-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A fold-down parking post you lock with your own padlock
For car parks, flats with allocated bays or your own driveway, a hinged parking post is still the most dependable way to keep a space clear. This post stands 730mm tall on a 60.3mm galvanised steel tube, hinges flat at its base when you want to drive in, and locks with an independent padlock that you choose and fit yourself. Because the lock is not built into the post, changing who has access is as quick as swapping the padlock: no locksmith, no replacement post. Please note the padlock is not supplied; the locking bar takes a shackle up to 10mm.
Why it works
A lock you control
A galvanised locking bar rises through the black protective cap on top of the post. Remove the padlock, raise or lower the post, then pass the padlock back through the bar to secure it. When a tenant moves out, a member of staff leaves or keys go missing, you replace a low-cost padlock rather than the whole unit. Sites with many bays can standardise on keyed-alike or master-keyed padlocks from any locksmith.
Locks up and locks down
The post can be padlocked upright to reserve the space and padlocked folded down so it cannot be lifted by someone else while you are parked over it. Fitted in front of a parked car, it also blocks the vehicle in as a theft deterrent.
Galvanised steel that lasts outdoors
The 60.3mm x 3mm tube and the base are galvanised steel, so they resist rust in all weathers. A reflective high-visibility label on the tube makes the post easy to see in headlights.
- Independent padlock locking (padlock not included)
- Lockable in the raised and lowered positions
- 730mm high, 60.3mm x 3mm galvanised steel tube
- Galvanised, or galvanised and yellow finish
- Bolt-down base, 2 x M16 fixings
Where it's used
Allocated bays at residential blocks and apartment car parks, private driveways, reserved spaces for directors or visitors at office car parks, staff bays at retail and industrial units, and loading or access areas that should stay clear outside working hours.
Specifications
| Height (raised) | 730mm |
|---|---|
| Tube | 60.3mm diameter x 3mm wall, galvanised steel |
| Finishes | Galvanised; galvanised and yellow (RAL 1021) |
| Locking | Independent padlock through a galvanised locking bar on top of the post |
| Padlock | Not supplied; padlock hole 10mm diameter |
| Lock positions | Raised and folded down |
| Top cap | Black protective cap |
| Visibility | Reflective high-visibility label |
| Base plate | Galvanised steel, 200 x 90mm, 152mm bolt centres |
| Hinge height | 81mm (base to top of hinge lugs) |
| Vehicle clearance | 110mm minimum |
| Fixings | 2 x M16 bolts per post (not included) |
| Installation | Bolt down to a suitable concrete surface; base recess must be clear to allow locking |
| Weight | 6kg |
| Folded height | Not published for this line |
| Guarantee | 12 months when installed and used correctly |
| Origin | Made in Britain |
Choosing the right option
Finish. Plain galvanised suits most car parks and looks tidy against tarmac or block paving. Galvanised and yellow is easier to spot in poor light and reads clearly as a "reserved" marker, so it is the usual choice where drivers are unfamiliar with the site.
Padlock or integral lock. Choose this padlock type when keys change hands often or you want one key to open many posts. If you would rather have a key lock built into the post, we list a separate integral-lock version; for emergency-access routes, choose a fire-brigade style post.
Keyed alike or random. With this post the keying depends on the padlocks you buy. Use keyed-alike padlocks for a fleet of bays one person manages, and individually keyed padlocks where each bay belongs to a different occupant.
Low cars. The manufacturer states a 110mm minimum vehicle clearance. Check that low or lowered cars clear the folded post before you order.
Installation, use and care
Bolt the base to sound concrete with two M16 bolts (sold separately). Keep the recess under the base clear of grit and leaves so the post can be locked. Choose a padlock with a shackle no thicker than 10mm. To use, remove the padlock, fold the post, then re-lock. Oil the hinge and padlock now and then.
Frequently asked questions
Is a padlock included?
No. The post is supplied without a lock so you can fit your own. The hole in the locking bar is 10mm, so choose a padlock with a shackle up to 10mm thick.
Can it be locked when folded down?
Yes. The post locks in both the raised and the lowered position, so nobody can lift it while your car is parked over it.
Are fixing bolts supplied?
No. Each post needs two M16 bolts, sold separately. The bolt holes are at 152mm centres on a 200 x 90mm base plate.
Can I fit it to block paving or tarmac?
The manufacturer specifies bolting down to a suitable concrete surface. On block paving or thin tarmac, cast a small concrete pad first so the bolts have a solid base to grip.
Ordering and delivery
Choose your finish and add to basket; the price is per post. For multi-bay sites, quantity pricing or help choosing between padlock and integral-lock posts, call 01744 520110 or email sales@industrialsuppliesco.co.uk. Ask us for lead times and delivery costs to your postcode.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




