawned settings. Silver Grey RAL 7001 and Pure White RAL 9010 suit modern office plazas, seafronts and contemporary schemes with pale paving. Colza Yellow RAL 1021, Traffic Red RAL 3020 and Traffic Blue RAL 5017 are high-visibility or brand colours. Use yellow where the post needs to stand out to drivers in car parks and service yards, and red or blue to pick up a corporate or campus colour scheme. Alongside existing street furniture, match the RAL you already use. The colour is applied to order, so confirm it first.
Installation, use and care
Excavate a hole at least 500mm deep, run the supply duct to the bollard position, set the post plumb and cast it in concrete so the welded spikes are fully embedded. The bollard needs a mains 240V AC supply. Electrical connection must be made by a qualified electrician to current UK wiring regulations. A technical file with electrical safety test results and light dispersal patterns can be requested before you specify. Clean the lens and coating with mild detergent and water, and touch in chips promptly.
Frequently asked questions
Does it need an electrician?
Yes. The bollard runs on mains 240V AC, and connection must be carried out by a suitably qualified electrician to current UK wiring regulations. Budget for the supply cable, ducting and any switching or photocell control as part of your electrical works.
Is it a crash-rated or impact-tested bollard?
No impact rating is published. Treat it as amenity lighting and pedestrian route marking, not as a vehicle security or hostile vehicle mitigation bollard.
Can it be bolted down or made removable?
This listing covers the concrete-in version only, which needs a 500mm deep foundation. No bolt-down or removable base is offered for this illuminated design here.
What colour light does it give?
The lamp is rated at 6500K, which is a cool daylight white, with a luminous flux of 2600 lumens.
Ordering and delivery
Choose your RAL colour from the options above and order online, or call our trade team on 01744 520110 or email sales@industrialsuppliesco.co.uk for multi-unit quotes, project pricing and lead times. Please check the RAL code against your scheme before ordering.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.








