304 Stainless Mini D Glass Clamp, Flat Back, 36 x 29mm, 4-6mm Glass

This mini D clamp holds a thin glass panel, 4mm or 6mm thick, to any flat surface: a square upright, a wall, a counter upstand or a cabinet side, for sneeze screens, splash screens, display stands and shop fittings. It is grade 304 stainless steel with a satin brushed finish, only 36 x 29 x 18mm, with a flat back, two countersunk closing screws and rubber pads for both 4mm and 6mm glass. It is a much smaller clamp than the balustrade clamps, sized for light screens rather than barriers. The price shown is for one clamp, with a minimum order of 8, enough for a two-panel counter screen or four wall-fixed screens.

Why use a mini D clamp

Sized for thin glass. Protection screens, sneeze guards and display panels use 4mm or 6mm toughened glass. A full-size balustrade clamp is made for 8mm to 12mm glass and looks bulky on a counter. This clamp is about a third of the size and grips thin glass properly with its own rubbers.

Flat back for square uprights and walls. Square and rectangular tube, flat bar, walls, worktop upstands and cabinet sides all need a flat-back clamp. It sits flush with no rocking, so the glass stays straight. On round tube, use the curved-back version instead.

No metal against the glass. Black rubber pads line both faces of the slot. Two sets come in the box, one for 4mm glass and one for 6mm, so the same clamp suits either thickness.

Neat and easy to clean. The satin finish matches satin stainless tube and wipes clean, which matters on food counters and in surgeries and pharmacies where screens are cleaned many times a day.

Where it is used

Sneeze screens on café, deli and buffet counters with square uprights; glass splash and privacy screens fixed to walls beside reception desks and basins; protection screens fixed to counter upstands; glass shelves and display cabinets in shops and showrooms; and low glass dividers on desks and bars.

Specifications

Other clamps

How many do you need?

Two clamps on each fixed edge of every panel, one low and one high. A screen panel between two uprights takes four clamps; a splash screen fixed to a wall along one edge takes two. The minimum order of 8 covers a two-panel counter screen or four wall-fixed screens.

Choosing the right option

Use this clamp on any flat face at least 30mm wide. For round 42.4mm tube, use the curved-back mini clamp, as a flat back will rock on a round post. Fit the rubber pads that match your glass, 4mm or 6mm. For glass 8mm or thicker, or for a balustrade that people lean on, use a full-size D clamp instead; this mini clamp is for light screens. It is 304 stainless, made for indoor use; outdoors or near the sea, choose a 316 clamp.

Fitting and care

Mark the clamp positions, then drill and fix each back plate through its central fixing hole with a screw and plug to suit the surface; the fixing is not supplied and its size is not published for this line. Set the glass on packers. Fit the rubber pads, offer up the front plates and tighten the two screws evenly until the glass is held firm, without overtightening. Clean with warm soapy water or a mild non-abrasive cleaner and a soft cloth.

Frequently asked questions

Ordering and delivery

Order 8 or more online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full screen or a batch of counters, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will check quantities and delivery before you order.