Black GRP Anti-Slip Step Nosing, 55 x 55mm, 1 Metre Length, Coarse Grit

A black GRP anti-slip step nosing, 55 x 55mm, in a 1 metre length. It covers the front edge of an existing step in glass reinforced plastic faced with heavy-duty coarse grit, so you get more slip resistance on the part of the step that matters most. The coarse surface is ideal for outdoor stairs exposed to the weather, and GRP will not rust or corrode. It bonds on with a polymer adhesive, screws down, or both, and cuts to size with ease. The price shown is for one length, with a minimum order of 5.

Why choose this nosing

Grit that lasts outdoors. Heavy-duty coarse grit is bonded into the face, so it keeps gripping in the wet where smooth edges do not.

A clear edge in black. Black makes a strong contrast on pale concrete or stone, so each step edge is easy to see.

Fits over what is there. It goes straight over a sound existing step, so a worn or slippery stair can be made safer without breaking out concrete or replacing treads.

Resists impact and corrosion. Glass reinforced plastic takes knocks well and does not rust, so it suits exposed locations.

Cuts to fit. Trim it to the width of the step with an abrasive or diamond blade, then seal the cut end.

Where it is used

External concrete, stone and timber steps, fire escape landings, school and hospital entrances, car parks, factories, loading bays, public buildings and other places where stairs get wet.

Specifications

Choosing the right size

The 55 x 55mm size has equal faces on the tread and riser. The 70 x 30mm size gives more width on the tread and a shorter leg on the riser. Choose the colour that contrasts best with your step, and buy 1 metre lengths for narrow steps or 3 metre lengths for wide ones.

To fix it, see our solvent free grab adhesive and skeleton gun.

Contrast and Building Regulations

At 55mm on both faces, it meets the 55mm minimum width that Approved Document K asks for on both the tread and the riser in buildings other than dwellings. This nosing is sold as meeting DDA requirements, but compliance always depends on the finished stair. Contrast is judged against the surface around the nosing: Approved Document M looks for a difference in light reflectance value of more than 30 points. Building Control or your access consultant should sign off the installed stair.

Fitting and care

Clean the step so it is dry, sound and free of loose material. Cut the nosing to width and test the fit. Run beads of polymer adhesive along the inside of both faces, press it firmly on and hold it until the adhesive has taken. On steps that are uneven, or that carry heavy traffic, add screw fixings as well. Sweep and wash it from time to time so the grit stays clear.

Frequently asked questions

Ordering and delivery

Order online for Express UK Delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.