-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need covered cycle parking for staff, students or visitors, this single-sided shelter puts the roof and the bike stands into one bolt-down structure. The back and roof are one continuous curve, and the cycle stands are built into the frame rather than fixed to the ground as separate items. You choose a starter shelter from 1 m to 5 m long, add extension bays where you need a longer run, and pick either a clear 4 mm PETG roof or a 1 mm galvanised steel sheet roof. It is free-standing and made for on-site assembly on a concrete base.
Why it works
One curve for back and roof
The cladding runs from a low rail at ground level, up the curved back and over to the front roof beam in one sweep. There is no separate back wall to join to a roof. The result is a 2,124 mm high front and a roof that projects 1,999 mm towards the user, giving cover over the whole length of a parked bike.
Stands that are part of the frame
Each stand is an inverted hoop, 819 mm high, linked by an angled arm to the rear rail of the shelter. Because the stands are integral, there is no second set of products to buy, set out and fix.
Two cladding choices
The clear PETG roof keeps the area under the shelter bright and lets people see into the shelter. The galvanised sheet roof is fully opaque and gives an all-metal look.
- Galvanised steel tube frame, bolt down
- Integral cycle stands
- Extension bays for longer runs
Where it's used
Typical sites are office and business park staff entrances, factory and warehouse yards, college and university campuses, schools, hospitals, leisure centres and transport interchanges. The single-sided form sits neatly against a boundary wall, fence line or building.
Specifications
| Nominal length | Front height | Overall depth | Weight, clear PETG roof | Weight, galvanised roof |
|---|---|---|---|---|
| 1 m | 2124 mm | 2090 mm | 82 kg | 88 kg |
| 2 m | 2124 mm | 2090 mm | 131 kg | 143 kg |
| 3 m | 2124 mm | 2090 mm | 188 kg | 205 kg |
| 4 m | 2124 mm | 2090 mm | 237 kg | 260 kg |
| 5 m | 2124 mm | 2090 mm | 287 kg | 315 kg |
| Frame | Galvanised steel tube |
|---|---|
| Roof and back | 4 mm clear PETG sheet, or 1 mm galvanised sheet steel panels |
| Sides | None: open front and open ends |
| Roof projection | 1999 mm |
| Fixing centres (front to back) | 1950 mm |
| Cycle stand height | 819 mm |
| Base plates | 140 x 140 x 10 mm square flange plate, 4 bolts per plate |
| Fixing | Bolt down as standard, expanding anchor bolts into a suitable concrete surface |
| Extension bay weights | Not published for this line |
| Bike capacity per length | Not published for this line |
| Guarantee | 12 months, if installed and used correctly |
Choosing the right option
Length. Every starter shelter is 2,090 mm deep, so length is the figure that decides how many bikes you can cover. Measure the run available, leaving room in front for riders to wheel bikes in and out. As capacity per length is not published, send us your target number of bikes and we will confirm the layout.
Starter shelter and extension bays. Every run starts with one starter shelter. Extension bays, also 1 m to 5 m long, attach to a starter shelter to make a longer continuous run; an extension bay is not a free-standing unit and must be ordered with, or added to, a starter shelter.
Cladding. Choose clear PETG for a lighter, more open look and good visibility under the roof. Choose galvanised sheet for an opaque, all-metal shelter.
Installation, use and care
The shelter is supplied for on-site assembly, and assembly requires construction skill. Each leg is bolted down to a suitable concrete surface using expanding anchor bolts, four per base plate. The area around the installation must be flat and level, with no nearby surface irregularities or changes in gradient. Delivery and installation are not included in the price and are quoted separately. Check fixings periodically and keep the roof clear of debris.
FAQ
Can I add to the shelter later?
Yes. Extension bays from 1 m to 5 m fit to a starter shelter to lengthen the run. An extension bay cannot stand on its own, so you always need one starter shelter at the beginning of a run.
Does it need a concrete base?
Yes. Each leg is bolted to a suitable concrete surface with expanding anchor bolts through a 140 x 140 x 10 mm base plate. The surrounding area must be flat and level.
Are the bike stands included?
Yes. The cycle stands are integral to the frame, each an 819 mm high hoop braced back to the rear rail, so no separate stands are needed.
Is it enclosed or lockable?
No. It is a single-sided shelter with an open front and open ends. Riders lock their bikes to the integral stands.
Ordering and delivery
Select starter shelter or extension bay, then length and cladding, and add to basket. Delivery and installation are quoted separately. For site surveys, multi-bay runs or a delivery quote, call 01744 520110 or email sales@industrialsuppliesco.co.uk with your site postcode, the run length you need and your target number of bikes.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




