-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
The heaviest of our 100mm rings, for bold, chunky ironwork. This decorative ring is 100mm across, bent from solid 16 x 16mm square mild steel bar, so it is 16mm deep and 16mm thick with an opening of about 68mm. It suits heavy driveway gates, 16mm square bar railings and modern metal furniture where a thin ring would look lost. The price shown is for one ring, with a minimum order of 10.
Why choose this ring
Solid 16mm square bar. At just over half a kilo each, these rings have real weight and presence, and they look in proportion with 16mm square pickets and heavy flat bar rails.
Flush with 16mm bar. The ring is 16mm deep, so it sits flush with 16mm square pickets and rails front and back for clean welds.
A strong graphic shape. The thick band and smaller opening give a bold, modern look in a row, quite different from light flat strip rings.
Raw steel, ready for your finish. It comes as bare mild steel, so weld it in first, then prime and paint, or galvanise the finished panel.
Where it is used
Heavy driveway and estate gates, 16mm square bar railings, balcony infill, garden and patio furniture, fire baskets and screens, and sculptural metalwork. It is a decorative ring, not a lifting or rigging ring.
Specifications
| What you get | One ring, minimum order 10 |
|---|---|
| Material | Mild steel |
| Finish | Raw, unpainted |
| Bar size | 16 x 16mm square |
| Outside diameter | 100mm |
| Inside diameter | About 68mm |
| Depth | 16mm |
| Joint | One small butt joint |
| Weight | 0.51 kg each |
| Fixing | Weld |
How many do you need?
Set side by side and touching, each ring takes 100mm of rail, so a metre of rail takes 10 rings. For a single row between two rails, set the rails 100mm apart, inside to inside.
Is this the right ring?
| You want | Choose |
|---|---|
| A heavy 100mm ring in 16mm square bar | This ring |
| A hammered 100mm ring in 12mm square bar | 100mm ring, 12 x 12mm hammered bar |
| A deep flat band ring | 100mm ring, 20 x 6mm plain bar |
| A smooth round-bar ring | 115mm ring, 12mm round bar |
Fitting and care
Lay the rails flat, set the rings in place with the joints turned the same way, and clamp them so each ring touches its neighbours and both rails. Tack each point of contact, check the row is straight, then weld out and dress the welds. The heavy section takes more heat, so allow a little more weld than on light rings.
Clean off mill scale and weld spatter, degrease, then prime with a zinc-rich or metal primer before painting. Hot-dip galvanising before powder coating gives the longest life outdoors.
Frequently asked questions
Is the price for one ring?
Yes, it is for one ring, with a minimum order of 10. For a larger job, call us for a quantity price.
Can I use it as a lifting or tie-down ring?
No. It is a decorative ring with a butt joint and is not rated for lifting, rigging or securing loads.
Is the ring welded closed?
No. It has a small butt joint. Weld across it when you fit the ring, or place the joint against a rail.
Is it painted?
No. It is raw mild steel and will rust if left bare outdoors, so prime and paint it, or galvanise it, once it is fitted.
Ordering and delivery
Order 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 10 pcs