-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
This is the heaviest hooped perimeter barrier in our range: 114mm diameter galvanised steel tube with a 3mm wall, joined by two 90 degree welded elbows into a wide, flat-topped hoop. Specifiers choose it for showroom forecourts, retail frontages, service yards and entrances, where vehicles need a permanent, clearly visible stop and a slimmer hoop would look undersized. It comes 500, 750 or 1000mm high and 1000, 1500 or 2000mm wide, to bolt down or concrete in. That's nine sizes in each fixing, each priced separately.
Why a 114mm hoop works
Tube size you can see from the driver's seat
At 114mm across, the tube is roughly double the diameter of a standard 48 or 60mm trolley-bay hoop. Drivers see it over the bonnet and in their mirrors, so it keeps vehicles back before anyone touches it. On a forecourt it marks the line without hiding the cars behind it.
Welded elbows and a 3mm wall
Straight tube is joined by 90 degree welded elbows rather than one long bend, so the top rail stays straight and the corners tight. After galvanising, the elbows and tube may differ slightly in appearance. That is normal and is not a defect.
Hot-dip galvanised as standard
Hot-dip galvanising protects the steel inside and out, with no paint to chip or maintain. It weathers to a dull silver-grey.
- 114mm diameter tube, 3mm wall thickness
- 90 degree welded elbows, galvanised finish
- Bolt down or concrete in (300mm below ground)
- 21kg to 38kg depending on size
Where it's used
Typical sites are car dealership forecourts and display bays, retail park frontages, trolley parks, loading-bay approaches, and the pavement outside shop doors and fire exits. Facilities managers also use it to keep cars off verges and footpaths at the edge of car parks.
Specifications
| Tube diameter | 114mm |
|---|---|
| Wall thickness | 3mm |
| Construction | Tube with 90 degree welded elbows |
| Finish | Hot-dip galvanised |
| Height above ground | 500mm, 750mm or 1000mm |
| Overall width | 1000mm, 1500mm or 2000mm |
| Bolt down fixing | Round flange plate on each leg, 6 bolts required per barrier (3 per plate) |
| Base plate size and bolt size | Not published for this line |
| Concrete in fixing | Legs set 300mm below ground, supplied with welded fixing spikes |
| Weight, 500mm high | 21kg (1000 wide), 26kg (1500 wide), 30kg (2000 wide) |
| Weight, 750mm high | 26kg (1000 wide), 30kg (1500 wide), 34kg (2000 wide) |
| Weight, 1000mm high | 30kg (1000 wide), 34kg (1500 wide), 38kg (2000 wide) |
| Guarantee | 12 months, if installed and used correctly |
Choosing the right option
Height. 500mm is a low kerb-line marker that stops a wheel without spoiling sight lines, which suits showroom display bays. 750mm is a good all-round height for car parks and frontages. At 1000mm the top rail sits at bumper and bonnet height, and pedestrians can see it clearly.
Width. Use 1000mm to protect a single doorway, meter or column. 1500mm covers a typical parking bay end. 2000mm gives the longest run per pair of fixings when you are lining a forecourt edge.
Fixing. Choose bolt down if you have a sound concrete slab and want a quick install with no digging, or if you may need to move the barrier later. Choose concrete in for new groundworks, soft or block-paved surfaces, or where you want the most permanent installation with no visible plates. The bolt down version costs more because of the flange plates.
Installation, use and care
Bolt down barriers fix to a sound concrete surface through the three holes in each flange plate, six bolts per barrier. Concrete in barriers need an excavated hole at each leg. Set the legs 300mm below finished ground level, level the top rail, and support the barrier while the concrete cures. The galvanised finish needs no routine maintenance beyond the occasional rinse on gritted sites.
Frequently asked questions
Should I choose bolt down or concrete in?
Bolt down suits existing concrete slabs and quicker installs, and the barrier can be unbolted later. Concrete in suits new surfacing or block paving and gives a cleaner look with nothing visible at the base. It does need digging and curing time.
Are the fixing bolts included?
Each bolt down barrier needs six bolts, three per plate. The bolt size and whether fixings are supplied are not published for this line. Call us before ordering and we will confirm what to use for your slab.
Why do the elbows look different from the straight tube?
The hoop is made from straight tube and welded elbows, and after hot-dip galvanising the two can take on a slightly different sheen. This is a normal result of galvanising and does not affect protection or strength.
Can I have it in a colour?
Colour coating over the galvanising is available at extra cost. It is not offered on this page, so call or email us with the RAL colour and quantities and we will quote. Coloured barriers are made to order and cannot be returned.
Ordering and delivery
Choose the height, width and fixing above and add the quantity you need. Prices include VAT. For long runs, mixed sizes, colour coating or delivery questions, call 01744 520110 or email sales@industrialsuppliesco.co.uk with your site postcode and we will advise on lead time and carriage.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



