Green PVC Coated Chicken Wire, Hexagonal Mesh, 25mm or 50mm Holes, 0.6m to 1.2m High, 10m to 50m Rolls

This green PVC coated chicken wire is a hexagonal wire netting made from galvanised steel wire with a green plastic coating, supplied on rolls. It comes in heights of 0.6m, 0.9m and 1.2m, roll lengths of 10m, 25m and 50m, and hole sizes of 25mm and 50mm, although not every combination is offered. The green finish sits more quietly among hedges, beds and planting than bright galvanised netting, which makes it a common choice for gardens, allotments and poultry runs.

Why it works

Galvanised first, then PVC coated

The steel wire is galvanised before the green PVC coating is applied. The zinc layer underneath gives the wire a base level of rust protection, and the plastic coating adds a second layer over the top. The thickness of the PVC coating is not published for this line.

A green finish that blends in

Plain galvanised netting has a bright silver finish that can stand out in a garden. The green coating helps the mesh fade into lawns, hedging, vegetable beds and borders, so runs, cages and plant guards are less visible from a distance.

Flexible hexagonal mesh

The wires are twisted together to form six-sided holes rather than welded at each joint. This keeps the netting flexible enough to unroll by hand, wrap around posts and corners, shape over hoops and frames, and cut to length with wire cutters.

Know the limits: coating and predators

This is a light netting. On its own it is not a fox-proof barrier, and a determined fox can bite through or push past it. Where foxes are a concern, use a heavier welded wire mesh for the run. The PVC coating can also be damaged by cutting, by abrasion against rough posts or stones, and by careless handling, which exposes the steel beneath.

Where it's used

The netting is typically used for:

• Chicken and poultry runs and coops
• Garden and allotment plant protection from birds and browsing animals
• Fruit cages
• Pond covers
• Pet and small animal enclosures
• Tree and shrub guards
• Garden fencing where a green finish suits the planting better than galvanised wire

Specifications

Choosing the right option

Start with the hole size, then pick the height and roll length.

25mm is the closer mesh, using 22 gauge wire. It is the better choice for keeping out smaller birds and for young poultry. Available in 0.6m, 0.9m and 1.2m heights, each in 10m and 25m rolls.

50mm is the more open mesh, using 20 gauge wire. It suits adult poultry runs, fruit cages and general plant protection. Available as 0.6m × 10m and 0.6m × 50m, and in 0.9m and 1.2m heights in 10m, 25m and 50m rolls. The 0.6m × 25m roll with 50mm holes is currently unavailable.

When choosing height, allow for any netting you intend to bury or turn outwards at ground level, and for how high the animals involved can jump or climb. 10m rolls suit small cages and repairs, while 25m and 50m rolls cover longer runs with fewer joins.

Installation, use & care

Unroll the netting along the fence line and fix it to timber or metal posts using staples, U-nails, cable ties or fencing clips. Pull the mesh taut and fix it at regular intervals, paying attention to the base so there are no gaps for animals to squeeze under. A straining wire at the top and bottom helps keep longer lengths tight. Cut with wire cutters while wearing gloves, and avoid dragging the roll over rough ground, which can scuff the coating. Cut ends expose bare steel, so check them and the fixings periodically for damage or rust, and replace any sections where the coating has worn through.

FAQ

Is PVC coated chicken wire fox-proof?

No. It keeps poultry contained and deters smaller animals, but it is not designed to stop a determined fox. For predator protection, use a heavier welded wire mesh.

Why choose green coated wire over plain galvanised?

The main difference is appearance and the added coating layer. The green finish blends into planting more easily, and the wire is galvanised underneath the PVC.

Does cutting the netting damage the coating?

Cutting leaves the steel exposed at each cut end, and scraping or abrasion can also break the coating. Handle the roll with care and inspect cut edges from time to time.

What gauge is the wire?

As listed for this range, rolls with 25mm holes use 22 gauge wire and rolls with 50mm holes use 20 gauge wire. Whether the gauge is measured before or after coating is not published for this line.

Ordering & delivery

The netting is priced per roll as listed. A minimum order of 5 rolls applies, shown when you add to basket. Delivery charges and lead times are shown at checkout.