-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A small decorative head with a rounded tip. This railhead is 110mm tall: a leaf-shaped blade topped by a 13mm ball, two flat pointed leaves that reach out to 65mm, a raised sunburst flower in a small triangle below, and a flat 31mm foot. It brings detail to low railings and garden gates without a sharp point. The price shown is for one railhead, with a minimum order of 10, enough to top about a metre of railing.

Why choose this railhead
Rounded ball tip. A 13mm ball caps the blade, so there is no sharp point at the top of a low railing or garden gate.
Decoration in a small size. Side leaves, a ribbed blade and a sunburst flower give a lot of detail in a head only 110mm tall, so it suits railings under a metre high.
Flat foot for an easy weld. The 31mm foot sits on the cut end of a 16mm to 25mm bar and gives a full ring to weld round.
Light and economical. At about 0.17 kg it is one of the lightest and lowest priced heads in the range.
Where it is used
Low front railings on dwarf walls, garden and side gates, planter and bed edging railings, balcony fronts, and decorative panels.
Specifications
| What you get | One railhead, minimum order 10 |
|---|---|
| Style | Ball-tipped blade with side leaves and sunburst |
| Material | Cast mild steel |
| Finish | Raw, unpainted |
| Height | 110mm overall |
| Width | 65mm across the side leaves |
| Leaf tips | 38mm above the base |
| Ball tip | 13mm across |
| Foot | 31mm across, 10mm deep, on a 20mm neck |
| Weight | About 0.17 kg each |
| Fixing | Weld to the top of a bar |
Which bar does it suit?
| Bar on your railing | How the 31mm foot sits |
|---|---|
| 16mm square or round | Foot overhangs about 7mm each side |
| 20mm square or round | Foot overhangs about 5mm each side, the usual choice |
| 25mm square | Foot overhangs about 3mm each side |
| Tube or box section | Weld a cap plate on first, then weld the foot to it |
How many do you need?
You need one railhead for every picket that rises above the top rail. Divide the run by your picket spacing and round up.
| Run length | At 110mm centres |
|---|---|
| 1 metre gate | 10 railheads |
| 2 metres of railing | 19 railheads |
| 3 metres of railing | 28 railheads |
| 5 metres of railing | 46 railheads |
The leaves are 65mm across, so at 110mm centres there is a 45mm gap between neighbouring heads. On stairs, landings and balconies in homes, the gap between pickets must not let a 100mm sphere pass through.
Is this the right railhead?
| You want | Choose |
|---|---|
| A small decorative head with a ball tip | This railhead |
| A slim teardrop with a ball tip | Teardrop ball-top railhead 120 x 35mm |
| A fleur-de-lys with a ball tip | Ball-tipped fleur-de-lys railhead 140 x 70mm |
| A small rounded bud | Bud railhead 74 x 36mm, 15mm spigot |
| A compact pointed spear | Spear railhead 110 x 55mm, 26mm bulb foot |
| Every railhead shape and size | All railheads |
Fitting and care
Cut every picket to the same height, then grind the cut ends flat. Stand each railhead on its bar, turn it so every face points the same way, check it is upright from the front and the side, and tack it. Run a string line across the ball tips before welding out.
Clean the weld with a flap disc, degrease, then prime with a zinc-rich or metal primer, working it into the flower detail. Hot-dip galvanising before powder coating gives the longest life outdoors.
Frequently asked questions
Is the price for one railhead?
Yes, it is for one railhead, with a minimum order of 10. For a larger run, call us for a quantity price.
Is it painted?
No. It is raw cast steel and will rust if left bare outdoors, so prime and paint it, or galvanise it, once it is welded on.
Is the ball part of the casting?
Yes. The ball tip is cast in one piece with the blade.
Is it the same on both sides?
Yes. The blade rib, leaves and sunburst are cast on both faces.
Are all the railheads exactly the same?
They are cast from the same pattern, but cast parts vary by a millimetre or two. Set them to a string line when fitting rather than measuring each one from the bar.
Ordering and delivery
Order 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 10 pcs






