-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need to stop cars and vans mounting a footpath, cutting across a verge or nudging into a shop front, a short fixed post is usually the most cost-effective answer. This 750mm fixed security post is a round galvanised mild steel tube with a 3mm wall and a plastic cap sealing the top. It comes in four tube diameters (48mm, 60mm, 76mm and 90mm), two fixing types (bolt-down flange or concrete-in) and two finishes (plain galvanised, or galvanised with a yellow coat).
Why it works
Galvanised steel that lives outdoors
The tube is galvanised mild steel, so the zinc coating protects the steel from rust in UK rain, frost and road salt without regular repainting. The plastic top cap keeps water out of the tube, which helps the inside last as long as the outside.
A 3mm wall on every size
Every diameter has the same 3mm wall. That gives a solid, visible post that resists casual knocks and leaning, and it won't flex like a plastic or flexible bollard. Choose the diameter for how visible and how stout you want the post to look.
Two ways to fix it
The bolt-down version has a 5mm round flange plate welded to the base: 133mm across on the 48mm and 60mm posts, and 180mm across on the 76mm and 90mm posts. It takes three bolts into a suitable concrete surface. The concrete-in version has extended legs with welded fixing spikes and is set 250mm below ground for a firm anchorage.
Matching heights across a site
All four sizes stand 750mm above ground, so mixed diameters keep a level line.
- Galvanised mild steel tube, 3mm wall
- 48, 60, 76 or 90mm diameter
- Bolt-down flange (3 bolts) or concrete-in (250mm below ground)
- Plain galvanised or galvanised and yellow
Where it's used
Typical jobs include protecting shop and office frontages, lining pedestrian walkways on industrial estates and keeping vehicles off grass verges and landscaped beds. The posts also guard the corners of loading bays, gas meters and bin stores, and mark the edges of car parks and service yards.
Specifications
| Height above ground | 750mm |
|---|---|
| Tube diameters | 48mm, 60mm, 76mm, 90mm (round) |
| Wall thickness | 3mm (all diameters) |
| Material | Galvanised mild steel |
| Finishes | Plain galvanised; galvanised and yellow |
| Top | Plastic cap |
| Bolt-down flange | Round, 133mm x 5mm (48mm and 60mm posts); 180mm x 5mm (76mm and 90mm posts) |
| Bolts required (bolt-down) | 3 per post (not supplied) |
| Bolt size and hole pitch | Not published for this line |
| Concrete-in depth | 250mm below ground, with welded fixing spikes |
| Weight (galvanised) | 48mm 3kg; 60mm 4kg; 76mm 5kg; 90mm 6kg |
| Weight (galvanised and yellow) | Not published for this line |
| Guarantee | 12 months if installed and used correctly |
Choosing the right option
Diameter: 48mm and 60mm posts are neat and discreet. They suit pedestrian areas, shop fronts and marking edges where the post is a visual barrier more than a physical one. 76mm and 90mm posts look more substantial and stand out better in car parks and service yards, so pick these where vehicles come close.
Fixing: choose bolt-down where you already have a sound concrete slab or deep paving on a concrete base and don't want to dig. Choose concrete-in for soft ground, grass verges, tarmac over sub-base, or anywhere you can excavate a hole. A cast-in post can't be undone with a spanner, so it is the better choice where tampering is a concern.
Finish: plain galvanised blends in with street furniture and railings. Galvanised and yellow is far more visible at low level and in poor light. It is the usual choice in loading bays, car parks and anywhere drivers need to see the post easily.
Installation, use and care
Bolt-down posts need a suitable concrete surface and three anchor bolts per post. Bolts are not supplied, so choose them to suit your substrate. Concrete-in posts need an excavated hole deep enough to bury 250mm of post in concrete. Hold the post plumb while the concrete sets. Check the line and spacing before you fix the first post, so that the run is straight and gaps are narrow enough to stop a car. Galvanised steel needs little care. Replace the top cap if it goes missing, to keep water out of the tube.
Frequently asked questions
Are fixing bolts included with the bolt-down version?
No. The post is supplied without fixings. Each bolt-down post needs three bolts, and the bolt size and hole pitch are not published for this line. Choose anchors to suit your slab. If you are unsure, call us with the diameter you are ordering.
How deep does the concrete-in version go?
The post goes 250mm below ground, so the overall length is about 1000mm. It has welded fixing spikes that lock into the concrete. Dig a hole large enough to surround the buried section with concrete.
Will this stop a vehicle that drives into it deliberately?
No. It is a boundary and deterrent post, not a crash-rated or anti-ram bollard. It stops low-speed parking manoeuvres and marks no-go areas. Hostile vehicle protection needs a tested, rated product.
Ordering and delivery
Choose the finish, fixing and diameter above and add the quantity you need. For multi-post runs, trade pricing or help with the right size, call us on 01744 520110 or email sales@industrialsuppliesco.co.uk. We supply businesses and contractors across the UK.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.





