-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A single galvanised W-section palisade pale for a 2.4m high fence. Use it to replace pales that a vehicle or a break-in has bent, or to build a run from individual parts. It is 2350mm long, 70mm wide and folded from 2mm steel, with three sharp points at the head and a pre-drilled hole for the top and bottom rails. Fitted to the rail it stands 50mm clear of the ground, which brings the finished fence to 2.4m. The price shown is for one pale, with a minimum order of 5. Seventeen pales fill one 2750mm bay.
Measure before you order a repair. Pales from another maker can have different hole centres, so measure your old pale between its two holes. This one has its holes 1840mm apart.
Why this pale works
Three points are harder to get past than one. The two outer ribs of the W finish in their own points, splayed out from the central point. A row of them gives no comfortable handhold along the top of the fence.
The fold gives the strength. A flat strip of 2mm steel bends easily. Folded into a W it resists bending far better for the same weight of metal, so a pale is hard to prise aside while the fence stays see-through for your cameras and patrols.
Holes already in the right place. Each pale is pre-drilled 300mm from the top and 210mm from the bottom, so it lines up with the rail with no drilling on site and no bare steel exposed.
Galvanised for outdoor life. The pale is galvanised to EN ISO 1460 and needs no painting.
In short: three points, a stiff section and ready-drilled holes.
Where it is used
Depots, transport yards, recycling and waste sites, railway-side boundaries and plant compounds, and repairs to existing 2.4m runs where impact or a forced entry has damaged a pale.
Specifications
| What you get | One pale, minimum order 5 |
|---|---|
| For fence height | 2.4m |
| Pale length | 2350mm |
| Width | 70mm across the W section |
| Thickness | 2mm |
| Section | W section |
| Head | Triple point |
| Rail hole centres | 1840mm |
| Top hole | 300mm from the top |
| Bottom hole | 210mm from the bottom |
| Ground clearance | 50mm when fitted |
| Finish | Galvanised to EN ISO 1460 |
| Weight | About 3.22 kg each |
| Fixings | Not included |
| Delivery | Long and heavy: it may need pallet delivery at extra cost, so we will confirm delivery before dispatch |
Choosing the right pale
The pale length is 50mm less than the finished height of the fence, because the rails hold it clear of the ground. For a repair, match the hole centres of your existing pale, not just its height. For a new fence the 2.4m bay kit is simpler, because it brings together the 17 pales, post, rails and fixings for one bay.
| Fence height | Pale length | Hole centres | Weight | Choose |
|---|---|---|---|---|
| 1.8m fence | 1750mm | 1375mm | 2.4 kg | 1.8m pale |
| 2.0m fence | 1950mm | 1475mm | 2.67 kg | 2.0m pale |
| 2.4m fence | 2350mm | 1840mm | 3.22 kg | This pale |
You will also need a 2.4m post and a rail for new work, and a bay bag supplies the bolts and snap-off nuts for one bay.
See every part in our palisade fencing range.
Fitting and care
Offer the pale up to the rails with the points at the top, and line up the holes. Fix it with M8 bolts through the rail and the pale, checking that the 50mm ground gap is kept. On a repair, cut off or grind the old snap-off nuts carefully, then wear gloves and eye protection: the points and any cut edges are sharp. Treat cut or damaged areas with a zinc-rich paint. Check the pales and their fixings at routine inspections of the fence.
Frequently asked questions
Is the price for one pale?
Yes, the price is for one pale, and the minimum order is 5. Seventeen pales fill one 2750mm bay, so a new bay needs 17.
Will it fit my existing fence?
It will if your hole centres match. This pale has holes 1840mm apart and is 2350mm long. Measure your old pale between the holes before you order, because makers differ.
Are the bolts included?
No, the pale is sold on its own. Our bay bag supplies 34 M8 bolts and 34 M8 snap-off nuts, which is enough for the 17 pales in one bay.
Does it carry a security rating?
No security rating is published for this line. It is a galvanised steel pale for general perimeter fencing, so do not specify it where a rated fence is required.
How is it delivered?
Pales are long and can be heavy in quantity, so an order may need pallet delivery at extra cost. We will confirm delivery with you before dispatch.
Ordering and delivery
Order 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Palisade parts are long and heavy, so an order may need pallet delivery at extra cost. We will confirm delivery with you before dispatch.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 5 pcs