Google Top Quality Store — Verified Exceptional Shopping Experience

Galvanised Welded Wire Mesh Panels, 6x3ft, 6x4ft and 8x4ft, 25mm to 75mm Mesh, 8 to 12 Gauge


Price:
Sale price£44.90
Inc. Vat

Express UK Delivery (2 Working Days)

Size: 1.82m x 0.91m (6ft x 3ft)
Hole Size: 25mm x 25mm
Gauge: 12 Gauge (2.5mm)

In stock, ready to ship

Trusted by Industry Professionals

Description

When you need a rigid, flat sheet of steel mesh to fence off, cover, enclose or support something, galvanised welded wire mesh panels are the straightforward answer. Whether you are building a chicken run, lining a dog pen, covering a pond, framing a fruit cage or securing part of a site, these panels give you a ready-made grid you can cut, fix and get on with. The steel wire is hot-dip galvanised before welding, the economical standard grade for most garden, smallholding and site work. Three panel sizes, four hole sizes and three wire gauges let you match the mesh to the job in front of you.

Why it works

Galvanised wire, welded into a rigid grid

Each wire is hot-dip galvanised and then welded at every crossing point. The zinc coating protects the steel against rust outdoors, and the welds stop the grid shifting, so the panel keeps its shape and the apertures stay the size you ordered. That rigidity lets a panel stand as a fence section or span a frame.

The gauge sets the strength

Gauge numbers run backwards: the larger the number, the thinner the wire. 12 gauge is roughly 2.5mm, 10 gauge roughly 3.0mm and 8 gauge roughly 4.0mm. Thicker wire resists bending and impact better, but is heavier and harder to cut.

The limitation you should know about

Because the wire is galvanised before welding, the welding can remove a small amount of zinc at the joints, so those points are where rust is most likely to appear first. If you want maximum corrosion resistance at the welds, choose a post-weld galvanised panel instead. Cut ends are the other weak point: once you cut a panel, the exposed bare steel needs sealing.

Where it's used

Around the home and garden, these panels go into chicken coops and runs, pet hutches, animal enclosures, aviaries and bird cages, dog fencing and garden fencing. Growers use them for fruit cages, climbing plant support, allotments and pond covers that keep leaves out of the water. Commercially they are used for security fencing, security cages and construction sites.

Specifications

Product type Flat welded wire mesh panel
Material and finish Steel wire, hot-dip galvanised before welding (standard grade)
Wire gauge 12g (approx. 2.5mm); 10g (approx. 3.0mm); 8g (approx. 4.0mm)
1.82m x 0.91m (6ft x 3ft) 25x25mm 12g; 50x50mm 12g; 50x50mm 10g; 75x25mm 12g (single or Pack of 4)
1.82m x 1.22m (6ft x 4ft) 25x25mm 12g; 50x50mm 12g
2.44m x 1.22m (8ft x 4ft) 25x25mm 12g; 50x50mm 12g; 75x25mm 12g; 75x75mm 8g
Weight per panel Not published for this line
Zinc coating weight Not published for this line

Choosing the right option

Start with what the mesh has to keep in or out. As a guide, 25x25mm apertures suit smaller animals and 50x50mm suits larger animals. The 75x25mm mesh gives a narrow rectangular opening, and 75x75mm is the most open grid in the range. Most options are 12 gauge; for heavier wire, 10 gauge comes only as a 6ft x 3ft panel in 50x50mm, and 8 gauge only as an 8ft x 4ft panel in 75x75mm. Larger panels mean fewer joins on a long run; 6ft x 3ft panels are easier to carry. Not every combination exists, so check the table above. If protection at the welds matters more than cost, choose a post-weld galvanised panel.

Installation, use & care

Cut panels to size with bolt cutters or an angle grinder, wearing gloves and eye protection. Every cut end exposes bare steel and may rust, so treat the ends with galvanising spray or zinc-rich paint once you have finished cutting. You can staple the mesh to timber with galvanised staples, or secure it to posts with cable ties or clips. Check cut ends and welded joints from time to time and touch up any rust spots.

FAQ

Will these panels rust?

The hot-dip galvanised wire protects the steel outdoors, but two areas need attention: the welded joints, where welding can remove a little zinc, and cut ends, which expose bare steel. Seal cut ends with galvanising spray or zinc-rich paint, and choose a post-weld galvanised panel if weld protection is a priority.

Which hole size should I choose for my animals?

As a general guide, 25x25mm suits smaller animals and 50x50mm suits larger animals. Size the mesh for the smallest animal the enclosure must hold. If you are unsure, the smaller aperture is the more cautious choice, provided it comes in your panel size.

How much does each panel weigh?

Weight per panel is not published for this line, so we cannot give a reliable figure. Larger panels and thicker wire will be heavier, and the 8 gauge, 8ft x 4ft panel is the heaviest specification in the range. Plan for two people when handling 8ft x 4ft panels.

Ordering & delivery

Each combination of size, hole size, gauge and pack is priced per variant as listed, so select the exact option you need before adding it to your basket. We deliver to the UK mainland. Large items travel flat on a pallet or by a two-person or kerbside service. Your lead time is confirmed at checkout or on your order confirmation.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Galvanised Welded Wire Mesh Panels, 6x3ft, 6x4ft and 8x4ft, 25mm to 75mm Mesh, 8 to 12 Gauge

1.82m x 0.91m (6ft x 3ft) / 25mm x 25mm / 12 Gauge (2.5mm)

£44.90 Inc. Vat

You may also like

Recently viewed