Google Top Quality Store — Verified Exceptional Shopping Experience

Flame Retardant Scaffold Sheeting 2m or 3m x 45m | 180gsm Reinforced | 3 Fixing Bands | BS 7955


Price:
Sale price£290.90
Inc. Vat

Express UK Delivery (2 Working Days)

Size: 2m x 45m

In stock, ready to ship

Trusted by Industry Professionals

Description

A sheeted scaffold keeps work moving when the weather turns, and on many jobs it needs to be fire retardant too. This white scaffold sheeting has a strong polyester grid laminated on both sides with waterproof, fire retardant LDPE, and conforms to BS 7955:1999. It keeps rain, snow and wind chill off your people, holds debris inside the scaffold and screens the work until it is ready to be seen. It comes in 45m rolls, 2m or 3m wide, with three reinforced fixing bands. If you are sheeting a refurbishment, demolition or roofing job of up to six months, this is the sheet to look at. The price shown is per roll.

Guide to 2m x 45m and 3m x 45m fire retardant scaffold sheeting rolls, the 3 fixing bands, how to overlap sheets and key specifications

Why this sheeting works

Fire retardant LDPE both sides. The polyester grid is laminated on both faces with fire retardant LDPE, and the sheet conforms to BS 7955:1999. If your contract or insurer names a particular fire certificate, such as LPS 1215 or TS62, tell us before you order. This line is not sold as LPS 1215 certified.

A reinforced grid. The multifilament polyester grid gives the 180gsm sheet a tensile strength of 27.9kg in the warp and 16.6kg in the weft.

Three fixing bands, not just edge holes. A 7cm reinforced band runs along the top, centre and bottom of every sheet, with 15mm holes pre-punched every 100mm. So you can tie to the tubes wherever they fall, on all types of scaffold, with an eyelet pull-out rating of 800N.

Waterproof and light on site. The LDPE laminate is waterproof, and a roll weighs just 18.2kg for 2m or 24.8kg for 3m, so it is easy to get up the scaffold.

How long it will last on your site

This grade is for short to medium term projects, up to a recommended six months. Exposure matters, so check your site against this guide before you order.

Site Under 3 months 3-6 months
Surrounded by high buildings Yes Yes
Urban or industrial Yes Yes
Coast or offshore Yes Not advised

For 6-12 months on site, this sheet isn't recommended. Call us and we will talk through a heavier grade.

Where it is used

Use it for scaffold weather protection on refurbishment and new build work, for re-roofing jobs, and for debris containment on demolition and strip-out. It also screens work until it is ready to be revealed or secured.

Specifications

Roll sizes 2m x 45m (90m²), 3m x 45m (135m²)
Roll weight 18.2kg (2m), 24.8kg (3m)
Weight per m² 180gsm, +/-5%
Material Fire retardant LDPE on a polyester grid
Conforms to BS 7955:1999
Fixing bands 3, each 7cm wide
Fixing holes 15mm, every 100mm
Tensile strength 27.9kg warp, 16.6kg weft
Elongation 21.4% warp, 22.5% weft
Eyelet pull-out 800N
Colour White
Packed On a cardboard core, individually wrapped

Choosing the right roll

Size Good for
2m x 45m Standard scaffold lifts, with one run to a lift
3m x 45m Taller lifts and large faces, with fewer horizontal joins

To work out how many rolls you need, divide the face area by the roll area, then allow extra for your overlaps and any returns.

Fitting and care

Have the scaffold design checked first. Sheeting increases the wind load on a scaffold. The structure must be designed to the relevant British Standards and codes of practice, so get guidance from a qualified scaffold designer or structural engineer, and carry out a full risk assessment, before any sheeting goes up. Only qualified scaffolders should fit it.

Fix it horizontally. The usual pattern is one toggle tie per m², but place your fixings according to the calculations for your project.

Overlap for the job. For weather protection, lap the upper sheet over the outside of the lower sheet, so rain runs down the outside. For demolition and containment, lap the upper sheet inside the lower sheet, so debris stays within the sheeting.

Store rolls under cover, away from direct sunlight and heat, until you need them.

Frequently asked questions

Is the price per roll?

Yes. Each price is for one 45m roll, 2m or 3m wide. A 2m roll covers 90m² and a 3m roll covers 135m², before you allow for overlaps.

What fire standard does it meet?

It is made with fire retardant LDPE and conforms to BS 7955:1999. It isn't sold as LPS 1215 or TS62 certified, so if your job calls for one of those, call us before you order.

Are ties included?

No. You will need your own ties. Allow about one toggle tie per m², or follow the fixing calculations for your project.

How long can it stay up?

Up to a recommended six months on urban, industrial or built-up sites, and under three months on the coast or offshore. For longer jobs, call us about a heavier grade.

Does it fit my scaffold?

The holes in the three fixing bands are every 100mm, so it fits all types of scaffolding. Your scaffold still needs to be designed for the extra wind load.

Ordering and delivery

Choose your roll size, add the quantity you need and check out online, with Express UK Delivery to your site. For a whole building or bulk rolls, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Flame Retardant Scaffold Sheeting 2m or 3m x 45m | 180gsm Reinforced | 3 Fixing Bands | BS 7955

2m x 45m

£290.90 Inc. Vat

You may also like

Recently viewed