-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
This double-sided cycle shelter is built for sites that need to keep a lot of bikes dry on a modest footprint: offices, schools, colleges, hospitals, retail parks and residential blocks. A curved clear roof 4006mm wide sits on a single line of tapered steel leg frames down the middle, so you can park bikes on both sides of the frame under one roof. You can buy it as a free-standing starter shelter in 2m, 3m, 4m or 5m lengths. For a longer run, add extension bays of the same lengths. The frame is galvanised mild steel, the roof is 4mm clear PETG, and the whole shelter is open on every side.
Why it works
Central frames, cover on both sides
Each leg frame is two tapered tubes that rise from one flange plate and spread apart towards the roof, joined by two cross bars low down. Because the frames stand on the centre line, the roof overhangs equally to each side. That gives you a full 4m of cover across the shelter with no posts at the outer edges to catch pedals or handlebars. Riders can wheel in from either long side.
Height that suits cyclists and maintenance
The clearance under the roof edge is 2462mm and the overall height is 2961mm. Adults can walk a bike in without ducking, and the space stays open and well lit. The clear PETG roof lets daylight reach the bikes, which helps passive surveillance.
Galvanised steel and a curved roof
The frame is galvanised mild steel, which suits exposed car parks and school grounds. The curve of the roof sheds rain off both long edges instead of letting it pool.
- 4006mm overall width, open double-sided layout
- 2462mm clearance, 2961mm overall height
- Galvanised mild steel frame, 4mm clear PETG roof
- 2m to 5m starter shelters; extension bays in the same lengths
- Bolt-down flange plates, 1224 x 300 x 8mm, 8 bolts each
Where it's used
Typical sites are workplace cycle parks that support travel plans, school and college bike areas, NHS and council sites, retail and leisure car parks, and shared cycle stores for flats. Its wide double-sided cover suits open paved areas where bikes can approach from both sides.
Specifications
| Specification | 2m | 3m | 4m | 5m |
|---|---|---|---|---|
| Nominal length | 2000mm | 3000mm | 4000mm | 5000mm |
| Overall width | 4006mm | |||
| Height | 2462mm clearance, 2961mm overall | |||
| Starter shelter weight | 268kg | 326kg | 384kg | 443kg |
| Extension bay weight | Not published for this line | |||
| Frame | Galvanised mild steel | |||
| Roof | 4mm clear PETG sheet, curved | |||
| Sides | Open on all sides (double-sided) | |||
| Flange plate | 1224 x 300 x 8mm, 8 bolts per plate | |||
| Fixing | Bolt down as standard, expanding anchor bolts into a suitable concrete surface | |||
| Bike capacity | Not published - depends on your stand type and layout | |||
| Guarantee | 12 months, if installed and used correctly | |||
Choosing the right option
Start with a starter shelter. It is the free-standing unit, with a leg frame at each end, and you choose the length (2m, 3m, 4m or 5m) that fits your space. For a longer run, add one or more extension bays. An extension bay continues the roof from the end of a starter shelter, or from a previous bay. It cannot be used on its own, so every run needs one starter shelter. For example, a 5m starter plus a 5m extension bay gives about 10m of cover.
The manufacturer does not publish a bike capacity, because it depends on the cycle stands you choose and how you space them on each side. Stands are not part of this listing. Let us know your stand type and the number of spaces you need, and we will help you size the run.
Installation, use and care
The shelter arrives flat-packed for assembly on site, and the assembly needs construction skill. Each leg's flange plate is bolted down to a suitable concrete surface with expanding anchor bolts. The installation area must be flat and level, with no nearby surface irregularities or changes in gradient. To keep the clear roof bright, clear leaves and debris from it now and then and wash it with mild soapy water. Avoid abrasive pads.
Frequently asked questions
Can I buy an extension bay on its own?
Only to extend a shelter you already have. An extension bay carries on the roof from a starter shelter or a previous bay and is not free-standing. A new run always starts with one starter shelter.
How many bikes will it hold?
The manufacturer does not publish a capacity. Bikes park on both sides of the central frames, so the number depends on the length you choose and the stands you use. Call us with your layout and we will help you plan it.
What base does it need?
A suitable concrete surface that is flat and level. Each flange plate takes 8 expanding anchor bolts.
Are the sides or ends enclosed?
No. This shelter is open on all sides. Wall panels are not listed as an option for it.
Ordering and delivery
Choose the unit (starter shelter or extension bay) and the length, then add each item to your basket. Lead times are not published for this line, and delivery and installation are quoted separately. Call 01744 520110 or email sales@industrialsuppliesco.co.uk to arrange a site survey, plan a multi-bay run, or get a delivery and installation quote.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



