-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need a stand that people recognise from across a showground, this package gives you the three surfaces that matter most: a full-colour printed canopy, a full-height printed back wall and a full set of plain sidewalls to close the shelter in. It suits exhibitors, retailers, clubs and event teams who want branding, weather protection and a frame built for repeated use in one order.
Warranty: 12 months on the package against manufacturing faults, plus frame cover by grade (1 year on 39mm square steel, 2 years on 46mm aluminium hex, 3 years on 58mm aluminium hex) and lifetime cover on joints and brackets. Weather and anchoring damage isn't covered, so weigh down or peg every leg (see Weigh it down below).
Why it works
Print that covers the whole surface
The canopy and back wall are dye-sublimation printed, so the ink goes into the fabric rather than sitting on top as vinyl. Photographs, gradients and any number of colours cost the same as one logo, and the print will not crack or peel when folded.
A back wall that does the selling
Printed on the side facing your visitors, the back wall is a large flat panel for your name, offer or a photographic backdrop, and it shields stock and staff from wind behind.
Sidewalls and a frame for British weather
The plain sidewalls are 600D PVC-coated polyester, so you can close sides against rain and open them when the sun returns. Frames run from 39mm square steel for occasional use to 58mm aluminium hex with cast alloy joints for weekly trading. Every frame adjusts to five heights in 75mm steps.
In short: printed canopy and back wall, plain sidewalls, three frame grades, 23 combinations, free artwork help and a proof first.
Where it's used
County and agricultural shows, trade exhibitions, farmers' markets, sports clubs, race days, fundraisers, dealership forecourts, sampling tours and corporate hospitality.
Specifications
| Package contents | Printed canopy, 1 x full-height back wall (printed one side), 1 x full set of plain stock-colour sidewalls, frame, storage bag, guy ropes, pegs |
|---|---|
| Print method | Dye-sublimation, full colour, unlimited colours and logos |
| 39mm square steel frame | White powder coated, nylon joints; 1-year frame warranty |
| 46mm aluminium hex frame | Nylon joints; 2-year frame warranty |
| 58mm aluminium hex frame | Cast alloy joints; 3-year frame warranty; standard 3m x 3m frame tested to 100 km/h gusts when strapped down |
| Warranty | Package 12 months; frame as above; lifetime on joints and brackets |
| Height adjustment | 5 settings, 75mm steps |
| Sidewall fabric | 600D polyester, PVC-coated, waterproof |
| Printed canopy fabric weight / fire certificate | Not published for this line |
| Artwork formats | Vector PDF, AI, EPS or CDR; other files redrawn free |
Choosing the right option
39mm steel suits a few events a season on sheltered sites and is the lowest-cost printed package. 46mm aluminium is the all-round choice for regular markets: lighter aluminium, thicker legs and the most sizes, down to 1.5m x 1.5m. 58mm aluminium is for weekly trading and exposed or coastal sites, and is the only grade at 4m x 4m, 4m x 6m and 4m x 8m.
Check your pitch first; most shows sell 3m x 3m or 3m x 6m. Compact frames fold shorter for car boots (the 2m x 2m Compact folds to about 110cm). 3m x 2m comes only on 58mm; 2m x 3m only on 39mm and 46mm. Spare frames are sold separately: 39mm steel, 46mm aluminium and 58mm aluminium.
Installation, use and care
Two people can open the frame and fit the canopy and walls without tools. Lower the legs to the shortest setting before folding. Anchor every leg and use the guy ropes in wind. Dry the fabric within 24 hours to prevent mildew, and wipe with mild soapy water; never use solvents or a pressure washer on the print.
Weigh it down
Sizes up to 4m x 4m have four legs; 3m x 6m, 4m x 6m and 4m x 8m have six.
- 12kg interlocking steel leg weights (pair): hard standing; fits 39mm and 46mm legs, not confirmed on 58mm.
- Sandbag weights, set of 4 or 6: strap-on, about 8kg per leg; fit all three frames.
- Gazebo tie-down kit: 200mm pegs and guy ropes, soft ground only, 4-leg or 6-leg; on 58mm frames choose the heavy-duty kit.
- Heavy-duty tie-down kit: 330mm galvanised stakes and cam-lock straps, soft ground, 4-leg or 6-leg; all three frames.
FAQ
Are the sidewalls printed?
No, they are plain stock colours. Ask us for a quote if you want printed sidewalls.
Will I see my design before printing?
Yes. You receive a digital proof, can request amendments, and nothing is printed until you approve it.
What if my logo is low resolution?
Send what you have. It is redrawn as a vector file free of charge, so it prints cleanly even on a 6m canopy.
Can the gazebo stay up overnight?
Only in calm, settled weather and fully anchored. Pop-up gazebos are temporary shelters; take it down if strong winds are forecast.
Ordering and delivery
Choose your frame and size and place your order; we then contact you to collect your logo, text and images. Each package is printed to order: allow 10 to 20 days from proof approval, plus delivery to UK mainland addresses. Report transit damage within 48 hours. Personalised prints cannot be returned for change of mind.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
