-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Everything for one 2.0m high bay of steel palisade fencing, on one order. If you are securing a yard, a depot or a plant compound, this kit saves you matching pales, post, rails and fixings line by line. You get 17 galvanised W-section pales with triple pointed heads, one 100 x 55mm post, two 45 x 45 x 5mm rails cut to give 2750mm post centres, and a bay bag holding the bolts, snap-off nuts and two fishplates. It arrives as loose parts and bolts together on site. The price shown is for one complete bay. 2.0m is the middle height, and the one most often specified for general commercial perimeters.
Before you order: a straight run always needs one more post than it has bays, because the kit includes a single post. Add one extra post to finish the line, and add end or corner fishplates where the run stops or turns.
Why this bay works
The head of the pale does the deterring. Each pale finishes in three separate points, splayed apart, so the top edge of the fence offers nothing comfortable to grip or stand on.
A W section is stiff for its weight. Folding 2mm steel into a W gives each pale far more resistance to bending than a flat strip of the same thickness, which means a fence you can see through that is still hard to force.
The fixings are meant to stay put. The bay bag uses snap-off nuts. Their outer portion shears away once they are tight, which leaves nothing for a spanner to grip from outside the fence.
It needs no paint. The pales, post and rails are galvanised to EN ISO 1460, so the zinc coating protects the steel outdoors from the day you fit it.
Where it is used
Commercial estates, distribution yards, utility compounds, plant rooms and pump stations, car parks and the rear boundaries of factories. At 2.0m it is taller than most people can easily reach over, and it still sits comfortably along a road frontage.
Specifications
| What you get | One complete bay as loose parts |
|---|---|
| Finished fence height | 2.0m |
| Bay | 2750mm finished post centres |
| Pales | 17 x 1950mm long, 2mm W section, triple point head, 70mm wide |
| Post | 1 x 100 x 55mm galvanised, 2525mm long |
| Rails | 2 x 45 x 45 x 5mm galvanised angle, 2730mm long, 17 pale holes each |
| Fixings | 34 x M8 pale bolts, 34 x M8 snap-off nuts, 4 x M12 bolts, 4 x M12 snap-off nuts, 2 x fishplates with their fixings |
| Ground clearance | 50mm under the pales |
| Finish | Galvanised to EN ISO 1460 |
| Security rating | Not published for this line |
| Weight | About 83.1 kg per bay |
| Delivery | Long and heavy: it may need pallet delivery at extra cost, so we will confirm delivery before dispatch |
Choosing the right height
Divide the length of the run by 2.75m and round up to get your bays. Ten bays need ten kits and one extra post. Keep every bay in the run the same height, because the post and pale lengths change together.
| Fence height | Pale length | Post length | Kit weight | Choose |
|---|---|---|---|---|
| 1.8m fence | 1750mm | 2325mm | 76.5 kg | 1.8m bay kit |
| 2.0m fence | 1950mm | 2525mm | 83.1 kg | This kit |
| 2.4m fence | 2350mm | 3125mm | 96 kg | 2.4m bay kit |
Only replacing damaged parts? Buy 2.0m pales, a 2.0m post, a rail or a bay bag on their own. Fishplates for the ends and corners are the end fishplate and the corner fishplate.
See every part in our palisade fencing range.
Fitting and care
Set out the line and concrete the posts at 2750mm centres, plumb and in line, leaving 525mm of post below the finished fence height. Let the concrete cure before you load the posts. Bolt the rails to the posts through the fishplates, then hang the pales with the M8 bolts, leaving the 50mm gap at the ground. Check the fence is straight before tightening the snap-off nuts fully, because they cannot be undone once sheared. Treat any cut or damaged area with a zinc-rich paint, and look the fence over at routine inspections.
Frequently asked questions
Is the price for the whole bay?
Yes. The price is for one complete 2.0m bay: 17 pales, one post, two rails and one bay bag. You will need one more post than bays to finish a straight run.
Does it come assembled?
No, it is supplied as loose parts and bolted together on site. That is what makes it practical to deliver, and it lets you follow changes of level along the run.
How deep do the posts go?
The post is 2525mm long, which leaves about 525mm below the 2.0m fence height for the foundation. Have the foundation design checked for your ground conditions and exposure, particularly on an exposed site.
Does it carry a security rating?
No rating is published for this line, so do not specify it where a rated fence is required.
Ordering and delivery
Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Palisade parts are long and heavy, so an order may need pallet delivery at extra cost. We will confirm delivery with you before dispatch.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
