-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need covered cycle parking that keeps rain off from the back and both sides, this free-standing shelter does that job. The roof sweeps down in a single quarter-circle curve to form the rear wall, both ends are closed with full-height panels, and the front stays open or is closed off with mesh gates. It stands 2124mm high at the front and 2090mm deep overall. Starter shelters come in 1m to 5m lengths, and matching extension bays let you build a longer run. Schools, workplaces, hospitals and housing managers use it where bikes need to stay dry and out of the wind.
Why it works
One curve does the roof and the back
The roof and rear wall are one continuous curved surface, so there is no separate back wall to join to the roof. Rain runs down the curve and away from the bikes. The front is upright at full height, so riders can wheel in without ducking.
Closed ends cut the crosswind
Each end is fully clad, not left open like a simple canopy, so rain is kept out from the sides as well as from above. The curved back stops 130mm above the ground, so the foot of the shelter is easy to sweep out.
A choice of two claddings on a galvanised frame
The frame is galvanised mild steel throughout. Clad it in 4mm clear PETG sheet to keep the inside light and easy to see into, which helps with passive supervision. Or choose 1mm galvanised steel panels for a solid, opaque enclosure that hides what is parked inside.
- Quarter-curve roof and back, closed ends, open front or mesh gates
- 2124mm front height, 2090mm overall depth, 1950mm leg centres
- 4mm clear PETG or 1mm galvanised steel panels
- 140 x 140 x 10mm square foot plates, 4 bolts per plate
Where it's used
Typical sites are school and college grounds, office and business park car parks, hospital staff areas, and courtyards serving blocks of flats. The manufacturer also lists sports and spectator areas and youth shelters as suitable uses. Choose the mesh-gate option where bikes are left all day or overnight. Choose the open front where people come and go all day.
Specifications
| Length | Clear PETG weight | Galvanised sheet weight |
|---|---|---|
| Starter shelter 1m | 138kg | 154kg |
| Starter shelter 2m | 179kg | 201kg |
| Starter shelter 3m | 220kg | 248kg |
| Starter shelter 4m | 261kg | 295kg |
| Starter shelter 5m | 304kg | 343kg |
| Extension bay 1m | 57kg | 62kg |
| Extension bay 2m | 98kg | 110kg |
| Extension bay 3m | 140kg | 157kg |
| Extension bay 4m | 181kg | 204kg |
| Extension bay 5m | 224kg | 253kg |
| Front height | 2124mm |
|---|---|
| Overall depth | 2090mm (1999mm roof depth, 1950mm leg centres) |
| Lengths | Starter 1m, 2m, 3m, 4m, 5m; extension bays 1m to 5m |
| Frame | Galvanised mild steel |
| Cladding | 4mm clear PETG sheet, or 1mm galvanised steel panels |
| Foot plates | Square 140 x 140 x 10mm, 4 bolts per plate |
| Fixing | Bolt down to suitable concrete with expanding anchor bolts |
| Gate weights, gate opening width and locking | Not published for this line |
| Bike capacity | Not published for this line |
| Guarantee | 12 months, if installed and used correctly |
The weights above are for the shelter without gates.
Choosing the right option
Length. Pick the starter shelter length that suits your space and how many bikes you need to park. The manufacturer does not publish a bike capacity, so plan the spacing around the stands you will use inside. Stands are not included.
Starter and extension bays. A starter shelter is a complete free-standing unit with both ends closed. An extension bay is not a stand-alone shelter. It attaches to a starter shelter to lengthen the run, so order it alongside a starter of the same cladding and gate type. For a run longer than one starter plus one bay, call us.
Cladding. Choose clear PETG for light and visibility. Choose galvanised sheet for privacy and a solid, opaque finish.
Gates. The open front gives quick everyday access. Mesh gates close off the front with framed welded-mesh double gates, so the shelter becomes a gated enclosure you can still see through.
Installation, use & care
The shelter is designed for assembly on site, and the manufacturer states that assembly needs construction skill. Each leg must be bolted to a suitable concrete surface with expanding anchor bolts. The surrounding area must be flat and level, with no nearby surface irregularities or changes in gradient. Delivery and installation are quoted separately. Check the anchor bolts and foot plates as part of your routine site inspections.
FAQ
Can I add more length later?
Yes. Extension bays from 1m to 5m attach to a starter shelter. Match the cladding and gate option to the existing shelter, and tell us its length when you order.
Does it come with fixings?
The manufacturer specifies expanding anchor bolts into concrete, 4 per foot plate, but does not state whether they are supplied. Ask us when you order and we will confirm.
How many bikes will it hold?
A capacity figure is not published for this line. It depends on the stands and spacing you use. Send us your layout and we will help you plan the number of bays.
Can it go on grass or block paving?
The fixing guidance calls for a suitable, flat and level concrete surface. On grass or loose surfaces you will need a concrete base or pad first.
Ordering & delivery
Call 01744 520110 or email sales@industrialsuppliesco.co.uk to arrange a site survey, plan a multi-bay run or get a delivery and installation quote. Lead times are not published for this line, so we confirm them when you order. Trade and public-sector orders are welcome.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.






