Industrial Gate Lock for 60-80mm Box Section, Surface Mounted, Silver Aluminium Handles

This is a heavy-duty surface-mounted gate lock for swing gates made from large 60mm to 80mm square box section, with silver aluminium lever handles, a self-latching day bolt and a stainless steel deadbolt locked with a key. It bolts to the face of the gate stile, so the gate does not need to be cut, and the lock box is E-coated and salt spray tested for 1000 hours, making it suitable for exposed industrial and commercial gates. The price shown is for one lock with handles and cylinder; the keep for the post is sold separately.

Why use this lock

Made for big gates. Many gate locks stop at 50mm or 60mm box section. This one suits 60mm to 80mm stiles, the sizes used on heavy industrial, school and security gates.

Latches and locks. The day bolt latches every time the gate closes, and one turn of the key throws the 23mm stainless deadbolt. The latch can also be key-locked.

Adjust without removing it. The day bolt adjusts by up to 20mm without taking the lock box off, so the lock can be set to reach the keep exactly as the gate settles. It changes over for left or right-hand gates.

Built for outdoors. The E-coated lock box is tested to 1000 hours of salt spray to ISO 9227, with a stainless steel mechanism inside, for years of use on exposed sites.

Where it is used

Pedestrian and personnel gates on industrial estates, depots, utilities and substations, schools, sports grounds, car parks and compounds, wherever the gate stile is 60mm to 80mm box section.

Specifications

What else you need

Choosing the right option

Measure the gate stile: this lock is for 60mm to 80mm box section. For 40mm garden gates use the garden gate lock, and for new gates where you want the lock hidden inside the stile, use a lock frame kit or insert lock. Order a keep for the post: the standard keep for most gates, the security keep where the gate is likely to be forced, or an electric keep for keypad or intercom release.

Fitting and care

Fix the lock to the face of the gate stile through the four holes with the screws supplied, fit the handles and cylinder, and fit the keep on the post so both bolts engage fully. Set the day bolt with the 20mm adjustment, and fit a safety cable if the gate swings. Keep the bolts clean and put a little graphite in the cylinder once a year.

Frequently asked questions

Ordering and delivery

Order online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For several gates, or to check the lock and keep suit your gate, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.