Galvanised Chicken Wire, Hexagonal Mesh, 25mm, 31mm or 50mm Holes, 0.6m to 1.8m High, 10m to 50m Rolls

This galvanised chicken wire is a hexagonal wire netting supplied on rolls, made by twisting steel wire into a flexible mesh of six-sided holes. It is available in heights from 0.6m to 1.8m, roll lengths of 10m, 25m and 50m, and hole sizes of 25mm, 31mm and 50mm, though not every combination is offered. It suits poultry keepers, gardeners, allotment holders and anyone building runs, cages or plant protection.

Why it works

Flexible twisted hexagonal mesh

Each hole is formed by twisting neighbouring wires together rather than welding them. This gives the netting its familiar hexagonal pattern and makes it flexible, so it can be unrolled, bent around corners, shaped over frames and cut to length with ordinary wire cutters.

Galvanised steel for outdoor use

The steel wire is hot-dip galvanised with a zinc coating to help it resist rust and corrosion outdoors. The wire is galvanised before it is twisted, so the coating runs along the full length of each strand, including at the twists.

Light wire that is easy to handle

Wire gauge describes thickness: the higher the number, the thinner the wire. Rolls with 25mm holes use 22 gauge (0.7mm) wire, rolls with 50mm holes use 20 gauge (0.9mm) wire, and the 1.8m high rolls use a heavier 19 gauge (1.0mm) wire. A wire gauge for the 31mm hole size is not published for this line. Supplied on rolls, the netting is straightforward to carry and handle on site.

Know the limits: not a fox-proof barrier

Chicken wire is designed to keep birds and small animals in, or keep them out of beds and crops. It is a light netting, and on its own it is not a predator-proof barrier: a determined fox can bite through or push past it. Where foxes are a risk, use a heavier welded wire mesh for the run. Cut ends also expose bare steel, which may develop surface rust.

Where it's used

The netting is typically used for:

• Chicken and poultry runs, coops and small animal enclosures
• Rabbit fencing around gardens, beds and allotment plots
• Garden and allotment plant protection from birds and browsing animals
• Fruit cages
• Pond covers
• Compost bins and leaf enclosures
• Craft and garden projects that need a shapeable mesh

Specifications

Choosing the right option

Choose the hole size first, then the height and roll length.

25mm is the finest mesh. It keeps out small birds and young chicks and suits aviaries. Available in 0.6m, 0.9m and 1.2m heights in 10m, 25m and 50m rolls, plus 1.8m × 25m.

31mm is the traditional rabbit-netting size. Available as 0.6m × 50m, 1.2m × 50m and 1.35m × 50m. The 1.2m × 25m and 1.35m × 25m rolls are currently unavailable.

50mm is the most open mesh and suits poultry runs and plant protection. Available in 0.6m, 0.9m and 1.2m heights in 10m, 25m and 50m rolls, plus 1.8m × 50m.

For height, allow for any netting you plan to bury or turn out at the base, and for the jumping or climbing ability of the animals involved. Shorter rolls suit small runs and repairs; 50m rolls suit longer runs of fencing.

Installation, use & care

Unroll the netting along the line of the fence and fix it to timber or metal posts with staples, U-nails, cable ties or fencing clips. For animal enclosures, tension the mesh well and fix it securely at regular intervals so there are no loose sections or gaps at the base. A straining wire along the top and bottom helps keep longer runs taut. Cut to length with wire cutters, wearing gloves. Treat cut ends with galvanised spray or paint, and check the netting and fixings from time to time for damage or rust.

FAQ

Will chicken wire keep foxes out?

Not on its own. It keeps poultry in and smaller animals out, but it is not a predator-proof barrier. Where foxes are a risk, use a heavier welded wire mesh.

Which hole size is best for rabbits?

31mm is the traditional rabbit-netting size. Check which heights and lengths are currently available before ordering, as two 25m rolls in this size are unavailable.

Can I cut the netting to size?

Yes. It cuts easily with wire cutters. Wear gloves, and protect the cut ends with galvanised spray or paint, as exposed steel may develop surface rust.

What gauge is the wire?

22 gauge (0.7mm) for 25mm holes, 20 gauge (0.9mm) for 50mm holes, and 19 gauge (1.0mm) for the 1.8m rolls. The gauge for the 31mm hole size is not published for this line.

Ordering & delivery

The netting is priced per roll as listed. A minimum order of 4 rolls applies, shown when you add to basket. Delivery charges and lead times are shown at checkout.